Milk Derived Antimicrobial Bioactive Peptides: A Review

In recent decades, bioactive peptides have attracted increasing interest as health promoting functional foods. A variety of naturally formed bioactive peptides have been found in fermented dairy products such as yogurt, sour milk, and cheese. Initially these peptides are inactive within the sequence of the parent protein molecule and can be generated by gastrointestinal digestion of milk, fermentation of milk with proteolytic starter cultures, and/or hydrolysis by proteolytic enzymes. Milk derived peptides exert a number of health beneficial activities, even upon oral administration. Bioactive peptides have a great impact on major body systems including the digestive, nervous, endocrine, cardiovascular, diabetes type II, obesity, and immune systems. Antimicrobial peptides are also an important ingredient of innate immunity, especially at mucosal surfaces such as lungs and small intestine that are constantly exposed to a range of potential pathogens. Therefore, it plays an important role in boosting natural immune protection by reducing the risk of chronic diseases. Bioactive peptides are considered as potent drugs with well-defined pharmacological residues and also used to formulate health-enhancing nutraceuticals.     

Psychobiotics: A new approach for treating mental illness?

Gut microbiomes may have a significant impact on mood and cognition, which is leading experts towards a new frontier in neuroscience. Studies have shown that increase in the amount of good bacteria in the gut can curb inflammation and cortisol level, reduces symptoms of depression and anxiety, lowers stress reactivity, improves memory and even lessens neuroticism and social anxiety. This shows that, probably the beneficial gut bacteria or probiotics function mechanistically as delivery vehicles for neuroactive compounds. Thus, a psychobiotic is a live organism, when ingested in adequate amounts, produces a health benefit in patients suffering from psychiatric illness. Study of these novel class of probiotics may open up the possibility of rearrangement of intestinal microbiota for effective management of various psychiatric disorders.     

Biogeochemical processes in ethanol stimulated uranium-contaminated subsurface sediments

A laboratory incubation experiment was conducted with uranium-contaminated subsurface sediment to assess the geochemical and microbial community response to ethanol amendment. A classical sequence of terminal electron-accepting processes (TEAPs) was observed in ethanol-amended slurries, with NO3- reduction, Fe(III) reduction, SO4(2-) reduction, and CH4 production proceeding in sequence until all of the added 13C-ethanol (9 mM) was consumed. Approximately 60% of the U(VI) content of the sediment was reduced during the period of Fe(III) reduction. No additional U(VI) reduction took place during the sulfate-reducing and methanogenic phases of the experiment Only gradual reduction of NO3-, and no reduction of U(VI), took place in ethanol-free slurries. Stimulation of additional Fe(III) or SO4(2-) reduction in the ethanol-amended slurries failed to promote further U(VI) reduction. Reverse transcribed 16S rRNA clone libraries revealed major increases in the abundance of organisms related to Dechloromonas, Geobacter, and Herbaspirillum in the ethanol-amended slurries. Phospholipid fatty acids (PLFAs) indicative of Geobacter showed a distinct increase in the amended slurries, and analysis of PLFA 13C/12C ratios confirmed the incorporation of ethanol into these PLFAs. A increase in the abundance of 13C-labeled PLFAs indicative of Desulfobacter, Desulfotomaculum, and Desulfovibrio took place during the brief period of sulfate reduction that followed the Fe(III) reduction phase. Our results show that major redox processes in ethanol-amended sediments can be reliably interpreted in terms of standard conceptual models of TEAPs in sediments. However, the redox speciation of uranium is complex and cannot be explained based on simplified thermodynamic considerations.     

Sustainable biocarbon as an alternative of traditional fillers for poly(butylene terephthalate)-based composites: Thermo-oxidative aging and durability

Sustainable biocomposites have gained considerable interest as an alternative to conventional composites in recent years due to their cost-effectiveness and environmental friendliness. The aim of this study was to investigate the performance and durability behavior of biocomposites from sustainable biocarbon (BC) as compared to conventional established fillers. The poly(butylene terephthalate) (PBT) and its composites reinforced with BC, talc, and glass fiber (GF) were prepared and the durability performances was investigated. The study showed that BC/PBT biocomposites provided a lighter weight alternative to traditionally used fillers. After undergoes thermo-oxidative aging, the mechanical properties of BC/PBT biocomposite were deteriorated. The GF/PBT showed the most stable in retaining its mechanical properties in comparison to the talc/PBT and BC/PBT. The aging behavior and mechanism of the PBT composites were discussed. This study provides further insight on the durability-related properties progression of biocomposites as compared to traditional used fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47722.     

