紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

热熔凝聚法加工农药悬浮剂研究

介绍了采用热熔凝聚法对加工二氯喹磷酸、氟虫睛、乙霉威悬浮剂的试验结果，并测定了制剂的粒度分布、冷贮、热贮稳定性等理化性质。该法工艺简单、加工方便、节省能源、工业上切实可行。     

胶层厚度对拉伸试样应力分布影响的数值分析

运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。     

办公自动化进程中的信息保密技术的研究

随着办公自动化的推行,网络信息的保密问题亟待解决,文章提出了一种从物理层解决信息保密问题的方法,并给出设计的主要步骤,指出此种方式的优势所在,市场前景广阔,具有良好的可开发性。     

基于模型缩聚的θ指标损伤识别方法

为实现大型三维空间结构的损伤检测,提出了一种基于模型缩聚技术的检测方法。该方法利用有限数量的加速度传感器,得到大型三维桁架结构的自振频率和模态振型,以完成损伤的识别。数值仿真结果表明：该方法在损伤的定位识别和定量识别上能达到预期的适用性和可靠性。     

Electrochemical and microstructural characterization of cyclic redox behaviour of SOFC anodes

The oxidation of Ni to NiO in solid oxide fuel cell (SOFC) anode will result in large bulk volume change, which may change the interfaces of the two phases in the anode cermet and thus may cause significant performance degradation. The reduction and oxidation (redox) of the Ni/YSZ cermet were studied at 800 ℃. Anodic polarization measurements were performed before and after redox cycles. The anode current density at an overpotential of 100 mV kept decreasing during the whole redox treatment. It decreased from 19.11 to 7.95 mA·cm-2 after two redox cycles. Anode supported unit cell was assembled for cell's discharge measurements. Cell performance declined after each redox cycle. The maximum power density decreased from 126.28 to 40.32 mW·cm-2 . The microstructural changes after redox cycling were recorded using scanning electron microscopy (SEM). The results reveal that after re-oxidation, the Ni gets coarse and has a higher porosity; the nickel network structure turns to be desultory.     

TYPHOON PROCESS AND ITS IMPACT ON THE SURFACE CIRCULATION IN THE NORTHERN SOUTH CHINA SEA

A severe typhoon Utor,occurring between July 3 and 8,2001,brought heavy rainfall,strong wind and storm surge.Utor was responsible for tremendous destruction and economic losses in Philippines,Taiwan and Guangdong.An air-sea model system (MM5 and Princeton Ocean Model(POM))was built to simulate meteorological dynamics and ocean circulation in the South China Sea(SCS).In the POM the output of MM5 was used as the input data.With an increased number of vertical levels,a high-resolution planetary boundary layer scheme and updated landuse/vegetation data,the accuracy of computing wind,temperature and other meteorological fields are improved in near surface and upper levels in MM5 simulations.The simulated trajectory and wind speed of Utor are close to the observed results.The simulated distribution of rainfall is accorded well with measured data in the Pearl River Delta(PRD)area.At different meteorological stations in Hong Kong,the wind,temperature and sea surface pressure are well simulated.The simulated ocean surface current and surface temperature fields have an obvious rightward-biased response to the typhoon Utor,and the maximum velocity and the lowest temperature region appear in the 30 km of the right side of the typhoon track.The typhoon Utor could make the water 50m under the surface ocean unwell to surface and the ocean surface temperature decrease by about 2°C.     

基于添加人工数据的高差异性聚类集体生成方法

集体差异性被认为是集成学习中的一个关键因素,在聚类集成的研究中,生成聚类集体的方法有许多种,但就专门致力于生成高差异性聚类集体的方法研究较少,基于此,本文提出生成高差异性聚类集体的方法CEAN和ICEAN,在算法中通过引入人工数据来增加聚类集体的差异性,用实验比较了CEAN和ICEAN与文献中出现的常用聚类集体生成方法,实验表明CEAN和ICEAN确实能增加生成集体的差异性,从而在相似平均集体成员准确度情况下使得聚类集成的效果更好.     

基于AR技术的光交箱资源校准技术

光交箱端口状态对通信网络的正常运行具有重要作用,由于光交箱内部布线杂乱,容易对端口产生排线遮挡问题,导致传统的光交箱端口图像识别操作不便。文中提出了一种基于AR技术的光交箱资源校准技术,该技术可以对实时视频自适应选取关键帧,然后对关键帧进行光交箱端口状态和文字识别,最后返回加权融合后的识别结果,并利用实时AR交互指引巡检人员处理被遮挡端口,这不仅能提升巡检人员的工作效率,还能提高实时识别准确率。将该校准技术应用到光交箱端口的智能检测中,能对光交箱的端口识别提供极大便利。     

考虑电网阻抗耦合的模块化多电平换流器交直流侧阻抗通用计算方法

以模块化多电平换流器(modular multilevel converter,MMC)为技术路线的柔性直流输电技术在风电接入、电网异步互联等领域迅速发展。MMC的阻抗建模是分析柔性直流输电系统振荡起源的重要依据。文中分析MMC在交、直流侧激励下的谐波传递机制,建立一种适用于交、直流侧阻抗计算的通用方法。对一次系统频域建模关联了MMC所连接的交、直流侧网络阻抗,并考虑包含解耦双同步参考坐标系锁相环及负序内环控制在内的全部控制模块。通过求解线性方程组对MMC阻抗进行计算,并在PSCAD/EMTDC环境中对双端背靠背MMC系统在多种工况下1～5kHz频段内进行扫频,验证该方法的准确性,并详细分析网络阻抗耦合、控制链路延时、功率等级、负序内环和外环控制等因素对MMC阻抗的影响。