Self‐Interference Cancellation for Shared Band Transmission in Nonlinear Satellite Communication Channels

For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self‐interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self‐interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.     

On Efficient Traffic Distribution for Disaster Area Communication Using Wireless Mesh Networks

In recent time, a great deal of research effort has been directed toward promptly facilitating post-disaster communication by using wireless mesh networks (WMNs). WMN technology has been considered to be effectively exploited for this purpose as it provides multi-hop communication through an access network comprising wireless mesh routers, which are connected to the Internet through gateways (GWs). One of the critical challenges in using WMNs for establishing disaster-recovery networks is the issue of distributing traffic among the users in a balanced manner in order to avoid congestion at the GWs. To overcome this issue, we envision a disaster zone WMN comprising a network management center. First, we thoroughly investigate the problem of traffic load balancing amongst the GWs in our considered disaster zone WMN. Then, we develop traffic load distribution techniques from two perspectives. Our proposal from the first perspective hinges upon a balanced distribution of the bandwidth to be allocated per user. On the other hand, our second perspective considers the dynamic (i.e., varying) bandwidth demands from the disaster zone users that requires a more practical and refined distribution of the available bandwidth by following an intelligent forecasting method. The effectiveness of our proposals is evaluated through computer-based simulations.     

Digital CMOS IC's in 6H-SiC operating on a 5-V power supply

A CMOS technology in 6H-SiC utilizing an implanted p-well process is developed. The p-wells are fabricated by implanting boron ions into an n-type epilayer. PMOS devices are fabricated on an n-type epilayer while the NMOS devices are fabricated on implanted p-wells using a thermally grown gate oxide. The resulting NMOS devices have a threshold voltage of 3.3 V while the PMOS devices have a threshold voltage of -4.2 V at room temperature. The effective channel mobility is around 20 cm ²/Vs for the NMOS devices and around 7.5 cm²/Vs for the PMOS devices. Several digital circuits, such as inverters, NAND's, NOR's, and 11-stage ring oscillators are fabricated using these devices and exhibited stable operation at temperatures ranging from room temperature to 300°C. These digital circuits are the first CMOS circuits in 6H-SiC to operate with a 5-V power supply for temperatures ranging from room temperature up to 300°C     

Motion based object tracking with mobile camera

An efficient algorithm which detects and tracks a moving object is proposed. The global motion energy caused by camera movement is eliminated by finding the maximal matching position with the cross-correlation value between two consecutive frames using the spiral scanning technique. The region of a moving object is segmented exactly by combining the results of the temporal derivatives and edge map from one image, and the actual centroid of the moving object is determined as the mid-point of the cumulative distribution of the projection profile of the region     

Advances in internet congestion control

In this survey, we first review the concept of congestion control with a focus on the Transmission Control Protocol⁄Internet Protocol (TCP⁄IP). We describe many recently proposed algorithms to combat congestion and improve performance, particularly active queue management (AQM) algorithms such as random early detection (RED) and its variants. We then survey control-theoretic analysis and design of TCP congestion control with an AQM scheme. In addition, we discuss three problems associated with AQM proposals: parameter setting, the insensitivity to the input traffic load variation, and the mismatch between macroscopic and microscopic behavior of queue length dynamics. As alternatives to AQM algorithms, we also survey architectural approaches such as modification of source or network algorithms, and economic approaches including pricing or optimization of allocated resources. Finally, we list many open issues that persist in the design, operation, and control of the Internet.     

Embedded microstrip interconnection lines for gigahertz digitalcircuits

Transmission line structures are needed for the high-performance interconnection lines of GHz integrated circuits (ICs) and multichip modules (MCMs), to minimize undesired electromagnetic wave phenomena and, therefore, to maximize the transmission bandwidth of the interconnection lines. In addition, correct and simple models of the interconnection lines are required for the efficient design and analysis of the circuits containing the interconnection lines. In this paper, we present electrical comparisons of three transmission line structures: conventional metal-insulator-semiconductor (MIS) and the embedded microstrip structures-embedded microstrip (EM) and inverted embedded microstrip (IEM). In addition, we propose closed-form expressions for the embedded microstrip structures EM and IEM and validate the expressions by comparing with empirical results based on S-parameter measurements and subsequent microwave network analysis. Test devices were fabricated using a 1-poly and 3-metal 0.6 μm Si process. The test devices contained the conventional MIS and the two embedded microstrip structures of different sizes. The embedded microstrip structures were shown to carry GHz digital signals with less loss and less dispersion than the conventional MIS line structures. S-parameter measurements of the test devices showed that the embedded microstrip structures could support the quasi-TEM mode propagation at frequencies above 2 GHz. On the other hand, the conventional MIS structure showed slow-wave mode propagation up to 20 GHz. More than 3-dB/mm difference of signal attenuation was observed between the embedded microstrip structures and the conventional MIS structure at 20 GHz. Finally, analytical RLCG transmission line models were developed and shown to agree well with the empirical models deduced from S-parameter measurements     

Research activities on next-generation mobile communications and services in Korea

In this article we present a perspective on next-generation mobile communications and services. As a preliminary research work on next-generation mobile communications, we exploit what next-generation mobile services will be (S. Ryu et al., May 2003). We define next-generation mobile services as a hierarchy of services consisting of three different service levels: the service areas, the service functionalities, and the service technologies. We derive these service levels by means of scenario-based analysis. Next we propose conceptual reference network architecture, focusing on the realization of the service technologies. We divide the network into four different parts: a user equipments and access part, a network service provisioning layer part, a network control layer part, and non-mobile network operator service pan, according to characteristics of information and service flows within a network. In this reference network architecture, service elements such as servers, processors, and gateways are placed in each network part to support the derived next-generation mobile services. Finally, we give a brief introduction of research and development activities for next-generation mobile communication systems and services in Korea.     

Emulsifier Effects on Pasting Properties of Wheat Flour Extrudates with/without Sucrose and Shortening

The objective of this study was to determine the effects of emulsifier types and concentrations, plus the addition of sucrose and shortening on wheat flour extrudates. Ground extrudate pasting properties were measured in the rapid viscoanalyser (RVA). Four pasting parameters were determined from the RVA curve: peak time (PT), peak viscosity (P), breakdown viscosity (H), and initial slope (IS). Emulsifier types and the addition of sucrose and shortening significantly affected PT, P, H, and IS. Emulsifier concentration significantly influenced PT and H. Emulsifiers significantly increased PT and H and decreased P and IS. Glyceryl monostearate had the greatest effects on these parameters. Sucrose and shortening generally enhanced the effects of emulsifiers on pasting properties.     

Structural and optical properties of GaxIn1−xP layers grown by chemical beam epitaxy

Chemical beam epitaxial (CBE) Ga_xIn_1?xP layers (x≈0.5) grown on (001) GaAs substrates at temperatures ranging from 490 to 580°C have been investigated using transmission electron diffraction (TED), transmission electron microscopy, and photoluminescence (PL). TED examination revealed the presence of diffuse scattering 1/2{111}_B positions, indicating the occurrence of typical CuPt-type ordering in the GaInP CBE layers. As the growth temperature decreased from 580 to 490°C, maxima in the intensity of the diffuse scattering moved from ½{111}_B to ½{?1+δ,1?δ,0} positions, where δ is a positive value. As the growth temperature increased from 490 to 550°C, the maxima in the diffuse scattering intensity progressively approached positions of $\frac{1}{2}\{\bar 110\} $ , i.e., the value of δ decreased from 0.25 to 0.17. Bandgap reduction (～45 meV) was observed in the CBE GaInP layers and was attributed to the presence of ordered structures.