工艺参数对TiO2碳热还原合成Ti（C,N）粉末的影响

本文探讨了ＴｉＯ２碳热还原法合成Ｔｉ（Ｃ，Ｎ）粉末过程中合成温度，保温时间，Ｎ２气流量，Ｃ／Ｔｉ比值等工艺参数的变化对粉末性状的影响，实验表明，Ｎ比Ｃ更易于Ｔｉ结合，改变工艺对数可调整Ｔｉ（Ｃ１－ｘＮｘ）的ｘ值。在１４００～１７００℃间可获得ｘ值的０．６～０．８５的Ｔｉ（Ｃ１－ｘＮｘ）粉末。     

一种用单片机制作的高频正弦波逆变器

本文介绍一种简单廉价的单片机AT89C2051实现正弦波脉宽调制、保护的逆变器电路，以及逆变器的整体设计和工作原理，为小型正弦波逆变器的设计制作提供了一种较新的思路。     

Characterization of (Y,Gd) BxV1-xO4-x:Eu Phosphor Prepared by Coprecipitation Reaction

White body-color (Y, Gd)BxV1- xO4-x :Eu3 phosphors were prepared by coprecipitation reaction. Under VUV excitation at 147 nm, the red emission colorimetric purity of (Y, Gd)BxV1- xO4-x :Eu3 phosphor is much better than that of commercial PDP (plasma display panels) phosphor (Y, Gd)BO3:Eu3 . But its relative emission intensity is only about 90% of the commercial phosphor.     

PLC 控制的榨菜自动包装机控制系统的可靠性研究及其通讯监测

本文着重研究了榨菜自动包装机控制系统的可靠性，并对其运行状态进行通讯监测     

Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-part II: applications to IM drives with diode front end

The main theme of this paper is to demonstrate the applications of the newly developed common-mode voltage reduction pulsewidth-modulation (PWM) technique, which restricts the common-mode voltage to one-third of DC-link voltage, to vector-controlled induction motor drives. As compared to previous common-mode voltage reduction techniques, the presented technique can be applied to the inverter with diode front end and has no adverse effect on the linear modulation range. Therefore, vector-controlled drives using the developed technique for inverter control have a wide speed range. Moreover, the effects of the common-mode voltage reduction PWM technique on speed response for vector-controlled induction motor drives will be fully investigated in this paper. It will be demonstrated by intensive experimental results that speed performance does not deteriorate significantly within the rated speed range.     

Low-temperature X-ray microanalysis of the differentiating vascular tissue in root tips of Lemna minor L

The fracture faces of bulk-frozen tissue offer a number of advantages for the analysis of diffusible elements. They are easy to prepare, remain uncontaminated, and, unlike most frozen-hydrated sections, can be shown to exist in a fully hydrated state throughout examination and analysis. Root tips of Lemna minor briefly treated with a polymeric cryoprotectant are quench frozen in melting nitrogen. Fractures are prepared using the AMRAY Biochamber, lightly etched if necessary to reveal surface detail and carbon coated while maintaining the specimen at 110 K. The frozen-hydrated fracture faces are analysed at 110 K using the P/B ratio method which is less sensitive to changes in surface geometry and variations in beam current. The method has been used to investigate the distribution of seven elements (Na+, Mg⁺⁺, P, S, Cl^?, K+ and Ca⁺⁺) in the developing vascular tissue of the root tip. The microprobe can measure relative elemental ratios at the cellular level and the results from this present study reveal important variations in different parts of the root. The younger, more actively dividing cells, appear to have a slightly higher concentration of diffusible ions in comparison to the somewhat older tissues which have begun to differentiate into what are presumed to be functional vascular elements.     

高能同步辐射光源逐束团束流位置测量电子学研制

基于高能同步辐射光源（HEPS）储存环,研制了一套逐束团束流位置测量（BPM）电子学系统,电子学的硬件部分由模拟信号采集板卡和数字信号处理板卡组成,软件部分由底层固件和顶层应用软件组成。系统的采样频率为500 MHz,带宽为1 GHz,对来自储存环BPM探头的4路模拟信号进行数字化,得到束团幅度数据,利用ZYNQ芯片计算出每个束团在真空管道中的位置。逐束团BPM电子学在实验室的测试结果为：输入信号峰峰值小于1.8 V时ADC通道非线性度小于1%,无杂散动态范围约60 dB,灵敏度系数取8.26 mm时位置分辨率优于10 μm,测试结果满足HEPS逐束团BPM的需求。     

SiC薄膜的阻氚性能研究

在不锈钢基体表面用离子束混合技术沉积SiC薄膜,然后用能量为5 keV的H+对其辐照直至剂量达到1×1018/cm2,再用二次离子质谱分析(SIMS)分析H+在SiC薄膜中深度分布和正离子谱,研究薄膜的阻氢性能和阻氢机理;最后采用渗透实验对涂覆在不锈钢基体表面的SiC材料的氚渗透系数进行测试,对其阻氚性能进行验证.结果表明,在不锈钢基材表面涂覆的SiC薄膜具有良好的阻氢性能,可将氚的渗透率降低4个数量级以上,SiC薄膜的阻氢是由于氢与薄膜中的硅、碳悬挂键反应形成诸如C-H、C-H2、C-H3、Si-H、Si-H2和Si-H3引起的.     

Termination detection for dynamically distributed systems with non-first-in-first-out communication

We propose a new algorithm for detecting termination of distributed systems. The algorithm works correctly whether the system is static or dynamic, whether the interprocess communication is synchronous or asynchronous, and whether the communication channels are first-in-first-out or not. The algorithm requires, in the worst case, O(nm) control messages in all, where n is the number of processes in the system and m is the total number of messages transmitted during the operation of the system. After the system terminates, the algorithm is able to detect the termination using only O(n) control messages; it is optimal if the system concerned is static.     

Dynamic characteristic analysis of TBM tunnelling in mixed-face conditions

In this paper, by taking into account the periodically varying mesh stiffness in multiple pinions transmission and the speed–torque characteristics of variable frequency motor drives, the dynamic model for the revolving system of tunnel boring machine (TBM) has been established. Based on the soft ground/hard rock assumption of mixed-face conditions and the analysis of cutting force on each disc cutter and each drag bit, the time-varying excavation torque on the TBM cutterhead in mixed-face tunnelling is obtained. The dynamic excavation torque and cutterhead rotation speed are discussed and compared for TBM tunnelling in several typical mixed-face conditions, which are characterized by the area percentage of soft ground on the excavation face and the uniaxial compressive strength (UCS) of rock. The results show that the excavation torque may run up to a critical value and fluctuate greatly in extremely adverse excavation environments, which may lead to an unexpected TBM stoppage and even a catastrophic failure of the drive motor. To decrease the penetration per revolution in time through applying a lower advance velocity and a higher cutterhead revolution will significantly reduce the excavation torque and effectively avoid such situations.