基于局部差别的形态学边缘检测方法研究

图像边缘特征是图像最基本也是最重要的特征之一.图像边缘特征的提取一直是计算机视觉和图像处理领域的经典研究课题,在精确制导武器的制导图预处理中有着广泛地应用.针对经典的边缘检测算子不能很好地提取噪声图像边缘这一问题,在数学形态学的基础上,提出了一种边缘提取方法.利用局部差别准则确定图像中受噪声影响的像素点,并对其进行形态学操作,滤除噪声,保存边缘.实验表明,该算法不仅具有很好的边缘提取能力,还具有很强的抗噪能力.说明了该算法的有效性和实用性.     

碳纳米管及其批量制备研究进展

从碳纳米管的优异性能和应用出发,综述了碳纳米管的制备方法以及我国目前在碳纳米管研究中面临的问题;分析了碳纳米管产业化对的我国纳米技术产业化发展的积极意义,特别介绍了清华-南风纳米粉体产业化工程中心开发的、具有我国自主知识产权的纳米聚团流态化技术。     

骆马湖水环境变化趋势及对策研究

随着经济发展、城市化率的提高，加之滨湖开发，骆马湖的水质呈现一定的恶化趋势，生态系统遭受破坏，水体富营养化发展有越来越严重的趋势。通过对骆马湖营养化程度和污染原因的分析，提出了一些对策措施和解决办法，以期实现湖泊的生态、环境与经济的协调发展。     

新型涂料增稠剂的化学成分鉴定

本文用红外光谱法对一种新型涂料增稠剂进行了化学成分鉴定,其主要成分为羟丙基甲基纤维素与蒙脱土。     

A segmentation-based fine-grained peer sharing technique for delivering large media files in content distribution networks

Delivering large media files over the Internet is a challenging task because it has some unique features that are different from delivering conventional Web documents. In this paper, we propose a fine-grained peer sharing technique for dealing with the problem in the context of content distribution networks. The key difference of the technique from conventional peer-to-peer systems is that the unit of peer sharing is not a complete media file, but at a finer granularity. By doing so, we improve the flexibility of replica servers for handling client requests. We analyze the storage requirement at replica servers and design a scheduling algorithm to coordinate the delivery process from multiple replica servers to a client. Our simulations show that the fine-grained peer sharing approach can reduce the initial latency of clients and the rejection rate of the system significantly over a simple peer sharing method.     

Formation of mushroom-like ZnO microcrystals through a solution calcination process

Mushroom-like ZnO microcrystals have been prepared via a solution calcination route, using Zn(NO₃)₂ as Zn source in the absence of any surfactants, templates or catalysts. This is the first example to prepare mushroom-like crystals as semiconductors, which are expected to show particular physical properties. The ZnO products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy and photoluminescence (PL) spectrum measurements. A suitable concentration of Zn(NO₃)₂ solution was important for the growth of the mushroom-like products. The reported synthetic procedure is straightforward and inexpensive, and thus can be readily adopted to produce large quantities of mushroom-like ZnO microcrystals.     

基于计算机视觉的油管螺纹非接触智能检测

针对传统接触式油管螺纹参数测量方法的缺点,开发了基于计算机视觉的油管螺纹非接触智能检测系统。在简述非接触智能检测测量原理和测量系统组成的基础上,详细介绍了利用非接触智能检测系统对油管螺纹参数进行测量的方法,其中包括图像的采集及预处理,图像的锐化,螺纹边缘轮廓的检测与提取,螺纹尺寸的测量计算与对比分析。     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

多排数翅片管空冷器风阻特性的数值模拟

本文对多排数翅片管空冷器空气侧的风阻特性进行了数值模拟.利用商用软件Fluent进行数值计算,结合经验公式和已有的实验数据,分析了不同入口风速下,阻力的变化规律以及流动阻力和温度变化对模拟计算的影响.     

Vibration thresholds for fretting corrosion in electrical connectors

Single frequency vibration tests were used to induce fretting corrosion in tin alloy plated contacts. The samples used in this study were connectors consisting of 25 pairs of mated pin and socket contacts. Experimental results for a variety of vibration levels, frequencies, and wiring tie-off lengths are presented. The experiments consisted of running a series of vibration tests at each frequency where the excitation level was stepped through a range of g-levels. During each test run contact resistance was monitored as a performance characteristic. The results exhibit threshold behavior at each frequency for the onset of fretting degradation. Typically a plateau region was observed where similar g-levels produced similar fretting rates. It was also found that outside the plateau region the g-levels varied according to the dynamic behavior of the mechanical system. In addition, a transfer matrix model was used to analyze these results. An empirical fit of the data correlated well with the model when damping was used. This analysis revealed the importance of the bending moment induced at the contact interface as a result of excitation levels and tie-off configurations. Consequently, it is concluded that dynamic response of the mechanical system under various g-levels and tie off configurations can greatly impact the performance of a connector system subjected to vibration stresses.