Role of support in reforming of CH4 with CO2 over Rh catalysts

The reforming of CH₄ with CO₂ over supported Rh catalysts has been studied over a range of temperatures (550–1000 K). A significant effect of the support on the catalytic activity was observed, where the order was Rh/Al₂O₃>Rh/TiO₂>Rh/SiO₂. The catalytic activity of Rh/SiO₂ was promoted markedly by physical mixing of Rh/SiO₂ with metal oxides such as Al₂O₃, TiO₂, and MgO, indicating a synergetic effect. The role of the metal oxides used as the support and the physical mixture may be ascribed to the promotion in dissociation of CO₂ on the surface of Rh, since the CH₄ + CO₂ reaction is first order in the pressure of CO₂, suggesting that CO₂ dissociation is the rate-determining step. The possible model of the synergetic effect was proposed.     

Effects of saccharin and aliphatic alcohols on the electrocrystallization of nickel

The effects of saccharin and three kinds of aliphatic alcohols (n-propyl alcohol, allyl alcohol, propargyl alcohol) on the surface morphology and crystal orientation of electrodeposited nickel from a Watts bath (1 M NiSO₄ + 0.21 M NiCl₂ + 0.51 M H₃ BO₃ have been studied by means of electrochemical methods, scanning electron microscopy, energy-dispersive X-ray analysis and measurements of X-ray diffraction patterns. Saccharin and three kinds of aliphatic alcohols were adsorbed on the electrode and inhibited the reduction of nickel ion. The inhibitory effect on the reduction of nickel ion increased in the order n-propyl alcohol, allyl alcohol and propargyl alcohol. Large granular electrodeposits were obtained from the Watts bath in the absence of organic additives. When saccharin was added, fine-grained crystals were observed and the surface roughness was relatively small. When aliphatic alcohols were added, the size of surface morphological features became smaller in the order n-propyl alcohol, allyl alcohol and propargyl alcohol. Fine-grained, compact and smooth nickel electrodeposits, which had a preferred orientation with a (111) plane parallel to the surface, were obtained from the Watts bath containing both saccharin and propargyl alcohol.     

Scanning magnetic microscope system utilizing a magneto-impedance sensor for a nondestructive diagnostic tool of geological samples

We have developed a scanning magneto-impedance (MI) magnetic microscope to image surface stray magnetic fields of room-temperature geological samples with submillimeter resolution. The instrument consists of a small, 30 microm diameter, 5 mm length amorphous wire-based magneto- impedance (MI) sensor without any cooling mechanisms. The spacing between the sensor head and the sample was less than 300 microm. The length of the amorphous wire and sample-to-wire distance limits the spatial resolution. We have achieved a spatial resolution of 400 microm with a magnetic resolution of 10 nT. This instrument enables us to map a two-dimensional out-of-page component of a stray magnetic field of a natural remanent magnetization over a millimeter-thick slab of a primitive ordinary chondrite meteorite, documenting dipolelike features. A comparison of element mapping images with the stray field of the meteorites reveals what individual metals carry the dipolar remanences in the meteorites. These results suggest that the scanning MI microscope offers a room-temperature operable, small, low-maintenance alternative to the scanning SQUID microscope, and can aid in the interpretation of the magnetic remanence acquisition process of a meteorite.     

Hydrogenation properties and crystal structures of Ti−Mn-V BCC solid solution alloys

We have proposed new hydrogen absorbing alloys of the ‘Laves phase related BCC solid solution alloy’, the hydrogen capacity of which reaches almost double that of conventional rare-earth based AB₅ alloys. We have reported the hydrogen absorbing properties of Ti−V−Mn, Ti−V−Cr and T−V−Mn−Cr alloys. It has been accepted that the crystal structural change of BCC hydrogen absorbing alloys is the same as that of V metal. The mono-hydride (H/M=1) of V metal has a BCT structure and the di-hydride (H/M=2) has an FCC structure. However, we recently found that the Ti−V−Mn alloy shows different behaviors in phase transformation with hydrogenation to V metal. We found three hydride phases with a BCC, a deformed FCC and an FCC structure in the Ti−V−Mn solid solution alloy-H₂ system. The deformed FCC hydride phase has not yet to our knowledge been reported. The lattice constant of the deformed FCC was 0.407 nm, one axis of which is reduced by about 4%. Its single-phase region appeared at a hydrogen content between 0.8 H/M and 1.0 H/M in absorption at 298 K. The lower plateau observed due to formation of the deformed FCC hydride phase gives an increase of effective hydrogen capacity by decreasing hydrogen remaining in the alloy in the desorption process. This article based on a presentation made in the symposium “The 2nd KIM-JIM Joint Symposium: Hydrogen Absorbing Materials”, held at Hanyang University, Seoul, Korea, October 27–28, 2000 under the auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

High resolution extreme ultraviolet spectrometer for an electron beam ion trap

An extreme ultraviolet spectrometer has been developed for spectroscopic studies of highly charged ions with an electron beam ion trap. It has a slit-less configuration with a spherical varied-line-spacing grating that provides a flat focal plane for grazing incidence light. Alternative use of two different gratings enables us to cover the wavelength range 1-25 nm. Test observations with the Tokyo electron beam ion trap demonstrate the high performance of the present spectrometer such as a resolving power of above 1000.     