Processable high Tg high strength fluorinated new poly(arylene ether)s containing imido aryl group

A series of poly(arylene ether)s ( 7a–7f ) were successfully synthesized by aromatic nucleophilic substitution reactions of imidoaryl biphenol (5), 4,9‐bis‐(4‐hydroxy‐phenyl)‐2‐phenyl‐benzo[f]isoindole‐1,3‐dione with six different trifluoromethyl substituted bisfluoro monomers ( 6a–6f ). The weight‐average molar masses of the polymers were up to 280 kD as measured by GPC. These poly(arylene ether)s exhibited glass transition temperatures up to 361°C in DSC. These polymers showed very high thermal stability up to 558°C for 10% weight loss under synthetic air in TGA. Except 7d–7f, remaining polymers 7a–7c were soluble in a wide range of organic solvents. Transparent thin films of these polymers cast from DCM or NMP exhibited tensile strengths up to 75 MPa and elongation at break up to 41% depending on their exact repeating unit structures. These poly(arylene ether)s showed cut‐off wavelength in between 400 and 450 nm except 7d and water absorption were in the range of 0.4 to 0.6%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Characterization of Friction-Surfaced SS316 Overlaid on Medium-Carbon Steel

In this paper, a study has been done on the solid-state coating of SS316 over medium-carbon steel EN8. The objective is to determine the characterization of friction-surfaced joints with process parameters such as axial load, traverse speed and rotational speed. Coating thickness and coating width depend on the traverse and rotational speeds, which decrease with the increase in axial load. A maximum bending strength of 134 MPa was obtained for the sample with highest axial load of 9 kN, rotational speed of 1600 rpm and traverse speed of 2.2 mm/s. The XRD peaks of SS316-coated EN08 sample show a considerable shift, indicating martensite (α ^′) formation. It has been observed that strong bonding could be obtained under specific conditions, as the substrate bonding materials are metallurgically inconsistent and have a tendency to form brittle compounds. External degradation occurred when the specimen was exposed to elevated temperatures. The results were analyzed statistically. To access its potential application corrosion studies were carried out, which shows SS316 overlaid EN8 exhibits better corrosion resistance than the substrate EN8 sample.     

Mechanical,thermal and dynamic‐mechanical behavior of banana fiber reinforced polypropylene nanocomposites

Natural fiber‐reinforced nanocomposites based on polypropylene/nanoclay/banana fibers were fabricated by melt mixing in a twin‐screw extruder followed by compression molding in this current study. Maleic anhydride polypropylene copolymer (MA‐g‐PP) was used as a compatibilizer to increase the compatibility between the PP matrix, clay, and banana fiber to enhance exfoliation of organoclay and dispersion of fibers into the polymer matrix. Variation in mechanical, thermal, and physico‐mechanical properties with the addition of banana fiber into the PP nanocomposites was investigated. It was observed that 3 wt% of nanoclay and 5 wt% of MA‐g‐PP within PP matrix resulted in an increase in tensile and flexural strength by 41.3% and 45.6% as compared with virgin PP. Further, incorporation of 30 wt% banana fiber in PP nanocomposites system increases the tensile and flexural strength to the tune of 27.1% and 15.8%, respectively. The morphology of fiber reinforced PP nanocomposites has been examined by using scanning electron microscopy and transmission electron microscopy. Significant enhancement in the thermal stability of nanocomposites was also observed due to the presence of nanoclay under thermogravimetric analysis. Dynamic mechanical analysis tests revealed an increase in storage modulus (E′) and damping factor (tan δ), conforming the strong interaction between nanoclay/banana fiberand MA‐g‐PP in the fiber‐reinforced nanocomposites systems. POLYM. COMPOS., © 2011 Society of Plastics Engineers.     

Effect of Maleated Compatibilizer on Performance of PLA/Wheat Straw‐Based Green Composites

In this study, the use of PLA‐g‐MA is investigated as a potential method for improving interfacial adhesion between agricultural residues and PLA, with the goal of enhancing mechanical properties. Compatibilization was achieved by using PLA‐g‐MA prepared via reactive extrusion. Green renewable and compatibilized PLA/wheat straw composites were extruded and injection‐molded. Addition of 3 and 5 phr PLA‐g‐MA to the composites resulted in significant improvements in tensile strength (20%) and flexural strength (14%) of the composites, matching that of the neat polymer. The observed improvement in strength was attributed to the good interfacial adhesion between the fiber and matrix.

     

The Effects of Process Engineering on the Performance of PLA and PHBV Blends

The effects of process engineering in the fabrication of PHBV, PLA and their blends prepared by melt blending are studied. The elongation of an optimized blend can be improved by 148 and 250% over the virgin PHBV and PLA polymers, respectively. DSC shows that the two polymers are immiscible in blends of any composition. The crystallinity of PHBV is hindered by the presence of PLA. UV‐Vis demonstrates the opacity of the blend with incorporation of PHBV to the PLA phase. The observed tensile modulus of the optimized sample is compared with theoretical values from the rule of mixtures. Gordon‐Taylor's equation is applied on the glass transition temperatures for theoretical modeling to explain the miscibility of the polymers.