Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis

Theoretical and experimetal methods have been developed to characterize the effect of mechanical loading on the mesoscopic and macroscopic mechanical state of polycrystalline materials. Ferritic and austenitic single-phase materials were first analyzed, then phase interaction was studied in a multiductile phase material (austeno-ferritic duplex steel) and a natural reinforced composite (pearlitic steel). The theoretical method is based on the self-consistent approach in which elastic and plastic characteristics of the phases have been applied through the micromechanical behavior of single-crystal-using slip systems and microscopic hardening. The effects of a crystallographic texture and phase interaction during loading and after unloading were studied. The elastic and plastic anisotropy of the grains having the same crystallographic orientation were assessed by diffraction strain analysis. The simulation was compared with the experiments performed using the X-ray diffraction technique. In the considered duplex and pearlitic steels, it was observed that the ferrite stress state is much lower than the austenite and cementite ones. The results of diffraction strain distribution have showed the pertinence of the models and give valuable information, for example, for the yield stress and the hardening parameters of each phase in a two-phase material.     

Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718

Notches were machined in specimens of INCONEL 718 by a broaching process, where differing broaching runs led to differing extents of subsurface deformation and surface roughness. Fatigue tests were carried out at 600 °C with a trapezoidal loading waveform at 0.25 Hz. The broaching process that led to the more severe subsurface deformation (but lower surface roughness) showed the worst fatigue performance. Analysis of total strain amplitude in the notch root with the aid of an elastoplastic finite-element (FE) model showed that the work hardening related to the subsurface deformation caused by the different broaching can account for the difference in fatigue lives. Differences in initiation and growth behavior were seen for the two broached finishes as well as for broached and subsequently polished samples. These differences are discussed in terms of a change in crack growth initiation and growth mechanisms due to the presence of the work-hardened layer.     

Interfacial hybridization kinetics of oligonucleotides immobilized onto fused silica surfaces

Fused silica optical fibers have been used in an intrinsic mode optical configuration as biosensors for fluorescence based detection of hybridization of nucleic acids. In this work, the kinetics of hybridization of single-stranded oligonucleotides that were covalently immobilized were studied. The probe DNA was dT₂₀, and the target was Fluorescein-labeled non-complementary (dT₂₀) or complementary (dA₂₀) oligonucleotide. Chronofluorimetric monitoring of the adsorption and hybridization processes was used to investigate oligonucleotide films of different density, in different salt concentrations, at temperatures of 25 and 40 °C, with the concentration of the target DNA being 0.005–0.1 μM. Mathematical models based on first- and second-order Langmuir adsorption have been examined to describe both the adsorption and the hybridization processes. Experimental data were processed using the models, and the hybridization kinetics were calculated. Hybridization kinetics on these optical fiber DNA sensors was found to be up to three orders faster than results presented for a number of other experiments using different immobilization chemistries.     

Electron Thermalization in Metallic Islands Probed by Coulomb Blockade Thermometry

We describe a systematic series of experiments on thermalization of electrons in lithographic metallic thin films at millikelvin temperatures using Coulomb blockade thermometry (CBT). Joule dissipation due to biasing of the CBT sensor tends to drive the electron system into non-equilibrium. Under all experimental conditions tested, the electron-electron relaxation is fast enough to ensure thermal electron distribution, which is also in agreement with the theoretical arguments we present. On the other hand, poor electron-phonon relaxation plays a dominant role in lifting the electron temperature above that of the bath. From a comparison of the results with the theoretical current-voltage characteristics of the thermometers we precisely determine the electron-phonon coupling constant for the common metals used. Our experiments show that it is a formidable task to attain thermal equilibrium with the bath using single-electron devices under non-zero bias conditions at 20–50 mK temperatures that are typically encountered in experiments. The conclusion concerning Coulomb blockade thermometry is more optimistic and two-fold: (1) One can now correct the errors due to bias heating in a satisfactory manner based on known material properties and the size of the metal films in the sensor. (2) Reliable thermometry down to 20 mK requires islands whose volumes are >10^?15 m³, which is still acceptable both from the parameter (capacitance) and fabrication points of view.     

Low Temperature Acoustic Properties of Poly-Crystalline Aluminium

As in other structurally disordered solids, the low temperature acoustic properties of poly-crystalline aluminium are governed by atomic two-level tunneling systems. The particular temperature variation of sound velocity and internal friction depends on the dynamical behaviour of these tunneling systems, which is expected to be determined by interaction with thermal phonons and conduction electrons as in metallic glasses. In earlier measurements on aluminium-wires no significant difference was found whether the sample was superconducting or kept in the normal state by a sufficiently high magnetic field and the concluding claim was ‘absence of electron-assisted relaxation for tunneling systems in poly-crystalline metals’. In this report, vibrating reed measurements are presented of pure poly-crystalline Al with a special sample shape that reduces the influence of the clamping. We in fact find significant differences between the sample being normal conducting or superconducting. The overall behaviour indeed resembles very closely that of metallic glasses and clearly demonstrates that also in Al tunneling systems couple to conduction electrons as expected. As a quantitative result we may state that the density of states of tunneling systems in poly-crystalline Al is considerably smaller than in metallic glasses. PACS numbers: 61.43.-j, 62.65.+k, 63.50.+x     

Growth of β-FeSi2 layers deposited from a molten salt

β-FeSi₂ layers have been successfully grown using a molten salt method for the first time. It was found that single phase and homogeneous β-FeSi₂ layers with a columnar domain structure can be grown on FeSi substrates. The layer thickness was demonstrated to be controllable by the growth temperature and time, and was diffusion controlled. It was shown that the layers were void- and crack-free compared to similar layers grown on Fe substrates: this difference is explained in terms of Fe diffusion. This vacuum-free simple growth technique is useful for the fabrication of large area semiconductor devices at low cost.