新的钢化技术及检验方法

近期有几个因素影响到玻璃钢化领域,不仅钢化工艺本身是推动钢化工业的主要因素,其它因素比如钢化市场的参与者们正面临着日益上升的全球化的竞争;客户需要高质量的产品和安全装配规则,新发明的非破坏性检验方法正代替成本较高的老方法;市场上满足汽车及建筑工业要求的新产品;最后钢化设备制造商所生产的满足于新玻璃产品的热处理要求的新产品。对这些问题全面进行了讨论以便为今天的钢化技术提供一个完整的画面。同时也对使用新钢化技术使钢化工业有更辉煌的明天提出了一些建议。     

Determination of flexibility of beam-to-column connectors used in thin walled cold-formed steel pallet racking systems

This paper describes a new test to determine flexibility of beam-to-column connectors used in conventional pallet racking systems. In this study, two different ways were used to find the flexibility of a connector. The connector developed was tested using the conventional cantilever method [Bajoria, KM. Three dimensional progressive collapse of warehouse racking, PhD Thesis, University of Cambridge, UK 1986], and then also using a newly proposed double cantilever method. To verify the results obtained from both the tests, a full scale frame test was carried out. In the double cantilever test the connector is subjected to three types of forces namely moment, shear and the axial pull by the beams, thereby giving behavior close to practical usage of connectors. Non-linear finite element analysis of both the tests and also of the full scale test were carried out using ANSYS [ANSYS 7.0—User's Manual, ANSYS Inc., 2005] software. The results obtained from the double cantilever test were found to match well with the full scale frame test. The experimental results and the finite element results are compared in this paper.     

Aggregate and concrete microfracture

Thin sections cut from cast concrete cylinders have been examined in transmitted light to investigate the significance of coarse aggregate type in “primary” microfracturing. Concretes manufactured with crushed-rock aggregates and gravel aggregates were studied and, in every case, the dominant fracture type was a parting of the aggregate-matrix bond. Bond cracking was least severe with the marble aggregate where epitaxial calcite over-growth was indicated. The ability of bond cracks to maintain continuity by bridging surface irregularities, via mortar cracks, reduced the inhibiting influence of rough-surfaced aggregate on bond-crack development.     

Cigarette characteristics,smoker characteristics,and the relationship to cigarette fires

Data were collected from eight cities on a wide range of cigarette and smoker characteristics for a sample of smokers. Of these, 564 smokers had had fires and were identified through fire department response to those fires, while the other 1,611 smokers had not had fires and were identified through a telephone sample survey of the communities. The characteristics analyzed included those that had shown evidence of a relationship to the risk of a cigarette-initiated fire, either in laboratory studies or in previous statistical analyses of fire experience.The smoker characteristics analyzed were household income, education, age, gender, and race. The cigarette characteristics analyzed were filter, tobacco column length, filter length, circumference, density, amount of tobacco, menthol, citrate, porosity, and pack type. In addition, a variable was used to control for the smoker's city.After controlling for all smoker characteristics and city, logistic regression modeling showed four cigarette characteristics to be significant: filter, filter length, porosity, and type of pack. Filter, filter length, and porosity all affect air intake, which, therefore, appears to be an important physical element in the combustion process associated with risk. Analysis limited to filtered cigarettes only showed the same characteristics to be significant, plus tobacco column length. Extension of the analysis to two-way interaction terms did not change any of the conclusions on which cigarette characteristics are important, but it did indicate that the role of pack type was different for men and women.Sensitivity analyses, shown in the appendix, supported the main conclusions that cigarette characteristics are significant after controlling for smoker characteristics and that the four specific cigarette characteristics—filter, filter length, porosity, and pack—are the ones that are significant. These analyses checked the impact of cluster sampling, sensitivity to missing data on smoker characteristics, and sensitivity to nonfire smoker cases with responses by people other than the smokers themselves.All this means that there are already cigarettes commercially available that exhibit a reduced propensity for ignition when one controls for smoker characteristics.This report was originally written as the final report in June 1993 as part of CPSC-P-91-1147 Contract Cigarette Fire Incident Study that the National Fire Protection Association conducted for the U.S. Consumer Product Safety Commission.Harwood, formerly with the Consumer Product Safety Commission, is retired.     

