A systematic review of the literature on patient priorities for general practice care. Part 1: Description of the research domain

To make health care more responsive to patient needs, insight into patient priorities is needed. A systematic literature review, using electronic and manual searches, was made of studies on patient priorities with regard to primary health care. Data-extraction was performed by two researchers, followed by systematic analyses of study features. 57 studies were included. The aspects of care and methods used showed a wide variation. Aspects most often included were "informativeness", "humaneness" and "competence/accuracy". Based on an analysis of 19 studies, the following aspects were seen by patients as most important in more than 50% of the studies that included them: "humaneness", "competence/accuracy", "patients' involvement in decisions", "time for care", "other aspects of availability/accessibility", "informativeness", "exploring patients' needs", "other aspects of relation and communication" and "availability of special services".     

Control of the leakage current in SrTiO3 films by acceptor doping

Stoichiometric SrTiO3 (STO) films doped with Fe or Cr were prepared by r.f. magnetron sputtering technique. The effects of Fe or Cr doping in the SrTiO3 films were studied on the leakage current property which was discussed by defect chemistry. The experimental results can be explained by a model in which oxygen vacancies are the key defects responsible for the leakage current. Acceptor doping, with a small concentration of Fe or Cr, has led to a substantial improvement to 10–9 order in the leakage current density. Above the concentration of 0.010.02 mol% Fe2O3, Cr2O3, however, as the concentration increased, the leakage current increased. These acceptors in Ti4+ site are expected to electrically compensate for donor species such as oxygen vacancies, thereby reducing the concentration of mobile carriers that contribute to electrical conduction. Consequently, acceptor doped STO films have been shown to be superior to undoped films for applications requiring high leakage resistance, such as dynamic random access memory capacitors. © 1998 Chapman & Hall     

Transformation of a thin-walled solid model into a surface model via solid deflation

A simplified geometric model with lower dimensionality, such as a mid-surface model, is often preferred over a detailed solid model for the analysis process, if the analysis results are not seriously impacted. In order to derive a mid-surface model from a thin-walled solid model, in this paper, we propose a novel approach called the solid deflation method. In this method, a solid model is assumed to be created by using air to inflate a shell that comprises the surface of the solid model. First, the model is simplified by the removal of any detailed features whose absence would not alter its overall shape. Next, the solid model itself can be converted into a degenerate solid model with zero thickness. Finally, a surface model is generated by splitting large faces paired in the thinned solid model, selecting one face per pair for creating a sheet model, and sewing the selected faces. Using this method, a more practical and usable mid-surface model can be very efficiently generated from a solid model because it can circumvent not only the tedious trimming and extension processes of the medial axis transformation method but also the time-consuming patch joining process of the mid-surface abstraction approach.     

Betweenness parameterized above tight lower bound

We study ordinal embedding relaxations in the realm of parameterized complexity. We prove the existence of a quadratic kernel for the Betweenness problem parameterized above its tight lower bound, which is stated as follows. For a set V of variables and set C of constraints “vi is between vj and vk”, decide whether there is a bijection from V to the set {1,…,|V|} satisfying at least |C|/3+κ of the constraints in C. Our result solves an open problem attributed to Benny Chor in Niedermeier's monograph “Invitation to Fixed-Parameter Algorithms”. The betweenness problem is of interest in molecular biology. An approach developed in this paper can be used to determine parameterized complexity of a number of other optimization problems on permutations parameterized above or below tight bounds.     

Memory effects of all‐solution‐processed oxide thin‐film transistors using ZnO nanoparticles

Abstract— Non‐volatile memory effects of an all‐solution‐processed oxide thin‐film transistor (TFT) with ZnO nanoparticles (NPs) as the charge‐trapping layer are reported. The device was fabricated by using a soluble MgInZnO active channel on a ZrHfO^x gate dielectric. ZnO NPs were used as the charge‐trapping site at the gate‐insulator—channel interface, and Al was used for source and drain electrodes. Transfer characteristics of the device showed a large clockwise hysteresis, which can be used to demonstrate its memory function due to electron trapping in the ZnO NP charge‐trapping layer. This memory effect has the potential to be utilized as a memory application on displays and disposable electronics.     

