Effect of the sintering temperature on microstructure and properties of Al2O3–Cu–Ni hybrid composites obtained by PPS

In the present research, the influence of sintering temperature on the microstructure and properties of Al₂O₃–Cu–Ni hybrid composites prepared by the Pulse Plasma Sintering (PPS) technique were described. In this research, three temperatures have been selected: 1250°C, 1300°C, and 1350°C. SEM observations were carried out to determine the distribution of the metallic phase in the composite depending on the sintering temperature. The conducted experiments and microscopic observations enabled a better understanding of the phenomena occurring between the ceramic matrix and metallic phase in the obtained materials. The mechanical properties like a hardness and fracture toughness were measured. The technology applied allowed us to obtain ceramic-metal composites with a homogeneous microstructure. It was found that the sintering temperature influences the selected physical and mechanical properties of the composites produced. It was found that samples produced at 1300°C are characterized by the highest relative density and the mechanical properties.     

Fly ash as a sorbent for boron removal from aqueous solutions: Equilibrium and thermodynamic studies

ABSTRACT

This study presents the application of fly ash from brown coal and biomass burning power plant as a sorbent for the removal of boron ions from an aqueous solution. The adsorption process efficiency depended on the parameters, such as adsorbent dosage, pH, temperature, agitation time and initial boron concentration. The experimental data fitted well with the Freundlich isotherm model and the maximum capacity was found to be 16.14 mg g^?1. The adsorption kinetics followed the pseudo-second-order model. Also, the intra-particle diffusion model parameters were calculated. Thermodynamic parameters such as change in free energy (ΔG°), enthalpy (ΔH°), entropy (ΔS°) revealed on exothermic nature of boron adsorption onto the fly ash.     

Virgin rapeseed oils obtained from different rape varieties by cold pressed method – their characteristics,properties, and differences

The aim of the present study was to compare different rape varieties. For this purpose oil from six different varieties of rapeseeds was cold pressed under laboratory conditions. In the obtained rapeseed oils the fatty acids composition and minor components, characteristic values (acid value; AV and TOTOX), oxidative stability (DSC test), and volatiles were determined and a sensory evaluation was carried out. The highest oxidative stability was found for oil from sample 5 (IP = 158 min), which also has the lowest amount of C18:3 (7.8%), chlorophylls (0.083 mg/kg), and metals (Cu²⁺ 0.02 mg/kg and Fe²⁺ 0.08 mg/kg). This oil has also the lowest AV (0.17 mg KOH/g), which may be related to the lowest moisture content of the seeds prior to extraction. It was characterized by the highest rapeseed flavor intensity. The lowest induction period was observed for samples 3 and 6 (100 min). Although sample 3 had the same low level of metals as sample 5 and the highest concentration of tocopherols (635 mg/kg), PUFA (33.9%), and AV (1.37 mg KOH/g) it also had the lowest intensity of rapeseed flavor among the analyzed oils. Sample 6, despite its low percentage of PUFA (24.7%), conjugated diens and triens, and the lowest content of total volatiles (0.4Vs), had the highest concentration of metals (Cu²⁺ 0.04 mg/kg and Fe²⁺ 0.34 mg/kg).     

Current state and perspectives for oilseed rape production for energy purposes in Poland

The article aims to analyze the current state and determine the perspectives for oilseed rape production for energy purposes in Poland. According to the study, in recent years the oilseed rape area for energy purposes and the production of biocomponents and biofuels from oilseed rape have been on the rise in Poland. The considerable and spatially concentrated energy potential of oilseed rape in Poland is noted. It is indicated that the greatest energy potential of the oilseed rape production is the four neighboring voivodeships: Dolno?l?skie, Opolskie, Wielkopolskie, and Kujawsko-Pomorskie.     

