Theoretical Evalution of Signatures and CNR Penalties Caused by Modem Impairments in Multilevel QAM Digital Radio Modems

A calculation method for symbol error probability is proposed for multilevel QAM systems. Carrier-to-noise ratio penalties are estimated by this method for seven typical impairment factors, including recovered carrier phase error, timing error, receive filter residual delay, etc. The validity of the method is verified by experiments on penalties caused by recovered carrier phase error and timing error. Based on the new method of analysis, signatures of a 64 QAM modem are estimated theoretically, using a pseudo-two-ray model of multipath fading. The dependence of signatures on the above-mentioned impairment factors is investigated in detail. A qualitative deduction of impairment factors from a measured signature is demonstrated. The measured signature agrees well with a calculated one in which reasonable values of the impairment factors are assumed.     

Submilliampere lasing of Zn-diffused mesa buried-hetero AlxGa1-xAs/GaAs multi-quantum-well lasers at 77 K

Extremely low-threshold semiconductor lasers were fabricated by forming Zn-diffused mesa buried-hetero (DMB) structures from low-pressure MOCVD-grown AlxGa1-xAs/GaAs multi-quantum-well, separate-confinement heterostructure wafers. CW threshold currents as low as 880 ?A at 77 K and 2.4 mA at room temperature were obtained for a 100 ?m-long device.     

Synthesis of a fullerene/expanded graphite composite and its lubricating properties

A fullerene/expanded graphite composite, in which fullerene crystals were incorporated into the expanded graphite interspaces, was prepared by chemical and thermal treatments and its lubricating properties in commercial grease were investigated. Expanded graphite, which was synthesized from graphite by oxidizing by KMnO₄ in 98% H₂SO₄ containing NaNO₃ and by heating at 400 °C for 3 min, and fullerene were placed in a stainless steel tube, and were heated in a furnace under vacuum at 600 °C for 2 weeks. The fullerene/expanded graphite composite obtained was characterized by X-ray diffraction analysis (XRD), Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM). XRD and FT-IR analyses showed that crystalline fullerene was present in the material and SEM images confirmed that it existed in the expanded graphite interspaces. The composite was blended with a commercial grease, and its lubricating properties were investigated using a four-ball lubricant tester. These properties were evaluated by measuring the wear scar diameter and wear volume loss of the test ball. The combination of composite and grease provided a better lubricating performance than that of pure graphite and grease.     

Evaluation of three-dimensional effects in short deep beams using a rigid-body-spring-model

Three-dimensional (3-D) effects in short deep beams without stirrups that failed in shear were investigated experimentally and analytically. Two deep beams with a shear span to depth ratio (a/d) of 0.5 and with different beam widths were tested. The effect of beam width on load-carrying capacity, failure mode, crack pattern and 3-D behavior was investigated, and shape effect due to beam width was clarified. In addition, the beams were analyzed by the 3-D rigid-body-spring model (RBSM). RBSM is a discrete form of modeling that presents realistic behavior from cracking to failure, and 3-D RBSM is applicable to simulate 3-D behavior as well as the confinement effect of concrete. Analytical results in terms of load–displacement curves and crack pattern are compared with the experimental results. Three-dimensional deformations, strut widths and cross-sectional stress distribution are investigated analytically and compared with the experimental results to determine 3-D behavior in detail. The 3-D effects in short deep beams are clarified.     

Safety and structural analysis of polymers produced in manufacturing process of alpha-lipoic acid

Alpha-Lipoic acid has recently been permitted for use in foodstuffs and is contained in tablets and capsules. Although alpha-lipoic acid is synthesized from adipic acid, the safety of polymers produced during the purification and drying processes has been an issue of concern. Hence, we examined the safety profiles of thermally denatured polymer (LAP-A) and ethanol-denatured polymer (LAP-B) produced in the manufacturing process of alpha-lipoic acid. Furthermore, we conducted structural analysis of these polymers by 1H-NMR and FAB-MS spectroscopy. In a consecutive ingestion test, male and female mice ingested diet containing 0.1 and 0.2% LAP-A and -B for 4 weeks. Blood uric acid, potassium and lactate dehydrogenase (LDH) tended to increase without dose-dependency. Relative liver weights were also increased. However, male dogs that were orally administered LAP-B (500 mg/kg) once did not show any abnormalities in blood parameters or general condition. These findings indicate that alpha-lipoic acid polymers are not acutely toxic; however, chronic ingestion of these polymers may affect liver and kidney functions.     

Chlorine isotope fractionation during reductive dechlorination of chlorinated ethenes by anaerobic bacteria

Chlorine isotope fractionation during reductive dechlorination of trichloroethene (TCE) and tetrachloroethene (PCE) to cis-1,2-dichloroethene (cDCE) by anaerobic bacteria was investigated. The changes in the 37Cl/35Cl ratio observed during the one-step reaction (TCE to cDCE) can be explained by the regioselective elimination of chlorine accompanied by the Rayleigh fractionation. The fractionation factors (alpha) of the TCE dechlorination by three kinds of anaerobic cultures were approximately 0.994-0.995 at 30 degrees C. The enrichment of 37Cl in the organic chlorine during the two-step reaction (PCE to cDCE) can be explained by the random elimination of one chlorine atom in the PCE molecule followed by the regioselective elimination of one chlorine atom in the TCE molecule. The fractionation factors for the first step of the PCE dechlorination with three kinds of anaerobic cultures were estimated to be 0.987-0.991 at 30 degrees C using a mathematical model. Isotope fractionation during the first step would be the primary factor for the chlorine isotope fractionation during the PCE dechorination to cDCE. The developed models can be utilized to evaluate the fractionation factors of regioselective and multistep reactions.     

Factors affecting the oxidative activity of laccase towards biphenyl derivatives in homogeneous aqueous-organic systems

Catalytic oxidation of biphenyl derivatives was investigated using laccase in a homogeneous aqueous-organic system. A thermostable laccase from Trametes sp. showed the highest catalytic activity for the oxidation of 4-hydroxybiphenyl (4-HB) at a reaction temperature of 60 degrees C when dimethylsulfoxide (DMSO) was employed as a co-solvent. Furthermore, the catalytic performance was successfully enhanced by the incorporation of a laccase mediator system (LMS) into the aqueous-DMSO media. The catalytic performance strongly depended on the type of mediator, and the highest activity was observed with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as mediator, suggesting the importance of the selection of a suitable mediator. It was verified that this mediator system is applicable to the oxidation of several biphenyl derivatives with hydroxyl groups.