Contribution to DEMO reactor RH maintenance assessment

The scope of this paper is a preliminary assessment of the maintenance scheme in support of the European study for the next generation of fusion reactor: DEMO. Despite other fusion machine requiring remote handling maintenance operations, DEMO is supposed to work under steady state operational conditions. Therefore, requirement on the maintenance scheme is stronger. To target a good availability of the machine along machine operation plan, it is necessary to draw an adequate maintenance scheme. Indeed, due to the high fluxes generated by the plasma in the vacuum vessel, the first wall lifetime is limited, so the frequent replacement is necessary. On current fusion experimental machine, as first wall load conditions are less severe, DEMO condition implies high level of requirement on maintenance time. During DEMO lifetime, several full first wall replacements are expected. To provide access to the vacuum vessel machine for first wall removal, preparatory work is required to set the machine to adequate maintenance conditions and to open the machine properly, the same situation at the end of the maintenance period. Shutdown duration for first wall replacement should be as short as possible to reach the availability target of the machine. From this statement, the maintenance duration should not exceed 20% of the total lifetime of the reactor operation. First wall segmentation (i.e. total number of component to replace) has a high impact onto the replacement time. Considering the number of feasible designs for the first wall segmentation, we concentrate remote handling concept assessments one type of segmentation, the one minimizing the numbers of modules to replace [4], [5], [6]. Assumption on Divertor segmentation for these DEMO studies have similarities with Divertor ITER design; therefore ITER design output is relevant [1], [2]. We assume divertor removal performed in shadow time, while removing the other first wall modules.     

All the players in the game: driving home the global commitment for legitimate drugs

Substandard, falsified, and counterfeit medications are a concern for the industry and for the public’s health. Data collection and research on these illegitimate drugs must continue to be a priority and common recommendations must be implemented immediately. The health of the public continues to be at risk, and as such global consensus and collaboration must be swift. Process improvements and policy decisions can support expert recommendations while technology and research continue to drive home change. Addressing counterfeit and substandard drugs is cost effective, feasible, and the right thing to do.     

The effects of run‐of‐river dam spill on Columbia River microplankton

Dams, increasingly common in riverine systems worldwide, are particularly prevalent on the Columbia River (CR) in the United States. Hydroelectric projects, including both storage and run‐of‐river (i.e., minimal storage) structures, on the mainstem CR highly manage water flow, often by releasing water over (rather than through) dams as “spill.” To test the effects of run‐of‐river dam spill on microplankton abundance and composition, we sampled above and below two dams in the lower CR before and during spill conditions in spring 2016 and during and after spill conditions in late summer 2007. We tested the effects of location (i.e., above vs. below dams), spill condition (i.e., before, during, and after spill), and their interaction on microplankton abundance. Generally, diatoms were most abundant during springtime, whereas cyanobacteria were most abundant in late summer. Most taxa were not significantly different in abundance above and below dams, regardless of spill status; although cyanobacteria abundance was marginally higher below dams in summer 2007 (p = .04). Abundances of all taxa were significantly different between pre‐spill and spill periods in spring 2016, whereas only diatom and flagellate abundances were significantly different between spill and post‐spill periods in summer 2007. We conclude that spill conditions may influence microplankton abundance, but are not likely to affect microplankton communities on either side of run‐of‐river dams on the CR. This is important information for dam managers concerned about ecosystem impacts of spill.     

NanoPaint: A Tool for Rapid and Dynamic Imaging of Membrane Structural Plasticity at the Nanoscale

Single‐particle tracking with quantum dots (QDs) constitutes a powerful tool to track the nanoscopic dynamics of individual cell membrane components unveiling their membrane diffusion characteristics. Here, the nano‐resolved population dynamics of QDs is exploited to reconstruct the topography and structural changes of the cell membrane surface with high temporal and spatial resolution. For this proof‐of‐concept study, bright, small, and stable biofunctional QD nanoconstructs are utilized recognizing the endogenous neuronal cannabinoid receptor 1, a highly expressed and fast‐diffusing membrane protein, together with a commercial point‐localization microscope. Rapid QD diffusion on the axonal plasma membrane of cultured hippocampal neurons allows precise reconstruction of the membrane surface in less than 1 min with a spatial resolution of tens of nanometers. Access of the QD nanoconstructs to the synaptic cleft enables rapid 3D topological reconstruction of the entire presynaptic component. Successful reconstruction of membrane nano‐topology and deformation at the second time‐scale is also demonstrated for HEK293 cell filopodia and axons. Named “nanoPaint,” this super‐resolution imaging technique amenable to any endogenous transmembrane target represents a versatile platform to rapidly and accurately reconstruct the cell membrane nano‐topography, thereby enabling the study of the rapid dynamic phenomena involved in neuronal membrane plasticity.     

Dark-capacitance transients in MIS tunnel diodes

Dark-capacitance transients in MIS tunnel diodes switched from accumulation to deep depletion depend on the interface state occupancy. This time dependent function is derived and its behavior described for electron emission and electron-hole pair generation with tunneling and thermally controlled occupancies. A new method of determining the tunneling relaxation time constant τ_T from the electron emission transient at low temperature is described. Measurements of MIS tunnel diodes with oxide thickness d_ox = 17 to 80 Å agree with theory and the resultant values of τ_T compare with previously reported results from photocapacitance[2].     

Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: Cryomilling and spark plasma sintering

Dense, bulk nanocrystalline aluminum 5083 alloy was fabricatedvia a combined technique: cryomilling (mechanical milling at cryogenic temperature) to achieve the nanocrystalline Al 5083 powder and spark plasma sintering (SPS) to consolidate the cryomilled powder. The results of X-ray diffraction analysis indicate that the average grain size in the SPS consolidated material is 51 nm, one of the smallest grain sizes ever reported in bulk Al alloys produced by powder metallurgy derived methods. In contrast, transmission electron microscopy (TEM) analysis revealed a bimodal grain size distribution, with an average grain size of 47 nm in the fine-grained regions and approximately 300 nm in the coarse-grained regions. Nanoindentation was used to evaluate the mechanical properties and the uniformity of the consolidated nanocrystalline Al 5083. The hardness of the material is greatly improved over that of the conventional equivalent, due to the fine grain size. The mechanisms for spark plasma sintering and the microstructural evolution are discussed on the basis of the experimental findings.     

Characterisation and behaviour of Ti/TiO2/noble metal anodes

The morphology, composition and the electrical and electrochemical behaviour of the anodic microporous layer, prepared by the galvanostatic anodisation of Ti after sparking, followed by galvanostatic deposition of Pt or Ir have been investigated. These electrodes are proposed to function as dimensionally stable anodes (DSAs). For Ti/TiO₂/Pt electrodes, Pt is deposited within some of the micropores of the oxide film. In contrast, for Ti/TiO₂/Ir, the metal is deposited preferentially on the top surface. This difference is thought to result from the position of the metal deposition potential with respect to the flat band potential of n-TiO₂. Optical imaging of both types of DSA suggests that only a few sites on the surface are responsible for electron exchange at the DSA-electrolyte interface. C-AFM measurements of Ti/TiO₂/Pt samples subjected to long-term anodic polarisation, suggest that the Ti-noble metal contact is progressively insulated by thickening of the TiO₂ barrier layer, promoting passivation of the DSA. For Ir coated anodes, catalytic activity is directly related to the presence of Ir and to the stability of the catalytic oxide layer. Under Cu electrowinning conditions, the electrochemically formed hydrated Ir oxide was found to be catalytically less stable, than the iridium oxide film subjected to a heat treatment.     

Mechanical properties of a cryogenically mechanically alloyed polycarbonate–poly(aryl ether ether ketone) system

The processing–property relationship of a model cryogenically mechanically alloyed polymer–polymer system [polycarbonate (PC) and poly(aryl ether ether ketone) (PEEK)] was investigated. PC and PEEK powders were cryogenically mechanically alloyed for 10 h, and the resulting two‐phase powder particles were processed into testable coupons with a miniature ram‐injection molder. The bulk mechanical properties of the coupons made from the mechanically alloyed powders and nonmechanically alloyed powders were investigated as a function of mechanical alloying and injection‐molding parameters. The injection‐molded coupons were mechanically tested in the three‐point‐bending mode. The results demonstrated that no measurable improvement was achieved in the energy to break, strain at failure, or failure strength in the coupons made from the mechanically alloyed materials in comparison with those of the coupons made from the nonmechanically alloyed powders. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1196–1202, 2003     

Anti-biofilm Activity of Human Milk Oligosaccharides in Clinical Strains of Streptococcus agalactiae with Diverse Capsular and Sequence Types

Group B Streptococcus (GBS) is an encapsulated Gram-positive bacterial pathogen that causes severe perinatal infections. Human milk oligosaccharides (HMOs) are short-chain sugars that have recently been shown to possess antimicrobial and anti-biofilm activity against a variety of bacterial pathogens, including GBS. We have expanded these studies to demonstrate that HMOs can inhibit and dismantle biofilm in both invasive and colonizing strains of GBS. A cohort of 30 diverse strains of GBS were analyzed for susceptibility to HMO-dependent biofilm inhibition or destruction. HMOs were significantly effective at inhibiting biofilm in capsular-type- and sequence-type-specific fashion, with significant efficacy in CpsIb, CpsII, CpsIII, CpsV, and CpsVI strains as well as ST-1, ST-12, ST-19, and ST-23 strains. Interestingly, CpsIa as well as ST-7 and ST-17 were not susceptible to the anti-biofilm activity of HMOs, underscoring the strain-specific effects of these important antimicrobial molecules against the perinatal pathogen Streptococcus agalactiae.     

Effects of the amount of fillers and of the crosslink density on the mechanical behavior of carbon‐black filled styrene butadiene rubbers

Several carbon‐black filled styrene‐butadiene rubbers are subjected to monotonic uniaxial tension tests in order to investigate the effects of the amount of fillers and of the crosslink density on their mechanical properties. The Young modulus, the volume changes associated with material damage and the stretch to failure are extracted and discussed. Results compare well to the literature results when exist and quantitative analysis are proposed when possible. Results show that filled rubbers are not incompressible when submitted to uniaxial tension tests and their volume changes are strongly dependent of the amount of fillers but are unaffected by the crosslink density. The latter shows strong impact on the filled rubbers stretch to failure but more interestingly this impact is comparable to what is encountered in unfilled rubbers. The stretch to failure is improved by the addition of fillers with an optimum for material filled around 30 phr. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013