Synthesis, Crystal Structure, Spectroscopic and Thermal Investigations of a Novel 2D Sodium(I) Coordination Polymer Based on 2-Aminoterephthalic Ligand

The reaction of sodium hydroxide with 2-aminoterephthalic acid leads to the formation of a complex of the general formula: [Na₂(atpt)(H₂O)₅]·H₂O, where atpt?=?[NH₂C₆H₃(COO)₂]^2?. Sodium 2-aminoterephthalate was synthesized and characterized by single-crystal X-ray diffraction, FT-IR spectroscopy, thermal analysis and coupled TG–FT-IR technique. Crystallographic study of the sodium complex reveals that the compound crystallizes in the triclinic system, the space group P-1 with a?=?7.983(3) ?, b?=?8.405(3) ?, c?=?11.311(5) ?, α?=?70.74(3)°, β?=?76.57(3)°, γ?=?83.12(3)° and V?=?696.1(5) ?³. On heating in air atmosphere the compound in question loses all water molecules in two steps in the temperature range 30–205?°C. The anhydrous form of the complex is stable up to 370?°C and then decomposes to sodium carbonate.     

Analysis and mathematical modelling of the behaviour of Escherichia coli in the mascarpone cheese during cold storage

The aim of this work was to study the behaviour of E. coli in mascarpone cheese during storage at the temperatures ranging from 3 to 15 °C, as well as application of predictive microbiology to describe the experimental data. The Baranyi, Gompertz and logistic models were fitted at the stage of primary modelling. Although all applied primary models described the growth of micro‐organisms accurately, the most accurate goodness of fit was obtained for the Gompertz model and the growth rates generated by this model were used for secondary modelling. The polynomial model predicted accurately the influence of temperature on the growth rate of E. coli, reaching the adjusted coefficient of linear regression 0.99. Generated predictive model that describes the growth of E. coli in mascarpone cheese constitutes a valuable tool in assessing the microbiological stability of the food product with similar physicochemical properties.     

Development of monolithic porous composites using carbonized coals as block porous supports, and poly(furfuryl alcohol) and chitosan as fillers

In this study, monolithic block cokes have been used as supports to develop carbon–carbon and carbon–polymer monolithic block composites using poly(furfuryl alcohol) and chitosan as fillers. Cokes were produced from single coals and coal blends by carbonization at 950 °C. The supports and the resultant composites were characterized by means of elemental analysis (carbon, hydrogen and nitrogen—CHN), low-temperature physical adsorption of nitrogen, gas helium densitometry, electric and ultrasonic measurements. Morphology of the supports and the composites was observed using scanning electronic microscope. The supports were found to be porous carbon materials of high C content within the range of 97.6–98.5 wt%, of porous structure characterized by macropores, with low contribution of mesopores with diameters of 17–25 nm. The resultant composites were found to be porous light materials with apparent density of less than 1 g/cm³, and bulk porosity ranging from 35 to 54 %, with high stiffness evidenced by dynamic elastic moduli reaching values up to ~5 GPa. Addition of the polymers to the cokes (block supports) was found to worsen electrical properties giving the electrical conductivity values ranging from 0.2 to 0.5 S/cm for all composites studied.     

Diminazene Aceturate Stabilizes Atherosclerotic Plaque and Attenuates Hepatic Steatosis in apoE-Knockout Mice by Influencing Macrophages Polarization and Taurine Biosynthesis

Atherosclerosis and nonalcoholic fatty liver disease are leading causes of morbidity and mortality in the Western countries. The renin–angiotensin system (RAS) with its two main opposing effectors, i.e., angiotensin II (Ang II) and Ang-(1–7), is widely recognized as a major regulator of cardiovascular function and body metabolic processes. Angiotensin-converting enzyme 2 (ACE2) by breaking-down Ang II forms Ang-(1–7) and thus favors Ang-(1–7) actions. Therefore, the aim of our study was to comprehensively evaluate the influence of prolonged treatment with ACE2 activator, diminazene aceturate (DIZE) on the development of atherosclerotic lesions and hepatic steatosis in apoE^−/− mice fed a high-fat diet (HFD). We have shown that DIZE stabilized atherosclerotic lesions and attenuated hepatic steatosis in apoE^−/− mice fed an HFD. Such effects were associated with decreased total macrophages content and increased α-smooth muscle actin levels in atherosclerotic plaques. Moreover, DIZE changed polarization of macrophages towards increased amount of anti-inflammatory M2 macrophages in the atherosclerotic lesions. Interestingly, the anti-steatotic action of DIZE in the liver was related to the elevated levels of HDL in the plasma, decreased levels of triglycerides, and increased biosynthesis and concentration of taurine in the liver of apoE^−/− mice. However, exact molecular mechanisms of both anti-atherosclerotic and anti-steatotic actions of DIZE require further investigations.