A 700 MHz laser radar receiver realized in 0.18 μm HV-CMOS

This study presents a CMOS receiver chip realized in 0.18 µm High-Voltage CMOS (HV-CMOS) technology and intended for high precision pulsed time-of-flight laser range finding utilizing high-energy sub-ns laser pulses. The IC chip includes a trans-impedance preamplifier, a post-amplifier and a timing comparator. Timing discrimination is based on leading edge detection and the trailing edge is also discriminated for measuring the width of the pulse. The transimpedance of the channel is 25 kΩ, the uncompensated walk error is 470 ps in the dynamic range of 1:21,000 and the input referred equivalent noise current 450 nA (rms).     

Ultrasonic assessment of cortical bone thickness in vitro and in vivo

In osteoporosis, total bone mass decreases and the thickness of the cortical layer diminishes in the shafts of the long bones. In this study, a simple ultrasonic in vivo method for determining the thickness of the cortical bone layer was applied, and the suitability of two different signal analysis techniques, i.e., envelope and cepstral methods, for measuring cortical thickness was compared. The values of cortical thickness, as determined with both techniques, showed high linear correlations (r ges 0.95) with the thickness values obtained from in vitro measurements with a caliper or in vivo measurements by peripheral quantitative CT (pQCT). No systematic errors that could be related to the cortical thickness were found. The in vivo accuracy of the measurements was 6.6% and 7.0% for the envelope and cepstral methods, respectively. Further, the in vivo precision for the envelope and cepstral methods was 0.26 mm and 0.28 mm, respectively. Although the results are similar for both of the techniques, the simplicity of the envelope method makes it more attractive for clinical applications. In conclusion, a simple ultrasound measurement provides an accurate estimate of the cortical bone thickness. The techniques investigated may have clinical potential for osteoporosis screening and therefore warrant more extensive clinical investigations with healthy and osteoporotic individuals.     

Materials design principles of ancient fish armour

Knowledge of the structure-property-function relationships of dermal scales of armoured fish could enable pathways to improved bioinspired human body armour, and may provide clues to the evolutionary origins of mineralized tissues. Here, we present a multiscale experimental and computational approach that reveals the materials design principles present within individual ganoid scales from the 'living fossil' Polypterus senegalus. This fish belongs to the ancient family Polypteridae, which first appeared 96 million years ago during the Cretaceous period and still retains many of their characteristics. The mechanistic origins of penetration resistance (approximating a biting attack) were investigated and found to include the juxtaposition of multiple distinct reinforcing composite layers that each undergo their own unique deformation mechanisms, a unique spatial functional form of mechanical properties with regions of differing levels of gradation within and between material layers, and layers with an undetectable gradation, load-dependent effective material properties, circumferential surface cracking, orthogonal microcracking in laminated sublayers and geometrically corrugated junctions between layers.     

Second-harmonic generation imaging of metal nano-objects with cylindrical vector beams

We introduce an imaging technique based on second-harmonic generation with cylindrical vector beams that is extremely sensitive to three-dimensional orientation and nanoscale morphology of metal nano-objects. Our experiments and second-harmonic field calculations based on frequency-domain boundary element method are in very good agreement. The technique provides contrast for structural features that cannot be resolved by linear techniques or conventional states of polarization and shows great potential for simple and cost-effective far-field optical imaging in plasmonics.     

The complexity and challenges of determining GHG (greenhouse gas) emissions from grid electricity consumption and conservation in LCA (life cycle assessment) – A methodological review

The way in which GHG (greenhouse gas) emissions associated with grid electricity consumption is handled in different LCA (life cycle assessment) studies, varies significantly. Apart from differences in actual research questions, methodological choices and data set selection have a significant impact on the outcomes. These inconsistencies result in difficulties to compare the findings of various LCA studies. This review paper explores the issue from a methodological point of view. The perspectives of ALCA (attributional life cycle assessment) and CLCA (consequential life cycle assessment) are reflected. Finally, the paper summarizes the key issues and provides suggestions on the way forward. The major challenge related to both of the LCA categories is to determine the GHG emissions of the power production technologies under consideration. Furthermore, the specific challenge in ALCA is to determine the appropriate electricity production mix, and in CLCA, to identify the marginal technologies affected and related consequences. Significant uncertainties are involved, particularly in future-related LCAs, and these should not be ignored. Harmonization of the methods and data sets for various purposes is suggested, acknowledging that selections might be subjective.     

