Idle-signal casting multiple access with collision resolution(ICMA/CR) protocol for wireless LAN

The authors propose an idle-signal casting multiple access with collision resolution (ICMA/CR) protocol for wireless LAN. This protocol focuses on efficient collision resolution by adopting the binary-tree protocol. By using the collision resolution algorithm, the retransmission process can be controlled so that collisions are resolved more efficiently using nearly immediate feedback information, thereby increasing the throughput-delay performance of the ICMA/CD protocol     

Homogeneous Fabrication of Al2O3–ZrO2–SiC Whisker Composite by Surface-Induced Coating

Al₂O₃–ZrO₂–SiC whisker composites were prepared by surface-induced coating of the precursor for the ZrO₂ phase on the kinetically stable colloid particles of Al₂O₃ and SiC whisker. The fabricated composites were characterized by a uniform spatial distribution of ZrO₂ and SiC whisker phases throughout the Al₂O₃ matrix. The fracture toughness values of the Al₂O₃–15 vol% ZrO₂–20 vol% SiC whisker composites (∼12 MPa.m^1/2) are substantially greater than those of comparable Al₂O₃–SiC whisker composites, indicating that both the toughening resulting from the process zone mechanism and that caused by the reinforced SiC whiskers work simultaneously in hot-pressed composites.     

Temperature behavior of dielectric and piezoelectric properties of samarium-doped lead titanate ceramics

The dielectric and electromechanical coupling properties of Sm-doped and Mn-doped PbTiO(3) ceramics were investigated from 4.2 to 300 K. The upper and lower limits of the ceramic dielectric and piezoelectric properties were calculated by averaging the single-domain constants that were determined from a phenomenological theory. Comparisons of the measured and calculated properties were then made. The measured dielectric permittivity epsilon(T)(33) and piezoelectric strain coefficient d(33) appear to be mainly due to the averaging of the intrinsic single-domain response. The large piezoelectric and electromechanical anisotropies present in modified PbTiO(3) ceramics also appear to be an intrinsic property of the material. The piezoelectric coefficient d(31), as well as the planar coupling coefficient k(p), was found to have very small values over two temperature regions, from 120 to 170 K and from 240 to 270 K.     

Composition and temperature dependence of the dielectric, piezoelectric and elastic properties of pure PZT ceramics

Pure (undoped) piezoelectric lead zirconate titanate (PZT) ceramic samples at compositions across the ferroelectric region of the phase diagram were prepared from sol-gel-derived fine powders. Excess lead oxide was included in the PZT powders to obtain dense (95-96% of theoretical density) ceramics with large grain size (>7 mum) and to control the lead stoichiometry. The dielectric, piezoelectric, and elastic properties were measured from 4.2 to 300 K. At very low temperatures, the extrinsic domain wall and thermal defect motions freeze out. The low-temperature dielectric data can be used to determine coefficients in a phenomenological theory. The extrinsic contribution to the properties can then be separated from the single-domain properties derived from the theory.     

Unveiling the Role of Dopant Polarity in the Recombination and Performance of Organic Light‐Emitting Diodes

The recombination of charges is an important process in organic photonic devices, because the process influences the device characteristics such as the driving voltage, efficiency, and lifetime. Here, by using various homoleptic and heteroleptic Ir complexes as dopants, it is reported that the stationary dipole moment (μ₀) of the dopant rather than the trap depth (ΔE_t ) is a major factor determining the recombination mechanism in dye‐doped organic light‐emitting diodes (OLEDs). Dopants with large μ₀ (e.g., homoleptic Ir(III) dyes) induce large charge trapping on them, resulting in high driving voltage and trap‐assisted recombination‐dominated emission. On the other hand, dyes with small μ₀ (e.g., heteroleptic Ir(III) dyes) show Langevin recombination‐dominated emission characteristics with much less charge trapping on them no matter what ΔE_t is, leading to lower driving voltage and higher efficiencies. This finding will be useful in any organic photonic devices such as phosphorescent or thermally assisted delayed fluorescent dye sensitized fluorescent OLEDs where trapping and recombination mechanisms play key roles.     

