Prioritized aggregation operators of trapezoidal intuitionistic fuzzy sets and their application to multicriteria decision-making

A trapezoidal intuitionistic fuzzy set, some operational laws, score and accuracy functions for trapezoidal intuitionistic fuzzy values are presented in this paper. Then, the trapezoidal intuitionistic fuzzy prioritized weighted averaging (TIFPWA) operator and trapezoidal intuitionistic fuzzy prioritized weighted geometric (TIFPWG) operator are proposed to aggregate the trapezoidal intuitionistic fuzzy information. Furthermore, a multicriteria decision-making method based on the TIFPWA and TIFPWG operators and the score and accuracy functions of trapezoidal intuitionistic fuzzy values is established to deal with the multicriteria decision-making problem in which the criteria are in different priority level. Finally, a practical example about software selection for considering various prioritized relationships between the criteria of decision-making is given to demonstrate its practicality and effectiveness.     

醋酸生产工艺选择

介绍醋酸生产的几种工艺路线，将巴斯夫工艺、BP／孟山都工艺及UOP/千代田工艺进行比较，寻找适合我厂的醋酸生产工艺。     

Effects of poly(acrylic acid) and poly(ethylene oxide) adsorption on the stability of alumina suspension

The effect of adsorbed polymer on the stability of alumina suspension was investigated. Poly(ethylene oxide) (PEO), poly(acrylic acid) (PAA) and similar kinds of polymer salts were used as a dispersant. The amount of polymer adsorbed on alumina surface and the suspension stability was measured. The pH, molecular weight, and concentration were considered as experimental parameters. PEO shows low affinity on the alumina surface while PAA has high affinity. In the case of PAA adsorption, the surface charge change by polymer adsorption influences suspension stability strongly, but not in the case of PEO adsorption. In simultaneous adsorption of PEO and PAA, the PAA concentration was fixed and PEO concentration was varied. The stability of suspension increased with increasing PEO concentration, and this is partly due to the steric stabilization by adsorption of PAA-PEO complex or adsorption of PEO through pre-adsorbed PAA and the depletion effect of non-adsorbed polymer. Suspension adsorbing sodium salts of PAA and poly(methacrylic acid) (PMA) each showed similar stability. But, when the PEO and these kinds of salts were added together to the suspension, the one with PAA sodium salt could keep a higher stability even with lower molecular weights of PEO compared with suspension with PMA sodium salt.     

聚氨酯丙烯酸酯紫外光固化PVC涂料的研制

通过对涂料不同组分的种类及配比进行调节,制备不同配方的PVC清漆。在测试附着力、硬度、耐温、耐水性能的基础上,优化涂料配方,并配制出性能优异的PVC清漆涂料。     

Mechanical properties and thermal stability of double‐shell thermal‐energy‐storage microcapsules

Double‐shell‐structured microcapsules encapsulating phase‐change materials (micro‐PCMs) with an average diameter of 5–10 μm were successfully fabricated with a melamine–formaldehyde resin as the coating material. The mechanical properties of the obtained piled micro‐PCMs, tested under compression, were evaluated with a pressure sensor. Typical stress–strain curves showed that both the single‐shell‐ and double‐shell‐structured microcapsules had yield points and maximum point pressures. The morphological changes in the shell surface confirmed the existence of yield points by scanning electron microscopy. When the pressure was beyond the yield point, the microcapsules showed conventional plastic behavior, and the double‐shell structure was more mechanically stable than the single‐shell one. Differential scanning calorimetry analysis results revealed that the properties of the phase‐change materials experienced no variation after coating with a single‐shell‐ or double‐shell‐structured polymer. Thermogravimetric analysis showed that the double‐shell‐structured micro‐PCMs experienced a weight loss of only about 5% from 86.3 to 232°C but did so more rapidly from 232 to 416°C. Thermoregulation was determined with periodical heating and cooling tests. The data showed that the micro‐PCMs changed temperature in a narrow range of 20–25°C with a time lag of 20 min to reach the maximum or minimum temperature in comparison with a reference temperature of 18–28°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1295–1302, 2007     