Comparison of flexibility options to improve the value of variable power generation

As the share of variable generation in power systems increases, there is increasing value in more flexible use and generation of electricity. The paper compares the economic value of several flexibility options in a large power system with a large amount of reservoir hydro power. Generation planning models are needed to consider the impact of flexibility options on other investments in a power system. However, generation planning models do not include all the relevant operational details. The approach in the paper combines a generation planning model with a unit commitment and dispatch model. The results demonstrate the value of coupling the heat and power sectors and the value of transmission. Low-cost electricity storage does not appear to be as decisive in the Northern European context with wind power as the main variable generation source. The paper also addresses methodological issues related to the inclusion of operational constraints in generation planning.     

Effect of Long-Term Forest Fertilization on Scots Pine Xylem Quality and Wood Borer Performance

We tested whether changes in long-term nutrient availability would affect the xylem quality and characteristics of Scots pine trees as a food source for the larvae of the xylophagous wood borer Hylotrupes bajulus L. (Cerambycidae). We looked for an effect of host plant growth and xylem structural traits on H. bajulus larval performance, and looked for delayed effects of long-term forest fertilization on xylem chemical quality. In general, larval performance was dependent on larval developmental stage. However, the growth of larvae also varied with host plant quality (increases in the concentration of nitrogen and carbon-based secondary compounds of xylem were correlated with a decrease in the larval growth rate). The greater annual growth of trees reduced tracheid length and correlated positively with second-instar H. bajulus growth rate. This is consistent with the hypothesis that intrinsic growth patterns of host plants influence the development of the xylophagous wood borer H. bajulus.     

制浆造纸行业节能型真空系统——Ecopump节能透平机

通过与制浆造纸行业现有的液环泵和单/多级透平风机两种真空系统进行比较,介绍了芬兰Ecopump节能透平机真空系统技术及其优势所在。Ecopump节能透平机可为纸机真空系统节能30%~70%,同时具有投资回报快、安装维护快且简单等特点。     

Chemical and physical properties of short rotation tree species

The European Union’s growth strategy (Europe 2020) requires reductions in greenhouse gas (GHG) emissions and increases in both renewable energy sources and energy efficiency. Short rotation forestry (SRF) has achieved greater awareness due to these targets. Short rotations (1–12 years), rapid growth and the ability to coppice are typical for SRF. Salix, Populus, Alnus and Betula have smaller GHG emissions of biomass production than annual agricultural plant species, since management and harvesting are not needed every year. Physicochemical properties of these species must be known when their utilisation is planned and optimised. Seven tree species were studied: three willows (Salix myrsinifolia, Salix schwerinii and Klara), one aspen (Populus tremula), one alder (Alnus glutinosa) and two birches (Betula pendula and Betula pubescens). One stem wood (S) sample and one stem wood and bark (SB) sample of each tree were investigated. Furthermore, seven surface soil samples and four incineration ash samples (two S. myrsinifolia and two S. schwerinii) were also studied. Heating values, densities, ash contents as well as carbon, hydrogen and nitrogen contents of all short rotation biomass samples were usually quite typical for the corresponding tree species. Additional observations included the accumulation of cadmium in willow and aspen samples, small chloride content values, and higher ash- and element contents in SB samples than in the corresponding S samples. Nutrient content of ash was usually higher in the S sample, contradictory to biomass samples, and finally the cadmium content of the ash samples was very high.     

Wet oxidation lumped kinetic model for wastewater organic burden biodegradability prediction

In many cases, treatment of wastewaters requires a combination of processes that very often includes biological treatment. Wet oxidation (WO) in combination with biotreatment has been successfully used for the treatment of refractory wastes. Therefore, information about the biodegradability of wastewater solutes and particulates after wet oxidation is very important. The present work proposes a model that can describe the oxidation process via organic concentration characteristics such as chemical oxygen demand (COD), biochemical oxygen demand (BOD), and immediately available BOD (IA BOD) and so can allow the prediction of biodegradability (i.e., BOD/COD ratio). The reaction mechanism includes the destruction of nonbiodegradable substances bytwo pathways: oxidation to carbon dioxide and water and oxidation to larger biodegradable compounds with their further degradation to smaller ones measured via IA BOD. The destruction of small biodegradable compounds to end products is also included in the model. The experiments were performed at different temperatures (170-200 degrees C) and partial oxygen pressures (0.5-1.5 MPa) in a batch stainless steel high-pressure autoclave. The model of concentrated thermomechanical pulp circulation water was selected for the experiments. The proposed model correlates with the experimental data well and it is compared with other WO models in the literature.