The effect of Pseudomonas aeruginosa infection on clinical parameters in steady-state bronchiectasis

STUDY OBJECTIVE: To investigate the effect of Pseudomonas aeruginosa infection on clinical parameters in Chinese patients with noncystic fibrosis and steady-state bronchiectasis. DESIGN: Prospective, cross-sectional clinicomicrobiological study with informed consent. SETTING: Consecutive outpatient recruitment from a specialist bronchiectasis respiratory clinic. PATIENTS: Outpatients (n = 100; 62 women; 55.1+/-16.7 years old; FEV1/FVC 1.4+/-0.7/2.1+/-0.9 L), who had stable respiratory symptoms for more than 3 weeks. MEASUREMENTS AND RESULTS: Respiratory pathogens isolated from the sputum were: Pseudomonas aeruginosa (33), Haemophilus influenzae (10), Moraxella catarrhalis (2), other Gram-negative bacilli (5), Streptococcus pneumoniae (6), Staphylococcus aureus (5), mycobacteria (3), and yeast (1). Clinical parameters in patients with positive isolation of P aeruginosa were compared with those without the organism in the sputum culture (non-P aeruginosa). In the P aeruginosa group, the FEV1/FVC ratio and sputum volume were lower (p < 0.005) and higher (p < 0.0001), respectively, than those of the non-P aeruginosa group. The FEV1/FVC ratio (< 60%) and sputum volume (grading > 5) were independently associated with a positive sputum isolation of P aeruginosa with odds ratios of 3.1 (confidence interval [CI] 1.2 to 8.4; p < 0.01) and 4.7 (CI 1.6 to 13.3; p < 0.001), respectively. CONCLUSIONS: P aeruginosa is the predominant respiratory pathogen isolated in the sputum of Chinese patients with steady-state bronchiectasis, and its isolation is associated with high sputum output (> or = 75th quartile) and moderately severe airflow obstruction (FEV1/FVC < 60%).     

RNA-binding activity of the E1B 55-kilodalton protein from human adenovirus type 5

The human adenovirus 5 E1B 55-kDa protein is required for efficient nucleocytoplasmic transport of late viral mRNAs. This protein is shown to have RNA-binding activity which maps to a region of the protein with homology to a family of RNA-binding proteins and which has been shown previously to be essential for functionality of the protein in vivo.     

Establishment of human parotid pleomorphic adenoma cells in culture: morphological and biochemical characterization

This study reports the establishment of alpha-amylase-producing human parotid pleomorphic adenoma cell lines (2HP and 2HP1) which have been maintained in culture for over 1 yr. The procedures required preparation of cellular clumps from tumor tissue and plating them on plasma clot or precoated dishes. During the initial phase of growth they required modified MCDB-153 medium without serum. When cells showed signs of degeneration they were changed to MCDB-153 medium containing first 2% and then 10% heat inactivated fetal bovine serum. Although cells grew well in MCDB-153 containing 10% serum, the epithelial cell morphology was not distinct. Therefore, the growth and morphology of cells grown in MCDB-10% serum were compared with those in RPMI growth medium containing 10% fetal bovine serum and F12 containing 10% agammaglobulin newborn bovine serum. Although the growth of cells was a little slower in F12 medium than those in MCDB and RPMI, the epithelial cell morphology was maintained better than in other growth media. The cells of 2HP and 2HP1 produce low levels of alpha-amylase and relatively high levels of alpha-amylase mRNAs of 1176 and 702 bp and contain neurofilament-160, a neuronal-specific marker. The cells of 2HP1 are tumorigenic when tested in athymic mice, but the cells of 2HP are not. The establishment of amylase-producing human parotid adenoma cell lines of different characteristics in culture provides a new opportunity to study the mechanisms of differentiation and transformation, and regulation of alpha-amylase in these cells.     

The Bivariate Transmuted Family of Distributions: Theory and Applications

The bivariate distributions are useful in simultaneous modeling of two random variables. These distributions provide a way to model models. The bivariate families of distributions are not much widely explored and in this article a new family of bivariate distributions is proposed. The new family will extend the univariate transmuted family of distributions and will be helpful in modeling complex joint phenomenon. Statistical properties of the new family of distributions are explored which include marginal and conditional distributions, conditional moments, product and ratio moments, bivariate reliability and bivariate hazard rate functions. The maximum likelihood estimation (MLE) for parameters of the family is also carried out. The proposed bivariate family of distributions is studied for the Weibull baseline distributions giving rise to bivariate transmuted Weibull (BTW) distribution. The new bivariate transmuted Weibull distribution is explored in detail. Statistical properties of the new BTW distribution are studied which include the marginal and conditional distributions, product, ratio and conditional momenst. The hazard rate function of the BTW distribution is obtained. Parameter estimation of the BTW distribution is also done. Finally, real data application of the BTW distribution is given. It is observed that the proposed BTW distribution is a suitable fit for the data used.     