Experimental study on hysteresis phenomena of shock wave structure in an over-expanded axisymmetric jet

In recent studies on two-dimensional supersonic jets, it is reported that the hysteresis phenomenon for the reflection type of shock waves in the jet flow field is occurred under the quasi-steady flow condition and this phenomenon is affected by the transitional pressure ratio between the regular reflection and Mach reflection. However, so far, there are few researches on the hysteresis phenomenon for the transition of shock waves between regular and Mach reflection in over-expanded supersonic jets and the phenomenon has not been investigated satisfactorily. Therefore, the purpose of this study is to clarify the hysteresis phenomena for the reflection type of shock wave in the over-expanded axi-symmetric supersonic jet experimentally, and to discuss the relationship between hysteresis phenomenon and rate of the change of pressure ratio with time. Furthermore, the effect of Mach number at the nozzle exit on hysteresis loop was investigated for two kinds of nozzle.     

Ionic liquid enables simple and rapid sample preparation of human culturing cells for scanning electron microscope analysis

Ionic liquid is a kind of salt that stays in a molten state even at room temperature. It does not vaporize at all in vacuum and facilitates electrical conductivity to the sample surfaces for observations with a scanning electron microscope (SEM). In this study, we used an ionic liquid in SEM for the first time to observe fixed human culture cells. The condition for the cell culture using wrapping sheets and SEM settings were varied to elucidate the optimized protocol. Compared to samples prepared by the conventional way, the ionic liquid‐treatment of samples gave SEM images of the cellular ultra structures in more detail, enabling observation of microvilli that made bridges between separated cells. In addition, the ionic liquid treatment is less time consuming as well as less laborious compared with the conventional way that includes dehydration, drying, and conductivity treatments. Totally, we concluded the ionic liquid is a useful reagent for SEM sample preparation. Microsc. Res. Tech., 2011. © 2010 Wiley‐Liss, Inc.     

Glasslike Transitions in Thin Polymer-Melt Films Due to Thickness Constraint

The shear properties of thin films of star and linear polyisoprene (PIP) melts under high pressure were investigated as a function of sliding velocity (shear rate) using the surface forces apparatus. The results were contrasted with their bulk rheological properties; effects of thickness constraint on the shear behavior were discussed. The melts of PIP in bulk exhibit Newtonian-like constant viscosity at least at low shear rates (frequencies), which suggests that individual molecules flow with lateral sliding motion. However, thin films of PIP melts show tribological features involving apparent shear-thinning behavior, indicative of the correlated motions in confined geometries. The shear-property change from bulk rheological behavior to thin-film tribological behavior along with the thickness decrease reflects the physical states and their transitions in the systems; the thickness constraint induces glasslike transitions. Effects of molecular weights and molecular architecture (star-branched or linear) on the shear properties are also discussed.     

Simulation of fretting-fatigue life by using stress-singularity parameters and fracture mechanics

Fretting-fatigue cracks start very early in a fretting-fatigue life. The fretting-fatigue life is dominated by the propagation of small cracks. Therefore, predicting the start of fretting-fatigue cracking and the propagation of the cracks is a very important part of estimating fretting-fatigue strength and fretting-fatigue life. The start of a fretting-fatigue crack was estimated by using the stress-singularity parameters at the contact edges. The way in which the crack propagates was then estimated by using fracture-mechanics analysis, in which the wear on the contact surfaces and the direction of crack propagation were taken into account.     

Vitamin E reduces cholesterol esterification and uptake of acetylated low density lipoprotein in macrophages

The effects of vitamin E on cholesteryl ester (CE) metabolism in 1774 cells were examined. Pretreatment of 1774 cells with vitamin E at concentrations above 50 μM significantly decreased acetylated low density lipoprotein (LDL)-induced incorporation of [¹⁴C]oleate into CF in cells in a dose-dependent manner. This was partly due to vitamin E Also significantly inhibiting the uptake of [³H]CE-labeled acetylated LDL by 1774 cells. A trend existed toward suppression of acyl-CoA:cholesterol acyltransferase (ACAT) activity in the cell lysate at high vitamin E concentration, but there was no effect on hydrolysis of CE. These data indicate that vitamin E reduces the uptake of modified LDL and suppresses ACAT activity, resulting in less cholesterol esterification in macrophages; a novel mechanism underlying the antiatherogenic properties of vitamin E.