Flash Sintering of Nanocrystalline Zinc Oxide and its Influence on Microstructure and Defect Formation

We report the sintering behavior of nanocrystalline zinc oxide under external AC electric field between 0 and 160 V/cm. In situ acquisition of density by means of laser dilatometry, evaluation of specimen temperature, real‐time measurement of electric field and current help analyze this peculiar behavior. Field strength and blocking electrodes significantly affect densification and microstructure, which was evaluated in the vicinity of the flash event and for the fully sintered material. High current densities flow through the sample at high electric fields, entailing a sudden increment of the temperature estimated to several hundreds of K and an exaggerated grain growth. In contrast, low current density flows through the sample at lower electric fields, which guarantees normal grain growth and highest final density. Macroscopic photoluminescence measurements give insights into the development of the defect structure. Electric fields are expected to enhance defect mobility, explaining the high densification rates observed during the sintering process.     

Coarse-Grained and Atomistic MD Simulations of RNA and DNA Folding

Although the main features of the protein folding problem are coming into clearer focus, the microscopic viewpoint of nucleic acid folding mechanisms is only just beginning to be addressed. Experiments, theory, and simulations are pointing to complex thermodynamic and kinetic mechanisms. As is the case for proteins, molecular dynamics (MD) simulations continue to be indispensable tools for providing a molecular basis for nucleic acid folding mechanisms. In this review, we provide an overview of biomolecular folding mechanisms focusing on nucleic acids. We outline the important interactions that are likely to be the main determinants of nucleic acid folding energy landscapes. We discuss recent MD simulation studies of empirical force field and Go-type MD simulations of RNA and DNA folding mechanisms to outline recent successes and the theoretical and computational challenges that lie ahead.     

Carbon fibers derived from UV‐assisted stabilization of wet‐spun polyacrylonitrile fibers

A rapid, dual‐stabilization route for the production of carbon fibers from polyacrylonitrile (PAN) precursor fibers is reported. A photoinitiator, 4,4′‐bis(diethylamino)benzophenone, was added to PAN solution before the fiber wet‐spinning step. After a short UV treatment that induced cyclization and crosslinking at a lower temperature, precursor fibers could be rapidly thermo‐oxidatively stabilized and successfully carbonized. Scanning electron microscopy micrographs show no deterioration of the microstructure or hollow‐core formation in the fibers due to UV treatment or presence of photoinitiator. Fast‐thermally stabilized pure PAN‐based carbon fibers show hollow‐core fiber defects due to inadequate thermal stabilization, but such defects were not observed in carbon fibers derived from fast‐thermally stabilized fibers that contained photoinitiator and were UV treated. Tensile testing results confirm that fibers containing 1 wt % photoinitiator and UV treated for 5 min display higher tensile modulus than all other sets of thermally stabilized and carbonized fibers. Wide‐angle X‐ray diffraction results show a higher development of the aromatic structure and molecular orientation in thermally stabilized fibers. No significant increase in interplanar spacing or decrease in crystals size were observed within the UV‐stabilized carbon fibers containing photoinitiator, but such fibers retain a higher extent of molecular orientation when compared with control fibers. These results establish for the first time, the positive effect of the external addition of photoinitiator and UV treatment on the properties of the PAN‐based fibers, and may be used to reduce the precursor stabilization time for faster carbon fiber production rate. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40623.     

Association Colloids Formed by Multiple Surface Active Minor Components and Their Effect on Lipid Oxidation in Bulk Oil

Association colloids formed by surface active minor components play an important role in the oxidative stability of bulk oils. To imitate the formation of nanostructures in refined oils, multiple surface active minor components including phospholipids, free fatty acids, diacylglycerols and sterols were added to stripped corn oil. The critical micelle concentration (CMC) of the mixed components was determined. The impact of mixed minor components at below and above their CMC on oxidative stability of bulk oil and on antioxidant activity of α-tocopherol and Trolox was investigated. The CMC of the mixed surface active components in bulk oil was 20 µmol/kg oil in the presence of 383 ± 2 ppm of water. 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) played an important role on the formation of association colloids since it was the most important component in forming the association colloids as confirmed by CMC and fluorescence probe studies. The association colloids formed by the mixed components showed prooxidative activity in bulk oil as determined by monitoring the formation of lipid hydroperoxide and hexanal. The activity of α-tocopherol or Trolox was not changed by mixed components association colloids. These results suggest that association colloids both physically and chemically impacted the oxidative stability and activity of antioxidants in bulk oil.     

