Surface characterization of PET nonwoven fabric treated by He/O2 atmospheric pressure plasma

The surface of polyethyleneterephthalate (PET) nonwoven fabric was modified by He/O₂ atmospheric pressure plasma treatment, varying plasma exposure time. The plasma treated PET surfaces have been analyzed to investigate the chemical nature and morphology of surface by X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. The change of wettability was measured depending on plasma exposure time. XPS results indicated the presence of oxygen‐based functional groups on the PET nonwoven fabric surface after plasma treatment and oxygen content increased as exposure time increased. The mean roughness increased after 30 s exposure and further increase in exposure to 60 s led to decrease of the roughness and then again increase. The root mean square roughness followed the similar trend to mean roughness. The average difference in height, Rz, increased after plasma exposure for 30 s, while it slightly decreased after 60 s exposure. Despite of redeposition, the Rz of 90 s exposed sample increased more than two times compared with those of 30 and 60 s exposed. Wettability increased progressively up to 10 times after 90 s exposure compared with the untreated. It is attributed to the increases of hydrophilicity and surface roughness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure and processability of iodinated poly(vinyl alcohol). IV. Drawability of the films iodinated at solution before casting

The drawability of iodinated at solution before casting (IBC) polyvinyl alcohol films prepared by casting aqueous solutions of 10 wt % PVA containing 15.2, 39.8, 83.2, 117.0, and 140.1% was examined with a tensile tester at 20–60°C. The tensile behavior of IBC films showed that the yield and breaking loads were much lower, and the breaking elongation was even higher than those of the unoriented iodinated after casting (IAC) films as well as the untreated PVA films. The maximum draw ratios of the films with the weight gain of 15.2, 39.8, 83.2, 117, and 140.1% were 4.5, 5.5, 8.5, 8.0, and 7.5, respectively, which were achieved at 20°C in all. The crystallinity of all films increased by the maximum draw, regardless of crystallinity before drawing. The crystalline structure was recovered to the original PVA crystalline lattice by deiodination. Amorphous orientation and initial moduli increased with the maximum draw ratio, while the orientation of crystals was constant. The orientation and moduli increased up to the weight gain of 83.2%, whose highest draw ratio and initial modulus were 8.5 and of 7.1 GPa, respectively, and then decreased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

安积伸：从设计“协奏”到设计“独奏”

从安积伸（Shin Azumi）第一次到英国算起，他和英国、和伦敦已经有了近15年的情结。安积伸早已成了各类媒体报道和机构介绍里频繁出现的名字，就连英国设计节的创始人之一约翰·索瑞（John Sorrell）在《Creative Island（创意之岛）》一书中也将其作为对英国创意产业有所影响的驻岛设计师予以了收录。安积伸目前依然在伦敦经营着自己“astudio”．一个从事产品、家具和空间设计的工作室。[第一段]     

Manufacturing and structural safety evaluation of a composite train carbody

This paper explains the manufacturing process of a composite train carbody with a sandwich composite structure for bodyshell and a stainless steel structure for the under frame. In addition, the structural behavior and safety of the composite carbody of the Korean tilting train was investigated by the static load tests. From the test results, the stiffness of the composite carbody met the specified design. In the aspect of strength, the maximum stress of the composite bodyshell was of 12.2% of strength of CF1263 carbon/epoxy.     

Virtual Fiber Configuration for Dynamic Lightpath Establishment in Large-scaled Optical Networks

Recently, progress has been made in the Generalized Multi-Protocol Label Switching (GMPLS) and Automatic Switched Optical Networks (ASON) standardizations. These technologies realize construction of large-scaled optical networks, interconnections among single-domain Wavelength Division Multiplexing (WDM) networks, and direct communication over multi-domain WDM networks. Meanwhile, it is known that the topology of the Internet exhibits the power-law attribute. Since the topology of the Internet, which is constructed by interconnecting ASs, exhibits the power-law, there is a possibility that large-scale WDM networks, which are constructed by interconnecting WDM networks, will also exhibit the power-law attribute. One of the structural properties of a topology that adheres to the power-law is that most nodes have just a few links, although some have a tremendous number of them. Another property is that the average distance between nodes is smaller than in a mesh-like network. A natural question is how such a structural property performs in WDM networks. In this paper, we first investigate the property of the power-law attribute of physical topologies for WDM networks. We compare the performance of WDM networks with mesh-like and power-law topologies, and show that links connected to high-degree nodes are bottlenecks in power-law topologies. To relax this, we introduce a concept of virtual fiber, which consists of two or more fibers, and propose its configuration method to utilize wavelength resources more effectively. We compare performances of power-law networks with and without our method by computer simulations. The results show that our method reduces the blocking probabilities by more than one order of magnitude.     

An interactive multiple-response simulation optimization method

This study proposes a new interactive multicriteria method for determining the best levels of the decision variables needed to optimize a stochastic computer simulation with multiple response variables. The method, called the Pairwise Comparison Stochastic Cutting Plane (PCSCP) method, combines good features from interactive multiple objective mathematical programming and response surface methodology. The major characteristics of the PCSCP method are: (1) it interacts progressively with the decision-maker (DM) to obtain her preferences, (2) it uses experimental design to explore the decision space adequately while reducing the burden on the DM, and (3) it uses the preference information provided by the DM and the sampling error in the responses to reduce the decision space. The mechanics of the method are illustrated with a numerical example. Some computational studies evaluating the method are also reported.     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

An empirical investigation of socio-cultural factors of information sharing in China

Understanding information sharing is an important challenge to modern organizations, and is likely to be increasingly considered when IT investment decisions are made world-wide. Our research study investigated the influence of cultural factors on information sharing in China. It was postulated that social network structures such as guanxi, Confucian dynamism, and collectivism could explain the degree to which information sharing took place between people in China. It was found that guanxi, Confucian dynamism, and collectivism all had a significant influence on information sharing.