Air‐Stable Cesium Lead Iodide Perovskite for Ultra‐Low Operating Voltage Resistive Switching

CsPbX₃ (X = halide, Cl, Br, or I) all‐inorganic halide perovskites (IHPs) are regarded as promising functional materials because of their tunable optoelectronic characteristics and superior stability to organic–inorganic hybrid halide perovskites. Herein, nonvolatile resistive switching (RS) memory devices based on all‐inorganic CsPbI₃ perovskite are reported. An air‐stable CsPbI₃ perovskite film with a thickness of only 200 nm is successfully synthesized on a platinum‐coated silicon substrate using low temperature all‐solution process. The RS memory devices of Ag/polymethylmethacrylate (PMMA)/CsPbI₃/Pt/Ti/SiO₂/Si structure exhibit reproducible and reliable bipolar switching characteristics with an ultralow operating voltage (<+0.2 V), high on/off ratio (>10⁶), reversible RS by pulse voltage operation (pulse duration < 1 ms), and multilevel data storage. The mechanical flexibility of the CsPbI₃ perovskite RS memory device on a flexible substrate is also successfully confirmed. With analyzing the influence of phase transition in CsPbI₃ on RS characteristics, a mechanism involving conducting filaments formed by metal cation migration is proposed to explain the RS behavior of the memory device. This study will contribute to the understanding of the intrinsic characteristics of IHPs for low‐voltage resistive switching and demonstrate the huge potential of them for use in low‐power consumption nonvolatile memory devices on next‐generation computing systems.     

Identification of cubic stiffness nonlinearity by linearity-conserved NARMAX modeling

A modeling technique to estimate a NARMAX model is developed to identify nonlinearities which are contained in linear-based nonlinear systems. Considering great contributions by linear parts of the NARMAX model on describing nonlinearities, a linear model, which is estimated from small amplitude input and the corresponding output is taken as the linear part of the NARMAX model. Hence, the capabilities of the model to predict nonlinear behaviors for any input within stable region are fairly improved, and multiplicity problem in selecting a nonlinear regression model is also resolved. As an illustration, one degree of freedom system with cubic stiffness is identified in terms of NARMAX modeling technique using the procedure proposed in this work and conventional one, respectively. By extraction higher order FRFs from the NARMAX models, dominant nonlinearities of the system are predicted, and the results by the two methods are compared with analytic one, which shows the priority of the modeling technique proposed.     

Estimation of Part Waiting Time and Fleet Sizing in AGV Systems

As manufacturing systems have grown in size and complexity, material flow control has become one of the key issues for system efficiency, and determination of the number of vehicles required is an important issue in the design of the AGV (automatic guided vehicle) systems for automated material flow control. In an AGV system, a part issues a delivery request for its transportation, and then an empty vehicle is assigned based on a pre-determined vehicle selection rule and provides delivery service. This research presents a fleet sizing procedure for an AGV system with multiple pickup and delivery stations. A queueing model is used to estimate part waiting times. The fleet sizing procedure estimates the minimum number of vehicles needed to ensure a predefined part waiting time limit. While most stochastic models assume first-come-first-served or random vehicle selection rules for the selection of an empty vehicle, this model considers such additional rules as the nearest vehicle selection rule, which is the most popular among all vehicle selection rules. The performance of the proposed model is examined through computational experiments. This work was supported by Korea Research Foundation Grant (KRF-2003-042-D20136).     

Chatter analysis of a parallel mechanism-based universal machining center

Extensive researches have been carried out on machine tool chatter to obtain assessment procedure and improvement measures. In this study, chatter limit is predicted on a newly fabricated universal machining center by the combination of structural dynamic characteristics and cutting mechanics. We showed the unstable cutting conditions, and from them we could plot the unstable borderlines. From the chatter simulations we could say that the newly built universal machining center can be well used in the finishing machining of steel as other common machine tools.