Impact of Phosphoethanolamine Reverse Micelles on Lipid Oxidation in Bulk Oils

Phospholipids are important minor components in edible oil that play a role in lipid oxidation. Surface active phospholipids have an intermediate hydrophilic–lipophilic balance value, which allows them to form association colloids such as reverse micelles in bulk oil. These association colloids can influence lipid oxidation since they create lipid–water interfaces where prooxidants and antioxidants can interact with triacylglycerols. In this study, we examined the formation of reverse micelles in a stripped oil system by dioleoyl phosphoethanolamine (DOPE) and the effect of these physical structures on lipid oxidation kinetics. The critical micelle concentration (CMC) of DOPE was approximately 200 µmol/kg oil at 45 °C. Oxidation kinetics studies showed that DOPE was prooxidative when it was above its CMC (400 and 1,000 µM), reducing the lag phase from 14 days (control) to 8 days. The addition of combinations of DOPE and dioleoyl phosphocholine (DOPC) resulted in formation of mixed micelles with a CMC of 80 µmol/kg oil at 45 °C. These mixed micelles were also prooxidative when concentrations (100 and 500 µM) were above the CMC, decreasing the lag phase from 14 to 8 days. These findings provide a better understanding of the role of phospholipids in lipid oxidation of edible oil and could contribute to better antioxidant solutions.     

Biological Implications of a Stroke Therapy Based in Neuroglobin Hyaluronate Nanoparticles. Neuroprotective Role and Molecular Bases

Exogenous neuroprotective protein neuroglobin (Ngb) cannot cross the blood–brain barrier. To overcome this difficulty, we synthesized hyaluronate nanoparticles (NPs), able to deliver Ngb into the brain in an animal model of stroke (MCAO). These NPs effectively reached neurons, and were microscopically identified after 24 h of reperfusion. Compared to MCAO non-treated animals, those treated with Ngb-NPs showed survival rates up to 50% higher, and better neurological scores. Tissue damage improved with the treatment, but no changes in the infarct volume or in the oxidative/nitrosative values were detected. A proteomics approach (p-value < 0.02; fold change = 0.05) in the infarcted areas showed a total of 219 proteins that significantly changed their expression after stroke and treatment with Ngb-NPs. Of special interest, are proteins such as FBXO7 and NTRK2, which were downexpressed in stroke, but overexpressed after treatment with Ngb-NPs; and ATX2L, which was overexpressed only under the effect of Ngb. Interestingly, the proteins affected by the treatment with Ngb were involved in mitochondrial function and cell death, endocytosis, protein metabolism, cytoskeletal remodeling, or synaptic function, and in regenerative processes, such as dendritogenesis, neuritogenesis, or sinaptogenesis. Consequently, our pharmaceutical preparation may open new therapeutic scopes for stroke and possibly for other neurodegenerative pathologies.     

Finite element modeling of resistive surface layers by micro-contact impedance spectroscopy

Micro-contact impedance spectroscopy (MCIS) is potentially a powerful tool for the exploration of resistive surface layers on top of a conductive bulk or substrate material. MCIS employs micro-contacts in contrast to conventional IS where macroscopic electrodes are used. To extract the conductivity of each region accurately using MCIS requires the data to be corrected for geometry. Using finite element modeling on a system where the resistivity of the surface layer is at least a factor of ten greater than the bulk/substrate, we show how current flows through the two layers using two typical micro-contact configurations. This allows us to establish if and what is the most accurate and reliable method for extracting conductivity values for both regions. For a top circular micro-contact and a full bottom counter electrode, the surface layer conductivity (σ_s) can be accurately extracted using a spreading resistance equation if the thickness is ~10 times the micro-contact radius; however, bulk conductivity (σ_b) values can not be accurately determined. If the contact radius is 10 times the thickness of the resistive surface, a geometrical factor using the micro-contact area provides accurate σ_s values. In this case, a spreading resistance equation also provides a good approximation for σ_b. For two top circular micro-contacts on thin resistive surface layers, the MCIS response from the surface layer is independent of the contact separation; however, the bulk response is dependent on the contact separation and at small separations contact interference occurs. As a consequence, there is not a single ideal experimental setup that works; to obtain accurate σ_s and σ_b values the micro-contact radius, surface layer thickness and the contact separation must all be considered together. Here we provide scenarios where accurate σ_s and σ_b values can be obtained that highlight the importance of experimental design and where appropriate equations can be employed for thin and thick resistive surface layers.     

