Flash Sintering of Nanocrystalline Zinc Oxide and its Influence on Microstructure and Defect Formation

We report the sintering behavior of nanocrystalline zinc oxide under external AC electric field between 0 and 160 V/cm. In situ acquisition of density by means of laser dilatometry, evaluation of specimen temperature, real‐time measurement of electric field and current help analyze this peculiar behavior. Field strength and blocking electrodes significantly affect densification and microstructure, which was evaluated in the vicinity of the flash event and for the fully sintered material. High current densities flow through the sample at high electric fields, entailing a sudden increment of the temperature estimated to several hundreds of K and an exaggerated grain growth. In contrast, low current density flows through the sample at lower electric fields, which guarantees normal grain growth and highest final density. Macroscopic photoluminescence measurements give insights into the development of the defect structure. Electric fields are expected to enhance defect mobility, explaining the high densification rates observed during the sintering process.     

Coarse-Grained and Atomistic MD Simulations of RNA and DNA Folding

Although the main features of the protein folding problem are coming into clearer focus, the microscopic viewpoint of nucleic acid folding mechanisms is only just beginning to be addressed. Experiments, theory, and simulations are pointing to complex thermodynamic and kinetic mechanisms. As is the case for proteins, molecular dynamics (MD) simulations continue to be indispensable tools for providing a molecular basis for nucleic acid folding mechanisms. In this review, we provide an overview of biomolecular folding mechanisms focusing on nucleic acids. We outline the important interactions that are likely to be the main determinants of nucleic acid folding energy landscapes. We discuss recent MD simulation studies of empirical force field and Go-type MD simulations of RNA and DNA folding mechanisms to outline recent successes and the theoretical and computational challenges that lie ahead.     

Association Colloids Formed by Multiple Surface Active Minor Components and Their Effect on Lipid Oxidation in Bulk Oil

Association colloids formed by surface active minor components play an important role in the oxidative stability of bulk oils. To imitate the formation of nanostructures in refined oils, multiple surface active minor components including phospholipids, free fatty acids, diacylglycerols and sterols were added to stripped corn oil. The critical micelle concentration (CMC) of the mixed components was determined. The impact of mixed minor components at below and above their CMC on oxidative stability of bulk oil and on antioxidant activity of α-tocopherol and Trolox was investigated. The CMC of the mixed surface active components in bulk oil was 20 µmol/kg oil in the presence of 383 ± 2 ppm of water. 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) played an important role on the formation of association colloids since it was the most important component in forming the association colloids as confirmed by CMC and fluorescence probe studies. The association colloids formed by the mixed components showed prooxidative activity in bulk oil as determined by monitoring the formation of lipid hydroperoxide and hexanal. The activity of α-tocopherol or Trolox was not changed by mixed components association colloids. These results suggest that association colloids both physically and chemically impacted the oxidative stability and activity of antioxidants in bulk oil.     

Impact of Phosphoethanolamine Reverse Micelles on Lipid Oxidation in Bulk Oils

Phospholipids are important minor components in edible oil that play a role in lipid oxidation. Surface active phospholipids have an intermediate hydrophilic–lipophilic balance value, which allows them to form association colloids such as reverse micelles in bulk oil. These association colloids can influence lipid oxidation since they create lipid–water interfaces where prooxidants and antioxidants can interact with triacylglycerols. In this study, we examined the formation of reverse micelles in a stripped oil system by dioleoyl phosphoethanolamine (DOPE) and the effect of these physical structures on lipid oxidation kinetics. The critical micelle concentration (CMC) of DOPE was approximately 200 µmol/kg oil at 45 °C. Oxidation kinetics studies showed that DOPE was prooxidative when it was above its CMC (400 and 1,000 µM), reducing the lag phase from 14 days (control) to 8 days. The addition of combinations of DOPE and dioleoyl phosphocholine (DOPC) resulted in formation of mixed micelles with a CMC of 80 µmol/kg oil at 45 °C. These mixed micelles were also prooxidative when concentrations (100 and 500 µM) were above the CMC, decreasing the lag phase from 14 to 8 days. These findings provide a better understanding of the role of phospholipids in lipid oxidation of edible oil and could contribute to better antioxidant solutions.     

