Biomechanical study of sternal closure using rigid fixation techniques in human cadavers

BACKGROUND: We believe rigid plate fixation may be superior to wire fixation in sternal closure, as rigid fixation used in the craniofacial skeleton has shown greater stability, lower postoperative pain, and accelerated bone healing. We hypothesize that sterna fixed with titanium plates are more stable mechanically than sterna fixed with wires. METHODS: The sterna from human cadavers were used in this two-phased study. Phase I compared wires to four-hole titanium straight plates. Phase II compared wires to four-hole titanium custom H plates. The sterna were tested biomechanically using all fixation methods. RESULTS: Phase I showed no statistically significant difference in the stiffness or lateral displacement between the wired and straight plated sterna. Phase II showed a statistically significant greater stiffness (p < 0.05) and less lateral displacement (p < 0.05) in the custom plated sterna over the wired sterna. CONCLUSIONS: Our results showed that custom titanium H plates were superior to wire fixation. Furthermore, our results established the importance of plate configuration in sternal fixation. Our study may have beneficial clinical implications, as decreased motion at the sternotomy site could mean less postoperative pain, a decreased incidence of infection, and accelerated bone healing.     

Quantitative source identification of dioxin-like PCBs in Yokohama, Japan, by temperature dependence of their atmospheric concentrations

The source and environmental behavior of dioxin-like polychlorinated biphenyls (PCBs) together with other PCBs and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) were evaluated based on analysis of variations in their atmospheric concentrations in Yokohama, Japan. Potential factors responsible for variations in the atmospheric concentrations of the congeners were investigated by principal component analysis and multiple regression analysis of the data. Two major variations were seen: one had strong temperature dependence, while the other had no significant temperature dependence. A possible explanation for this difference is that the former is related to congeners released by volatilization (e.g., volatilization from commercial PCB products and past polluted environments), while the latter is related to congeners emitted from thermal processes. The relative contributions of dioxin-like PCBs released by volatilization and those emitted from thermal processes were estimated based on the temperature dependence of the atmospheric concentrations. The results suggest that both dioxin-like PCBs emitted from thermal processes and those released by volatilization are significant sources of air pollution in this area in terms of the toxic equivalent (TEQ) for dioxin-like PCBs. We demonstrated that the present approach based on variations in atmospheric concentrations can be useful in providing a qualitative as well as quantitative understanding of source information.     

Ultraviolet-visible and surface-enhanced Raman scattering spectroscopy studies on self-assembled metalloporphyrin films on organic monolayer-modified ultra-thin silver substrates

A self-assembled monolayer (SAM) film of 5,10,15,20-tetra-(para-chlorophenyl)-porphyrin terbium (or lutetium) hydroxy compound (TbOH/LuOH) fabricated on a silver substrate premodified with a SAM of 4-mercaptopyridine (PySH) was studied by ultraviolet-visible (UV-Vis) spectroscopy and surface-enhanced Raman scattering (SERS) spectroscopy. PySH can modify the substrate and deliver its pyridyl group pointing out from the silver surface. Thus, we can investigate the effects of the central metals of the metalloporphyrins in the formation of the composite films. For the TbOH-PySH composite film, a new absorption band arising from TbOH appears at 425 nm, and a band at 512 nm due to the PySH-modified silver substrate shifts to a longer wavelength (538 nm). The results suggest that TbOH is successfully assembled on the top of PySH-modified silver film and that there is an interaction between TbOH and PySH in the film. The frequency shifts and relative intensity changes of bands due to PySH in the SERS spectra imply the coordination of the pyridyl group on Tb in the SAM. As for the LuOH-PySH composite film, its SERS spectrum shows bands arising from both the LuOH and PySH moieties, indicating that LuOH is assembled on the PySH-modified silver film. Furthermore, a band at 1221 cm(-1) due to the in-plane C-H bending mode of PySH disappears, implying that the pyridyl moiety of PySH becomes more parallel to the silver surface upon the formation of the LuOH-PySH composite film. Additionally, an absorption band at 515 nm shifts to a longer wavelength (541 nm) and becomes broad upon the formation of the composite film, suggesting an interaction between LuOH and PySH in the film. By comparing the spectral changes between the two self-assembled composite films, we find that the central metal is crucial in the formation of the composite films. The structure and orientation of the composite films depend on the central metal of the metalloporphyrin compounds.     

Part I: surface-enhanced Raman spectroscopy investigation of amino acids and their homodipeptides adsorbed on colloidal silver

Surface-enhanced Raman scattering spectra (SERS) were measured for various amino acids: L-methionine (Met), L-cysteine (Cys), Lglycine (Gly), L-leucine (Leu), L-phenylalanine (Phe), and L-proline (Pro) and their homodipeptides (Met-Met, Cys-Cys, Gly-Gly, LeuLeu, Phe-Phe, and Pro-Pro) in silver colloidal solutions. The geometry and orientation of the amino acids or dipeptides on the silver surface, and their specific interaction with the surface, were deducted by detailed spectral analysis of the SERS spectra. This analysis has allowed us to propose the particular surface geometry of amino acids or dipeptides and also implied that C-C bonds were almost parallel to the surface, as evidenced by the absence of marker bands in the skeletal C-C stretching region of the spectra. Additionally, using "time-dependent" SERS measurements we solved an existing controversy regarding the binding specificity of Gly-Gly on the silver surface.     