Localization algorithm using a virtual label for a mobile robot in indoor and outdoor environments

Scanning laser range sensors provide range data consisting of a set of point measurements. The laser sensor URG-04LX has a distance range of approximately 0.02–4 m and a scanning angle range of 240°. Usually, such an image range is acquired from one viewpoint by “moving” the laser beam using rotating mirrors/prisms. The orientation of the laser beam can easily be measured and converted into the coordinates of the image. This article conducts localization using virtual labels with data about distances in the environment obtained from 2D distance laser sensors. This method puts virtual labels on special features and points which are along the mobile robot’s path. The current location is calculated by combining the virtual label and the range image of the laser range finder.     

A type-centric framework for specifying heterogeneous, large-scale, component-oriented, architectures

Maintaining integrity and consistency, and effecting conformance in architectures of large-scale systems require specification and enforcement of many different forms of structural constraints. While type systems have proved effective for enforcing structural constraints in programs and data structures, most architectural modeling frameworks include only weak notions of typing or rely on first order logic constraint languages that have steep learning curves associated with them and that become unwieldy when scaling to large systems.We present the Cadena Architecture Language with Meta-modeling (CALM) — that uses multi-level type systems to specify and enforce a variety of architectural constraints relevant to the development of large-scale component-based systems. Cadena is a robust and extensible tool that has been used to specify a number of industrial strength component models and applied in multiple industrial research projects on model-driven development and software product lines.     

Cognitive,social and teaching presence in a virtual world and a text chat

Using a framework of cognitive, social, and teaching presence, the nature of learning experiences in a three-dimensional virtual world environment (Second Life) and a text-chat learning environment without visuals (TeachNet) were investigated. A mixed method of code frequencies, coherence graphs, interviews, and a survey was used. The results revealed that the TeachNet debates included more cognitive presence codes that indicate higher levels of cognitive processing than in SL debates. The teams were significantly different from each other in the collaboration style for developing arguments and in the ways to use utterances associated with cognitive, social, and teaching presences, and the groups’ collaboration style became more established with more experience with the tasks. The three critical factors–tool, tasks and group cohesion–that affect cognitive, teaching, and social presence are discussed.     

Overview of the applications of thermodynamic databases to steelmaking processes

Computerized thermodynamic databases for solid and liquid steel, slags and solid oxide solutions, for large numbers of components, have been developed over the last three decades by critical evaluation/optimization of all available phase equilibrium and thermodynamic data. The databases contain model parameters specifically developed for molten slags, liquid and solid steel and solid oxide solutions. With user-friendly software, which accesses these databases, complex chemical reactions and phase equilibria occurring throughout the steelmaking process can be calculated over wide ranges of temperature, oxygen potential and pressure. In the present article, the thermodynamic models and databases for molten slag and liquid steel included in well-known thermochemical packages and their applications to complex steelmaking processes involving molten slag, steel, inclusions, refractories and gases are reviewed.     

User goals in social virtual worlds: A means-end chain approach

The purpose of this study is twofold: first, to investigate user goals in social virtual worlds; second, to introduce a methodological alternative (i.e., a means-end chain approach) for analyzing user goals in cyberspaces. The data were acquired from a web survey, and were analyzed by means-end chain analysis (MECA), which produces users’ goal structure in reference to a hierarchical system of interrelated goals (Olson & Reynolds, 1983). The results show that people come to social virtual worlds to satisfy their social and hedonic needs, and to escape from real world constraints, as do virtual community members and virtual gamers; they also pursue unique activities, such as creating virtual objects and selling them. On the other hand, by clarifying relations among users’ goals, MECA provides a richer explanation for user goals than prior research which only offers separate user goals for cyberspace users without explanation of relationship among goals.