Paleonutritional analysis of the pre-Hispanic population from Fuerteventura (Canary Islands)

In this study, from histological and chemical perspectives, we analyse the human remains belonging to the pre-Hispanic inhabitants from Fuerteventura (one of the Canary Islands) and compare the results with those obtained on a sample of pre-Hispanic inhabitants from Gran Canaria (Canary Islands). We observe that trabecular bone mass was normal in the samples from Fuerteventura except for an elderly woman; this result is in sharp contrast with the decreased bone mass observed in the population from Gran Canaria. The pre-Hispanic population from Fuerteventura showed lower bone strontium, Sr/Ca ratio, and bone barium, but slightly higher bone copper, than that from Gran Canaria. All these data indicate a greater consumption of marine products by the population of Fuerteventura. The high prevalence of osteoporosis observed in the population from Gran Canaria may be interpreted as a consequence of protein-calorie malnutrition, a condition which seemed to be not so prevalent in the population of Fuerteventura.     

Interstitial inorganic phosphorus concentrations in lakes Mendota and Wingra

Interstitial P levels in Lake Mendota and Lake Wingra were evaluated as a function of season and water column and sediment depth. Interstitial water was obtained by the centrifugation-filtration method. Temporal variations were observed over the entire 15 cm sediment depth interval examined in all four locations evaluated. Interstitial reactive P (IRP) levels in Lake Mendota ranged from 0.014–1.67 mg l⁻¹ at the 5–6 m water column depth and from 1.20–5.75 mg l⁻¹ at the 18–19.5 m depth. IRP levels in Lake Wingra ranged from 0.029–2.15 mg l⁻¹ at 3.5 m and from 0.191–3.96 mg l⁻¹ at 2 m. Variations in interstitial P were attributed to variations in oxidation state of Fe as influenced by oxygen transport and reduction rates.     

Oscillations of Foundations Installed on the Ground and Cast-in-Place Piles Subject to Kinematic Effects

Results are presented for experimental investigations on the traffic-induced oscillations of two full-scale foundations of a metallic tunnel, one of which is installed directly on the ground, and the other on cast-in-place piles. The foundations are close to one another with respect to mass and the load applied to them. Differences are revealed between the parameters of the actual oscillations of these foundations and their computed values.     

Features of disinfection kinetics of water containing <Emphasis Type="Italic">Escherichia Coli</Emphasis> in conditions of hydrodynamic cavitation

The paper has investigated the disinfecting effect of hydrodynamic cavitation on the microorganisms of E. coli in water. It has been found that disinfection kinetics depend on the intensity of the hydrodynamic cavitation field, the microbial load, and gas content. We have studied structure and morphology variation of the E. coli bacteria. It has been demonstrated that the antimicrobial effect is achieved owing to the physicochemical effects of the cavitation field, under whose influence there occurs mechanical destruction of cells and chemical disinfection by the radicals of hydroxyl and hydrogen peroxide.     

Upgrading the Activated-Sludge Process for Total Nitrogen Removal in Hong Kong

In order to protect the sensitive waters in Tolo harbour (Hong Kong), Sha Tin and Tai Po sewage-treatment works were first designed to remove 70% of the nitrogen load from the sewage. Since then, due to continuing serious eutrophication problems in the harbour, both plants have been modified to increase the removal efficiency to 90%.
The modifications were based on the Bardenpho process. However, the designers of the two plants adopted different approaches to process intensity, complexity and control of bacterial foam. At Sha Tin, the average monthly results have shown an increase of total nitrogen removal from 60–70% to about 80% since its completion. The addition of methanol was found to be ineffective on further enhancement of the denitrification rate due to difficulties in the apportioning of the second anoxic zone. The overall monthly results for Tai Po have also shown an increase in the removal rate to about 80%, even though 90% was achieved for a short period of time. The major problem encountered at the latter plant was that the process design did not provide an effective control on bacterial foaming, which had affected the smooth operation of the process.     

铝酸钙水泥、硅酸盐水泥和β-半水石膏混合物中钙矾石的膨胀性能

本文利用现场同步加速X-射线衍射、等温量热仪和膨胀测量等手段,研究了在20℃,100%相对湿度下,由25%(重量比)的铝酸钙水泥、12.5%的硅酸盐水泥、12.5%的β-半水石膏和50%的水组成的浆体的水化。水化伊始,首先形成了石膏和钙矾石,同时半水石膏也相应消耗(0-45min内)。随后石膏继续消耗,钙矾石持续形成,2h45min后石膏消耗完毕,铝酸盐-AFm开始形成,同时钙矾石的数量在7h内保持不变。热曲线的第一个峰源自机械搅拌、初始润湿和溶解,还有钙矾石和石膏的形成,第二个峰为石膏被钙矾石所替代,第三个对应于铝酸盐-AFm的形成。石膏被钙矾石替代伴随着0.7%平均线性膨胀。