电镀锌钢材表面物理气相沉积Zn-Mg合金镀层的电化学性能(英文)

锌合金镀层由于具有较强的耐腐蚀性能而得到广泛的关注,特别是Zn-Mg合金镀层,其耐腐蚀性能能得到显著提高。采用气相沉积方法制备不同镁含量的Zn-Mg合金镀层,研究Zn-Mg合金镀层中镁含量对其耐腐蚀性能的影响。在3%NaCl溶液中进行浸泡试验、动电位测试和电偶腐蚀试验,研究不同Mg含量镀层的耐腐蚀性能。结果表明,Zn-Mg合金镀层的耐腐蚀性能与Mg含量显著相关,镀层的腐蚀电位随着Mg含量的增加而降低,但是腐蚀电流密度却升高,直至15%Mg含量;在Zn-Mg合金镀层中存在钝化区。     

Study of residual stresses in tailor rolled blanked Al5J32-T4 sheets

Several automotive parts such as door panels have been manufactured by using load-adapted blanks for crash optimization and weight minimization.Recently, Tailor Rolled Blanks (TRB) has been introduced to remove the disadvantages of a welding process which was used in joining panel components.TRB offers better structural design capabilities due to the seamless transitions on the panels with different thicknesses.In spite of the advantages of the process, TRB leaves internal stresses in the panel.This residual stresses lower the formability of Tailor Rolled Blanked (TRBed) parts and cause cracks near severe curvature during subsequent forming processes.In this research, the residual stresses of TRBed Al5J32-T4 sheets were studied by X-ray stress analysis, and also microstructure was observed along the rolling direction.In addition, heat treatment was done after TRB process in order to compare the residual stresses to that of the TRBed sheets before the heat treatment.     

Computational study on influence of RF shielding box on inductance of coil

Despite the fact that a radio frequency (RF) shielding box affects a coil inductance used in matching network, RF engineers have used a coil inductance measured in open space on designing matching networks since it is difficult to precisely measure the coil inductance within the RF shielding box. In this work, we investigate the influences of the RF shielding box on the coil inductance via a 3D full electromagnetic wave simulation. Simulation results shows that the coil inductance decreases from -6.0% to -11.9% compared with its ideal inductance depending on coil positions within the RF shielding box. Both inductive and capacitive coupling between the coil and surfaces of the RF shielding box contribute to the reduction of the coil inductance. We expect that these results would be useful for those who design RF matching networks.     

Effects of honing treatment on AIP-TiN and TiAlN coated end-mill for high speed machining

The objective of this work is to compare the tool performance of TiN and TiAlN coated carbides end-mills deposited by an arc ion plating (AIP) method, using honing treatment to polish the cutting edge surface sleekly. The curve of surface roughness versus honing time showed a rapid improvement initially and thereafter became steady, manifesting a saturation effect. The optimal honing time related to surface roughness was determined to be approximately 20 s. As the surface roughness increased, the critical loads reduced. At an average surface roughness (Ra) of 0.028 μm, the highest critical loads of TiN and TiAlN coating layers were 98 and 114 N, respectively. Tool performances of uncoated and coated tools were conducted under high speed machining (HSM) of AISI D2 cold-worked die steel (62 HRC). Consequently, the TiAlN coated end-mill using honing treatment showed excellent tool life under HSM conditions.     

SCALE‐UP and FIELD TEST of the VACUUM/STEAM/VACUUM SURFACE INTERVENTION PROCESS FOR POULTRY1

The Vacuum/Steam/Vacuum surface intervention pilot plant processor was scaled up to a mobile unit that can be transported to close proximity of chicken processing plants. After several modifications to the mandrel that supports the broiler carcass in the treatment chamber to minimize mechanical damage, the unit was capable of 1.1 log cfu/mL kill of inoculated Listeria innocua and 1.4 log cfu/mL kill of inoculated E. coli K‐12. Field tests achieved 1.4 log kill of E. coli and 1.2 log kill of Campylobacter on freshly processed chicken using 3 cycles and 138C saturated steam. But, there was extensive mechanical damage. the mandrel was modified in the Eastern Regional Research Center pilot plant to eliminate the mechanical damage. With mechanical damage eliminated, the bacteria kill was 1.1–1.5 log of inoculated E. coli K‐12 with a total process time of 1.1 s.     

PURIFICATION AND CHARACTERIZATION OF BACILLUS SUBTILIS JM-3 PROTEASE FROM ANCHOVY SAUCE

Bacillus subtilis JM‐3 was isolated from anchovy sauce naturally fermented in an underground cellar at 15 ± 3C for 3 years. The activity of the B. subtilis protease was highest in the 40–60% ammonium sulfate fraction. The yield of the purified protease was 5.3%, and its purification ratio was 35.6 folds. The molecular weight of the B. subtilis protease was 17.1 kDa, and its K_m and V_maxvalues were 1.75 μg/mL and 318 μM 1/min, respectively. The optimal temperature for protease activity was 60C, but optimal stability temperature was 30C. The optimal pH for protease activity and stability was 5.5. Therefore, the B. subtilis JM‐3 protease was classified as an acid protease. The relative activities of the B. subtilis JM‐3 protease were 69, 21 and 1.3% at 10, 20 and 30% NaCl concentrations, respectively. The best substrate for the B. subtilis JM‐3 protease was benzyloxycarbonyl‐glycine‐p‐nitrophenyl ester followed by bovine serum albumin. p‐Toluene‐sulfonyl‐L‐lysine chloromethylketone was the strongest inhibitor followed by soybean trypsin inhibitor, but N‐ethylmaleimide did not inhibit this enzyme. The B. subtilis JM‐3 protease was therefore presumed to be a trypsin‐like serine protease.     

纳米SiO2与尿素修饰大豆7S与11S球蛋白胶黏特性的研究

以大豆7S和11S球蛋白为研究对象,采用纳米二氧化硅(SiO2)对其进行分子修饰,添加量分别为蛋白基料的0.5%、1.0%、1.5%,然后用1、3、5 mol/L尿素控制变性相结合的方法来提高7S与11S球蛋白在3种木材(水曲柳、樱桃木、松木)上的胶黏强度。结果表明,经纳米SiO2修饰后,大豆7S和11S球蛋白的胶黏强度明显增大,最佳添加量为1%;当浓度为1 mol/L的尿素与1%的纳米SiO2共同修饰7S和11S球蛋白后,其胶黏强度最大。同时采用差示扫描量热仪测定了大豆球蛋白修饰前后的焓变,并探讨了胶黏作用增强的可能机理。     

纤维长度和粗度对纸张结构性能的影响

研究了各种未打浆纸浆的纤维直径、长度与粗度的关系,并探讨了纤维长度与粗度对成纸性能的影响。结果表明,纤维的直径、长度与粗度成线性关系;且纤维长度与粗度均对成纸的吸水性、气孔率与气孔有效直径有增强作用。     

Treatment of Bone Waste Using Thermal Plasma Technology

Daily meat consumption produces a lot of bone waste, and dumped bone waste without treatment would result in environmental hazards. Conventional treatment methods of waste bones have some disadvantages. Herein, an investigation of bone waste treated using thermal plasma technology is presented. A high-temperature plasma torch operated at 25.2 kW was used to treat bone waste for seven minutes. The bone waste was finally changed into vitric matter and lost 2/3 of its weight after the treatment. The process was highly efficient, economical, convenient, and fuel-free. This method could be used as an alternative for disposal of bone waste, small infectious animals, hazardous hospital waste, etc.