Evaluation of E2PROM data retention by field acceleration

This work presents an improved theoretical analysis of the physical mechanisms leading to charge loss from the floating gate of electrically erasable PROMs (E²PROMs). The analysis is applied to a simplified model of a FLOTOX cell in order to evaluate data retention characteristics using the applied field as an accelerating factor. A set of experimental results (obtained on virgin as well as on aged cells) is presented and degradation of data retention due to cell aging is examined.     

A new vector quantization technique for performance evaluation infrequency hopping mobile radio systems

A new technique based on vector quantization (VQ) is proposed for interfacing the link-level and the system level analysis of frequency hopping (FH) mobile systems. The method represents an original solution to overcome the problem that the time scales adopted within the two analysis levels are usually different, thus discouraging a direct link between them. The VQ technique is applied, as a test case, to the study of a typical FH-GSM mobile environment. The corresponding results show excellent correlation with those achievable by means of a much more time consuming, as well as often infeasible, direct approach     

The oxidation resistance of Nb-20Mo-15Si-5B-20Cr up to 1,300°C

Nb-20Mo-15Si-5B-20Cr alloy has been oxidized in air in a range of temperatures from 700 to 1,300°C. A 24 hour exposure to air shows a minimum in weight gain per unit area at 900 and 1,000°C. Below and above this temperature the alloy has an oxide scale composed of oxide-metal interface which has been characterized by x-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, and x-ray mapping. Formation of CrNbO₄ appears to be beneficial for the oxidation resistance while another Cr oxide, Cr₂O₃, may form mainly at temperatures below 1,000°C. SiO₂ formation has been restricted to temperatures above 1,000°C. Long term oxidation consisting of seven successive 24 hour cycles of heating shows better oxidation resistance at 1,300°C for times longer than 96 hours but below that usual lower weight gain per unit area at lower temperature has been observed.     

A Daphnia magna feeding bioassay as a cost effective and ecological relevant sublethal toxicity test for Environmental Risk Assessment of toxic effluents

Environmental Risk Assessment of chemical products and effluents within EC countries require the use of cost effective standardized toxicity tests that in most cases are restricted to acute responses to high doses. Thus, subtle ecological effects are underestimated. Here we propose a short-term one day Daphnia magna feeding inhibition test as a cost effective and ecological relevant sublethal bioassay. The sensitivity and reliability of the proposed bioassay was tested in the laboratory against standardized bacteria, algae growth, D. magna and fish acute toxicity test by using 16 chemical mixture x water type combinations that included four different water types fortified with four complex chemical mixtures. Water types included ASTM hard water and three selected effluents diluted 1/10 in water to mimic worse field situations that many overexploited arid river ecosystems suffer during summer months when effluents are discharged into them with little dilution. The results obtained denoted a greater sensitivity of the proposed feeding bioassay in 51 out of 65 tests performed with an average sensitivity 50 fold greater than that of the standardized tests. The greater differences were obtained for mixtures that included narcotic chemicals and the lowest differences for those containing pesticides. Furthermore, feeding responses to the studied contaminant mixtures behaved differently to increasing TOC content than those based on bioluminescent bacteria and algae. Increasing TOC coming from sewage treated effluents decrease toxicity to the latter bioassays but increased those of D. magna feeding bioassays. These results empathize the need to include additional bioassays to monitor more accurately and realistically the toxicity of effluents or surface waters dominated by effluent discharges, a quite common situation in America and Mediterranean arid regions.     

Analysis of Nodular Cast Iron Microstructures for Micromechanical Model Development

Abstract:  One of the main factors in determining the different grades of ductile iron is the matrix structure. In the as-cast condition, the matrix will consist of varying proportions of pearlite and ferrite, and as the amount of pearlite increases, the strength and hardness of the iron also increase. Three different nodular cast irons are here considered and their microstructure characterised in detail using metallographic methods. Then micromechanics models based on the unit cell approach and the finite element method are introduced to describe the actual constitutive response of the materials and the predicted behaviours are compared with experiments.     

Removing interference components in time–frequency representations using morphological operators

Time–frequency representations have been of great interest in the analysis and classification of non-stationary signals. The use of highly selective transformation techniques is a valuable tool for obtaining accurate information for studies of this type. The Wigner-Ville distribution has high time and frequency selectivity in addition to meeting some interesting mathematical properties. However, due to the bi-linearity of the transform, interference terms emerge when the transform is applied over multi-component signals. In this paper, we propose a technique to remove cross-components from the Wigner-Ville transform using image processing algorithms. The proposed method exploits the advantages of non-linear morphological filters, using a spectrogram to obtain an adequate marker for the morphological processing of the Wigner-Ville transform. Unlike traditional smoothing techniques, this algorithm provides cross-term attenuations while preserving time–frequency resolutions. Moreover, it could also be applied to distributions with different interference geometries. The method has been applied to a set of different time–frequency transforms, with promising results.     

Frequency dependence of amplitude scintillation

In the prediction models of tropospheric scintillation on Earth-satellite paths from Karasawa, Yamada, and Allnutt and ITU-R, the frequency dependence of scintillation is expressed as a power law with a different exponent for each model. This is verified using a collection of measurement results from different satellite links in Europe, the US, and Japan at frequencies from 4 to 50 GHz and elevation angles from 2.5 to 52°. It shows that the exponent of the power law varies widely among the results from the different sites. Possible explanations of this are: (1) the frequency dependence of scintillation due to cloudy turbulence is different from that due to clear-sky turbulence and this kind of scintillation may be present to different extents in the various databases due to climatic differences and different clear-sky selection procedures or (2) angle-of-arrival fluctuations due to turbulence have a different frequency dependence and this effect may have some impact on the measured scintillation at some of the sites     

ITALSAT propagation experiment at 18.7, 39.6 and 49.5 GHz at SpinoD'Adda: three years of CPA statistics

The ITALSAT propagation experiment, started in early 1991, allows an extensive program of measurements at 18.7, 39.6, and 49.5 GHz. This paper reports the results obtained so far from copolar signal measurements carried out at the Earth station of Spine d'Adda from 1993 to 1995. Statistics of rain and total attenuation and frequency scaling of total attenuation are presented and commented on in the light of ITU-R predictions