Temperature-dependent near-infrared spectra of bovine serum albumin in aqueous solutions: spectral analysis by principal component analysis and evolving factor analysis

Fourier transform near-infrared (FT-NIR) spectra have been measured for bovine serum albumin (BSA) in an aqueous solution (pH 6.8) with a concentration of 5.0 wt% over a temperature range of 45-85 degrees C. Not only conventional spectral analysis methods, such as second-derivative spectra and difference spectra, but also chemometrics, such as principal component analysis (PCA) and evolving factor analysis (EFA), have been employed to analyze the temperature-dependent NIR spectra in the 7500-5500 and 4900-4200 cm-1 regions of the BSA aqueous solution. Intensity changes of bands in the 7200-6600 cm-1 and 4650-4500 cm-1 regions in the difference spectra indicate variations of the hydration and secondary structure of BSA in the aqueous solution, respectively. The plot of a band intensity at 7080 cm-1 in the different spectra shows a clear turning point at 63 degrees C, revealing that a significant change in the hydration occurs at about 63 degrees C. The forward and backward eigenvalues (EVs) from EFA suggest that marked changes in the hydration and secondary structure of BSA take place in the temperature ranges of 61-65 degrees C and 59-63 degrees C, respectively. In addition, the temperature of 71 degrees C marked in the EFA plots may correspond to the onset temperature of increase in the intermolecular beta-sheet structure.     

Defective bone remodelling in osteoprotegerin-deficient mice

Previous studies have reported enhanced osteoclastogenesis, increased bone resorption and osteoporosis in osteoprotegerin (OPG)-deficient mice. In the present study, we show that the tibial epiphyses contain abundant, thin trabeculae lined with numerous osteoclasts and cuboidal osteoblasts. The increase in osteoblasts and osteoclasts was associated with a dramatic increase in calcein labelling of the mineralization fronts and replacement of much of the intertrabecular marrow with numerous alkaline phosphatase-positive preosteoblasts. Furthermore, the discrete, linear cement lines seen in wild-type mice were replaced by a randomly oriented meshwork of cement lines that were stained intensely for tartrate-resistant acid phosphatase and osteopontin in the OPG-/- mice. These indices of accelerated bone remodelling in mutant bone were associated with irregular trabecular surfaces, a disorganized collagen matrix interspersed with amorphous ground substance and numerous fissures between old and new bone. In total, these observations indicate that enhanced osteoclastic activity in OPG-/- epiphyses led to a coupled increase in osteoblast differentiation and activity and an increase in bone remodelling. The high bone turnover, disorganized matrix and impaired attachment of new to old bone in the cement lines in OPG-/- mice appear to cause bone fragility.     

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Phase shift at a turning point in a planar optical waveguide

We present a novel matrix approach to proving that the phase shift at a turning point in a planar optical wave-guide is exactly equal to pi rather than to pi/2 or to some other value. We also show the existence of phase contributions from reflected subwaves, which to our knowledge have never been taken into account previously.     

Statistical two-dimensional correlation spectroscopy: its theory and applications to sets of vibrational spectra

The present study aims at developing a new form of two-dimensional (2D) correlation spectroscopy, statistical 2D correlation spectroscopy. Statistical 2D spectroscopy differs from the widely used generalized 2D correlation spectroscopy in that the former abstracts spectral features by pretreatment and by 2D maps that are limited by the correlation coefficients in the range from 1 to -1. In this paper, the theory of the new 2D method is briefly described, and then its applications are discussed to reveal spectral and concentration features of artificial model spectra, infrared spectra of polycondensation of bis(hydroxyethyl terephthalate) measured on-line, and short-wave near-infrared spectra of raw milk. The results are analyzed thoroughly and compared with those from generalized 2D correlation spectroscopy and partial least-squares loadings and scores. The most significant advantage of statistical 2D correlation spectroscopy is that the 2D correlation spectra are easy to calculate and are purely mathematical in nature, thereby eliminating any subjective involvement of an experimenter, while the inherent weakness of the method lies in its sensitivity to the noise.     

Investigations of the roles of the distal heme environment and the proximal heme iron ligand in peroxide activation by heme enzymes via molecular engineering of myoglobin

To pursue structure-function relationships of heme enzymes in the activation of peroxides, we have chosen to use myoglobin as the framework for our molecular engineering studies. Comparison of the crystal structures of myoglobin and peroxidases reveals differences in the arrangement of amino acid residues in heme active sites. On the basis of these structural differences and the reaction mechanisms of peroxidases, we have converted myoglobin into a peroxidase-like enzyme by alternation of the heme distal pocket via site-directed mutagenesis. The replacement of the proximal histidine with cysteine and the exogenous substituted imidazoles slightly accelerates the peroxide O-O bond cleavage due to the electron donor characteristics. However, we have not observed an enhancement in the activation of peroxide by the proximal mutant with tyrosine, the exogenous phenolate, and benzoate. A clear understanding of the absolute role of the proximal ligand remains elusive.