Finite element modeling of resistive surface layers by micro-contact impedance spectroscopy

Micro-contact impedance spectroscopy (MCIS) is potentially a powerful tool for the exploration of resistive surface layers on top of a conductive bulk or substrate material. MCIS employs micro-contacts in contrast to conventional IS where macroscopic electrodes are used. To extract the conductivity of each region accurately using MCIS requires the data to be corrected for geometry. Using finite element modeling on a system where the resistivity of the surface layer is at least a factor of ten greater than the bulk/substrate, we show how current flows through the two layers using two typical micro-contact configurations. This allows us to establish if and what is the most accurate and reliable method for extracting conductivity values for both regions. For a top circular micro-contact and a full bottom counter electrode, the surface layer conductivity (σ_s) can be accurately extracted using a spreading resistance equation if the thickness is ~10 times the micro-contact radius; however, bulk conductivity (σ_b) values can not be accurately determined. If the contact radius is 10 times the thickness of the resistive surface, a geometrical factor using the micro-contact area provides accurate σ_s values. In this case, a spreading resistance equation also provides a good approximation for σ_b. For two top circular micro-contacts on thin resistive surface layers, the MCIS response from the surface layer is independent of the contact separation; however, the bulk response is dependent on the contact separation and at small separations contact interference occurs. As a consequence, there is not a single ideal experimental setup that works; to obtain accurate σ_s and σ_b values the micro-contact radius, surface layer thickness and the contact separation must all be considered together. Here we provide scenarios where accurate σ_s and σ_b values can be obtained that highlight the importance of experimental design and where appropriate equations can be employed for thin and thick resistive surface layers.     

Manufacture and measurement of combinatorial libraries of dielectric ceramics: Part II. Dielectric measurements of Ba1−xSrxTiO3 libraries

Applying combinatorial methods to materials science offers the opportunity to accelerate the discovery of more efficient dielectric ceramics. High-throughput methods have the potential to investigate the effects of a wide range of dopants on the dielectric properties, and to optimise existing systems, encouraging the short innovation cycles that the communications technology industry requires. The London University Search Instrument (LUSI) is a fully automated, high-throughput combinatorial robot that has the potential capability to produce large numbers of sintered bulk ceramic samples with varying composition in 1 day, as combinatorial libraries on alumina substrates. Ba_1−xSr_xTiO₃ (BST) libraries were produced by LUSI as a proof-of-principle, with x = 0–1 in steps of 0.1, and fired to 1350 and 1400 °C for 1 h. Part I of this paper described the manufacture and physical characterisation of BST libraries, showing a regular change in composition with x across the libraries. In this second part, the dielectric properties of BST libraries produced by LUSI are assessed at frequencies between 100 Hz and 1 MHz, and at temperatures between 150 and 500 K. Local piezoelectric properties were also characterised by scanning probe microscope (SPM). All measurements showed evidence of a clear functional gradient varying with x across the library, with measured _r corresponding to expected values for BST.     

Designed amyloid beta peptide fibril - a tool for high-throughput screening of fibril inhibitors

Amyloid beta peptide (Abeta) fibril formation is widely believed to be the causative event of Alzheimer's disease pathogenesis. Therapeutic approaches are therefore in development that target various sites in the production and aggregation of Abeta. Herein we present a high-throughput screening tool to generate novel hit compounds that block Abeta fibril formation. This tool is an application for our fibril model (Abeta(16-37)Y(20)K(22)K(24))(4), which is a covalent assembly of four Abeta fragments. With this tool, screening studies are complete within one hour, as opposed to days with native Abeta(1-40). A Z' factor of 0.84+/-0.03 was determined for fibril formation and inhibition, followed by the reporter molecule thioflavin T. Herein we also describe the analysis of a broad range of reported inhibitors and non-inhibitors of Abeta fibril formation to test the validity of the system.     

Flexible asymmetric spinning

Metal spinning is used to form shell components, but is constrained by two features: it can only produce axisymmetric shapes; it requires a dedicated mandrel for each product. Examination of pressures between product and mandrel revealed that contact is limited to three well defined areas. This suggested that the full mandrel could be replaced by three rollers. Furthermore, if these rollers could be controlled, they could represent any symmetric or asymmetric mandrel. A seven-axis machine has been designed, manufactured, and used to spin trial parts. The machine design is described, and preliminary results give an indicator of process capability.     

Prevention of liquid metal embrittlement cracks in resistance spot welds by adaption of electrode geometry

ABSTRACT

Advanced high strength steels are usually coated by a zinc layer for an increased resistance against corrosion. During the resistance spot welding of zinc coated steel grades, liquid metal embrittlement (LME) may occur. As a result, cracking inside and around the spot weld indentation is observable. The extent of LME cracks is influenced by a variety of different factors. In this study, the impact of the used electrode geometry is investigated over a stepwise varied weld time. A spot welding finite element simulation is used to analyse and explain the observed effects. Results show significant differences especially for highly increased weld times. Based on identical overall dimensions, electrode geometries with a larger working plane allow for longer weld times, while still preventing LME within the investigated material and maintaining accessibility.