双核稀土配合物Gd_xSm_(1-x)(TTA)_3phen的制备及发光性能

合成了系列钆钐双核稀土有机配合物GdxSm1-x(TTA)3phen(x=0~0.9).红外光谱(IR)、X射线衍射(XRD)、热重(TG)结果推测了配合物可能的分子结构;紫外可见光谱(UV/vis)结果表明,该系列稀土有机配合物能有效的吸收紫外光,吸收峰主要来自于有机配体TTA和phen(270nm和351nm处);荧光光谱(FS)结果表明,Gd3+对于Sm3+具有荧光增效,当Gd3+的摩尔分数为0.6时,Gd0.6Sm0.4(TTA)3phen类配合物的特征荧光(562nm,596nm和643nm处)强度均达到最大.     

倾斜波束非对称SAARS微带天线设计简

A circularly polarized microstrip antenna with the tilted beam of 30° through the asymmetrical structure combing the single-arm archimedean spiral antenna with the helix antenna is constructed in order to make the beam tilted. The bandwidth, tilted beam, and radiation characteristics have been improved through the width optimization and coaxial feed line selection. This antenna can realize the directional radiation of circularly polarized microwaves in a definite frequency band and has a bandwidth of 16.7％ (for Voltage Standing Wave Ratio(VSWR)<2, Axis Ratio(AR)<3dB and the tilted beam of 30°) in the condition of the vertical aperture external excitation with a coaxial feed line. Simulated and measured results show that this antenna has a wideband, high gain, and tilted beam with circularly polarized microwaves.     

基于解析解的四阶PDE曲面裁剪方法

该文提出了一种可以广泛应用于四阶PDE曲面的裁剪方法。利用PDE的参数域内的曲线在曲面上投影,得到所求裁剪曲面的边界曲线,然后通过边界曲线的导矢与曲面在边界曲线处的法向量得到边界曲线处的跨界导矢,最后以求得的裁剪曲面的边界曲线以及裁剪曲面在边界曲线处的跨界导矢为PDE曲面的边界条件,用四阶的PDE曲面方程求得PDE裁剪曲面。     

Atmospheric CO2 retrieval with a look-up-table based method by combining near and thermal infrared spectra

In order to precisely retrieve the atmospheric CO2 , a retrieval method based on both near infrared （NIR） and thermal infrared （TIR） is established firstly. Then a look-up-table （LUT） based fast line-by-line radiative transfer model （RTM） was integrated into the retrieval procedure to accelerate radiative transfer calculations. The LUT stores gas absorption cross-sections as a function of temperature, pressure and wavenumber. It could greatly reduce calculating time in radiative transfer compared to direct line-by-line method. Then retrieval was simulated using NIR, TIR and both bands. The retrieved CO2 profiles suggest joint approach could reconstruct CO2 profile better than those using NIR or TIR alone. Joint retrieval using both bands simultaneously could provide better constrain to CO2 vertical distribution in the whole troposphere.     

碱金属在白云鄂博铁精矿还原中的催化作用研究

利用失重法对碳的气化反应、CO气体以及碳还原白云鄂博铁精矿进行了实验,使用矿相、XRD分析了还原后样品的相组成与显微结构。研究结果表明：加入催化剂后,碳的气化反应速率和铁精矿还原速率提高,且K2CO3和Na2CO3的催化效果明显优于CaCO3的催化效果。催化剂的加入有助于碳的活性提高,加速了碳的气化反应,从而促进了白云鄂博铁精矿还原反应进行。     

A novel contour design technique of super/hypersonic nozzle diverging section with sharing throat

A straightforward technique has been developed to quickly determine the wall contour of super/hypersonic nozzles working at multiply Mach number which share a common throat section.Mach number distribution along the centerline of the nozzle is specified in advance and divided into two sections,both of which are described by the b-spline function.The first section is shared by different exit Mach number nozzles.The nozzle contour is determined by the method of characteristics plus boundary layer correction.An example of this design method is employed to illustrate the technique with a computational fluid dynamics calculation.The simulation results indicate that desired Mach numbers are obtained at the nozzle exit,and the good flow quality is attained for different nozzles within δMa/Ma±0.56% in the flow core region.This technique improves the design precision of the converging-diverging nozzle,cancels waves completely,and achieves nozzles with multiple Mach number exiting which share a common throat section.     

基于GSM高速公路管理系统设计

本文所研究的高速公路管理系统是基于GSM模块的。本系统中的GSM模块是一款高性能模块,主控制芯片采用STC12C5A32S2系列单片机可以实现上位机控制GSM模块接、打电话及收发信息等功能。而且可以对收到的信息进行解析,并根据信息内容进行相关操作,从而实现远程控制。该系统可以将高速公路上的各个分站与主控制中心连接起来,便于控制中心对下辖的各管理所进行高速、有效、实时的管理。     

浅谈智能变电站关键技术及其发展制约

本文对智能变电站进行了全面的介绍,对其所采用的新技术进行纵深解析,并对比了智能变电站与常规变电站之间的差异,突出智能变电站各项技术的优越性;结合智能变电站的实际运行经验,指出了新技术所存在的欠缺或发展上的制约,并提出了今后的改进方向。     

浅层断块油藏水平井CO_2吞吐增油技术

水平井是高尚堡浅层断块油藏的主要开采方式,在水平井开发过程中易形成边底水突进、水窜、水淹,油井含水上升速度快,导致油井产能下降,严重影响油田的开发效果。针对水平井开发后期产能下降的问题,采用了CO2吞吐增油技术。其主要技术原理为:在地层温度条件下CO2能快速溶于原油中,使原油膨胀,改变原油的物性,大幅度降低原油黏度,降低油水界面张力,增加溶解气驱的能量,进而达到油井增产的目的。34井次的现场应用结果证实,水平井单井日产油量由1.72t增加到4.88t,含水率由95.00%下降到51.45%,控水增油效果显著。     

一种改进的H.264帧层码率控制算法

针对H.264码率控制算法在缓冲区控制上的不足,提出一种改进的帧层码率控制算法.对缓冲区进行监视,根据已编码帧实际缓冲与目标缓冲占用率的情况进行量化参数的调整.当实际缓冲偏离目标缓冲较大时,适当增大或者减小量化参数,使编码后实际缓冲更接近目标缓冲,防止缓冲发生上溢或下溢.仿真结果表明,对于纹理简单的序列,改进的算法在PSNR几乎不变的情况下,得到了更精确的码率控制,实际缓冲更接近目标缓冲,缓冲区占有率更稳定.