Fabrication of a novel latex-based membrane for oily wastewater filtration: effect of degassing on the properties of membrane

Iranian Polymer Journal - Nitrile butadiene rubber latex/graphene oxide (NBR/GO) membranes were fabricated by latex compounding and curing method. This was a new method to produce membrane, thus,...     

Depolymerization of Turkish lignites. I. Effect of substituted phenols

A lignite (C, 67.4 wt%) was depolymerized with phenol, p-nitrophenol and o-chlorophenol using sulphuric acid as catalyst. The solubility of the lignite was enhanced by these treatments, with phenol being the most reactive reagent whereas p-nitrophenol was the least reactive. The distribution of nitro- and chloro-groups in the solubilized products was investigated by infrared spectrometry and it was found that these groups were redistributed among the pyridine- and methanol-soluble materials. It is suggested that benzene-soluble material is produced by self-depolymerization of coal or by degradation of pyridine- and methanol-soluble material.     

Effect of Zn and Pb as alloying elements on the electrochemical behavior of brass in NaCl solutions

The electrochemical behavior of brasses with various Zn content (5.5–38 mass%) and brass (Cu–38Zn) with different Pb contents (1–3.4 mass%) in 0.6 M NaCl was investigated. The effects of temperature, immersion time, and concentration of chloride ions on the behavior of the different alloys were studied. The pitting corrosion behavior of Cu–Zn alloys and leaded–brass alloys in 0.6 M NaCl solution was also investigated. Open-circuit potential measurements (OCP), polarization techniques and electrochemical impedance spectroscopy (EIS) were used. The results show that the increase in the Zn content increases the corrosion rate of the brass alloys in chloride solutions, while the increase of Pb content in Cu–38Zn–Pb decreases the corrosion rate of the alloy. Long immersion time of the alloys in the aqueous electrolyte improves their stability due to the formation of passive film on the alloy surface. The breakdown potential is shifted to more negative direction with increasing the Zn content, whereas it shifts towards positive values with increasing Pb content. Equivalent circuit model for the electrode/electrolyte interface under different conditions was proposed to illustrate the electrochemical processes taking place at the interface. The electrochemical behavior of the different alloys was discussed in view of the fitting results.     

Extraction of metals from sulphides using sulphur trioxide in fluidised bed

The kinetics of the reaction of chalcopyrite, iron sulphide, copper sulphide, and nickel sulphide with sulphur trioxide gas were studied using a fluidised bed technique. O₂, N₂, or air was used as a carrier gas for the sulphur trioxide in fluidisation. Binary mixtures of finely ground (0.37–75 μm) samples were reacted with the sulphur trioxide in a Pyrex column at 373–673 K. The reaction products were leached with water and the soluble metals in the solution were determined by atomic absorption spectrometry. The total soluble reaction products were determined gravimetrically. The results obtained showed that a higher yield of soluble salts was obtained when O₂ or air was used as a carrier gas for sulphur trioxide than when an inert gas was used. Higher yields of soluble salts were obtained when the samples were most finely ground. Increase of copper sulphide content in binary mixtures with iron or nickel sulphide led to an increase in the yield of soluble salts. For iron sulphide/nickel sulphide mixtures, the yield of soluble salts increased with the nickel sulphide content. There were maximum values for the soluble metal ratios Ni/Fe and Cu/Ni in the corresponding sulphide binary mixtures and this maximum was at about 50% weight. The soluble Cu/Fe ratio increased with copper sulphide content in mixtures with iron sulphide.     

Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Wear of graphite anodes during electrolysis of add sulphate solutions

Graphite electrodes were prepared by mixing calcined coke and coal tar pitch. They were pressed under 250 kg cm^–2 and heat treated up to 2800° C. Rectangles measuring 70 mm x 40 mm x 8 mm were anodically polarized under galvanostatic and potentiostatic conditions. Electrolyses were conducted at 10–50 mA cm^–2 for periods ranging from 10–120 hours in Na₂SO₄ solutions acidified with sulphuric acid to various pH values. The wear of graphite anodes increased with decreasing bath temperature, increasing acid concentration, decreasing pH of the electrolyte and increasing current density. A model is suggested which assumes that corrosion takes place via the formation of a lamellar crystal compound with the formula (C ₈ ⁰ O)(OH)₃HSO ₄ ^– ·2H₂SO₄.The compound is unstable at higher temperatures when corrosion is effected by oxidation of graphite by atomic oxygen. The formation of the carbon ions was found to be a necessary precondition for the formation of the complex.