异丙醇气相法合成MIBK/DIBK生产线方案的技术经济评价

介绍了异丙醇气相法联产甲基异丁基酮 /二异丁基酮的工艺流程 ,对企业上生产规模进行了经济比较分析 ,提供了理论数据 ,指明了其发展前景。     

Isothermal crystallization and spherulite structure of partially miscible polypropylene–linear low-density polyethylene blends

Polypropylene (PP) was blended with a linear low-density polyethylene (LLDPE, containing 5% hexene comonomer) over a composition range of 10–90% of PP. The crystallization and morphology of the PP–LLDPE blends were studied by differential scanning calorimetry (DSC), polarized optical microscopy with a hot stage (HSOM), and scanning electron microscopy (SEM). In particular, the isothermal crystallization of PP in molten LLDPE was investigated. It was observed that the crystallization and melting behavior of PP and LLDPE changed in the blends, indicating that there was some degree of miscibility between the PP and the LLDPE. A depression of the equilibrium melting temperature (T) of PP in the blends with no more than 15% of PP confirmed that PP was miscible with LLDPE at and below 15% of PP. In addition, a drastic decrease in T from the 25% PP blend to the 20% blend led us to conclude that the miscible behavior between PP and LLDPE became favorable at a PP concentration of 20%. The optical microscopic images showed that, in the blends with 10 and 15% of PP, the PP crystallized as open-armed diffuse spherulites, similar to those in the miscible blends. In contrast, the PP crystallized in a phase-separated matrix or droplets with more than 25% of PP, when obvious phase separation occurred. The SEM image revealed that the PP lamella was able to penetrate the PP and LLDPE phase boundary and grow in the LLDPE phase. The above results displayed that the PP dissolved in the LLDPE, and, particularly, when the PP concentration was below 20%, the dissolution was substantial. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 628–639, 2001     

纳米二氧化硅模板的制备

以微乳液法制备纳米二氧化硅（SiO2）粒子，经压制、烧结制备SiO2模板。通过红外（IR）、热分析（TGDTA）、扫描电镜（SEM）等方法对SiO2模板进行表征，结果表明所得SiO2粒度在100nm左右．烧结温度在800℃时，SiO2粒子之间将实现颈长，有利于有机／无机杂化多孔材料的制备。     

密度泛函方法的ZSM-5分子筛上苯与乙烯烷基化反应机理研究

采用密度泛函(DFT)方法对于ZSM-5分子筛上苯与乙烯的烷基化反应机理进行研究。选取了包含酸性质子的8T原子簇模型代表ZSM-5分子筛的部分结构。采用B3LYP/6-31G(d)水平从生成能与反应活化能角度对于烷基化反应发生时可能存在的2种联合机理和一种分步机理进行了计算与比较。结果表明,联合反应机理中乙烯的质子化和C-C键的形成同时发生,而分步机理开始于乙醇盐中间体的生成,随后与苯反应生成反应产物。分步机理中乙醇盐中间体生成步骤的活化能(124.55 kJ/mol)低于联合机理的反应活化能(168.98 kJ/mol和156.06 kJ/mol),而烷基化步骤的活化能(209.35 kJ/mol)高于联合机理的反应活化能,由此可以推断ZSM-5分子筛上苯与乙烯的烷基化反应时2种机理同时发生,存在竞争关系。     

PPESK／PS共混物流变性能的研究

以溶液共沉淀的方法制备了含二氮杂萘联本结构的聚芳醚砜酮（PPESK）。聚苯乙烯（PS）共混物，用毛细管流变仪测定了共混物的流为性能。结果表明，在本实验条件下，PPESK／PS共混物熔体属假塑性非牛顿汉体，其熔体粘度随PS含量的增加、温度的升高、剪切速率的增大而下降。PS的加入有利于改善PPESK的熔融加工流动性。