Identification of a new oxidation/ dissolution mechanism for boria-accelerated SiC oxidation

Boria effects on accelerated SiC oxidation kinetics were investigated by conducting thermogravimetric analysis on SiC substrates coated with sol-gel derived borosilicate glass isothermally exposed to dry O₂ and argon at 800°C and 1200°C for 100 hours. Boria concentrations in the glass coatings were 0, 14-38, and 92-94 mol%, balance silica. Accelerated weight gain was observed for SiC exposures in dry O₂ at 800°C when boria concentrations were ≥ 92 mol%, corroborated by oxide thickness ranging from 3.5 to 10 µm. The oxide thickness predicted for pure SiC exposed to these conditions in the absence of boria is 0.15 µm. Microstructural analysis of SiC surfaces after oxide removal revealed that boria etched the underlying SiC substrate. Oxidation exposures at 1200°C in dry O₂ suppressed boria effects on accelerating SiC oxidation kinetics due to rapid boria volatilization coupled with the formation of a protective thermally grown silica scale. Accelerated weight gain or oxide growth did not occur with argon exposures at either temperature. A new mechanism for boria-accelerated SiC surface-reaction kinetics is presented based on evidence for boria etching of SiC.     

Synthesis,Pharmacological Evaluation,and Docking Studies of Novel Pyridazinone‐Based Cannabinoid Receptor Type 2 Ligands

In recent years, cannabinoid type 2 receptors (CB₂R) have emerged as promising therapeutic targets in a wide variety of diseases. Selective ligands of CB₂R are devoid of the psychoactive effects typically observed for CB₁R ligands. Based on our recent studies on a class of pyridazinone 4‐carboxamides, further structural modifications of the pyridazinone core were made to better investigate the structure–activity relationships for this promising scaffold with the aim to develop potent CB₂R ligands. In binding assays, two of the new synthesized compounds [6‐(3,4‐dichlorophenyl)‐2‐(4‐fluorobenzyl)‐cis‐N‐(4‐methylcyclohexyl)‐3‐oxo‐2,3‐dihydropyridazine‐4‐carboxamide ( 2 ) and 6‐(4‐chloro‐3‐methylphenyl)‐cis‐N‐(4‐methylcyclohexyl)‐3‐oxo‐2‐pentyl‐2,3‐dihydropyridazine‐4‐carboxamide ( 22 )] showed high CB₂R affinity, with K_i values of 2.1 and 1.6 nm , respectively. In addition, functional assays of these compounds and other new active related derivatives revealed their pharmacological profiles as CB₂R inverse agonists. Compound 22 displayed the highest CB₂R selectivity and potency, presenting a favorable in silico pharmacokinetic profile. Furthermore, a molecular modeling study revealed how 22 produces inverse agonism through blocking the movement of the toggle‐switch residue, W6.48.     

Manufacture and measurement of combinatorial libraries of dielectric ceramics: Part II. Dielectric measurements of Ba1−xSrxTiO3 libraries

Applying combinatorial methods to materials science offers the opportunity to accelerate the discovery of more efficient dielectric ceramics. High-throughput methods have the potential to investigate the effects of a wide range of dopants on the dielectric properties, and to optimise existing systems, encouraging the short innovation cycles that the communications technology industry requires. The London University Search Instrument (LUSI) is a fully automated, high-throughput combinatorial robot that has the potential capability to produce large numbers of sintered bulk ceramic samples with varying composition in 1 day, as combinatorial libraries on alumina substrates. Ba_1−xSr_xTiO₃ (BST) libraries were produced by LUSI as a proof-of-principle, with x = 0–1 in steps of 0.1, and fired to 1350 and 1400 °C for 1 h. Part I of this paper described the manufacture and physical characterisation of BST libraries, showing a regular change in composition with x across the libraries. In this second part, the dielectric properties of BST libraries produced by LUSI are assessed at frequencies between 100 Hz and 1 MHz, and at temperatures between 150 and 500 K. Local piezoelectric properties were also characterised by scanning probe microscope (SPM). All measurements showed evidence of a clear functional gradient varying with x across the library, with measured _r corresponding to expected values for BST.