Structural Refinement and Photoluminescence Properties of MnWO4 Nanorods Obtained by Microwave-Hydrothermal Synthesis

Manganese tungstate (MnWO₄) nanorods were prepared at room temperature by the co-precipitation method and synthesized after processing in a microwave-hydrothermal (MH) system at 140 °C for 6–96 min. These nanorods were structurally characterized by X-ray diffraction (XRD), Rietveld refinements and Fourier transform (FT)-Raman spectroscopy. The growth direction, shape and average size distribution of nanorods were observed by means of transmission electron microscopy (TEM) and high resolution TEM (HR-TEM). The optical properties of the nanorods were investigated by ultraviolet visible (UV-vis) absorption and photoluminescence (PL) measurements. XRD patterns, Rietveld refinement data and FT-Raman spectroscopy indicate that the MnWO₄ precipitate is not a single phase structure while the nanorods synthesized by MH processing have a wolframite-type monoclinic structure without deleterious phases. FT-Raman spectra exhibited the presence of 17 Raman-active modes from 50 to 1,000 cm⁻¹. TEM and HR-TEM micrographs indicated that the nanorods are aggregated due to surface energy by Van der Waals forces and grow along the [100] direction. UV–vis absorption measurements confirmed non-linear values for the optical band gap (from 3.2 to 2.72 eV), which increased as the MH processing time increased. The structural characterizations indicated that the presence of defects in the MnWO₄ precipitate promotes a significant contribution to maximum PL emission, while MnWO₄ nanorods obtained by MH processing decrease the PL emission due to the reduction of defects in the lattice.     

Centering of organic-inorganic hybrid liposomal cerasomes in electrospun gelatin nanofibers

A study investigating the embedding of stabilized organic-inorganic liposomal cerasomes in gelatin nanofibers through the electrospinning of cerasome-dispersed gelatin aqueous solution is presented. Fluorescent and transmission electron microscopy confirm the embedding and centering of cerasomes in the electrospun nanofibers. A simple mechanism is proposed for the centering of cerasomes in gelatin nanofibers. The ability to incorporate cerasomes capable of encapsulating a variety of bioactive molecules provides a promising method to functionalize polymer nanofibers.     

Preliminary Characterization of Novel Extra-cellular Lipase from Penicillium crustosum Under Solid-State Fermentation and its Potential Application for Triglycerides Hydrolysis

Current studies about lipase production involve the use of agro-industrial residues and newly isolated microorganisms aimed at increasing economic attractiveness of the process. Based on these aspects, the main objective of this work is to perform the partial characterization of enzymatic extracts produced by a newly isolated Penicillium crustosum in solid-state fermentation. Lipase extract presented optimal temperature and pH of 37?°C and 9?C10, respectively. The concentrated enzymatic extract showed more stability at 25?°C and pH?7. The enzymes kept 100% of their enzymatic activity until 60?days of storage at 4 and ?10?°C. The stability under calcium salts indicated that the hydrolytic activity presented decay with the increase of calcium concentration. The specificity under several substrates indicated good enzyme activities in triglycerides from C4 to C18.     

Development of thermally conductive polymer matrix composites by foaming‐assisted networking of micron‐ and submicron‐scale hexagonal boron nitride

Thermally conductive polymer matrix composite (PMC) foams with effective thermal conductivities (k_eff) higher than their solid counterparts have been developed for the first time. Using a material system consists of low density polyethylene and micron‐scale or submicron‐scale hexagon boron nitride platelets as a case example, this article demonstrates that foaming‐assisted filler networking is a feasible processing strategy to enhance PMC's k_eff, especially at a low hBN loading. Parametric studies were conducted to identify the structure‐to‐property relationships between foam morphology (e.g., cell population density, cell size, and foam expansion) and the PMC foam's k_eff. In particular, there exists an optimal cell size to maximize the PMC foam's k_eff for foams with up to 50% volume expansion. However, an optimal cell size is absent for PMC foams with higher volume expansion. X‐ray diffraction (XRD) analyses reveal that both the presence of hBN platelets and foam expansion promoted the crystallization of LDPE phase. Moreover, the XRD spectra also provide evidence for the effect of foam expansion on the orientation of hBN platelets. Overall, the findings provide new directions to design and fabricate thermally conductive PMC foams with low filler contents for heat management applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42910.     

GLLS for optimally sampled continuous dynamic system modeling: theory and algorithm

The original generalized linear least squares (GLLS) algorithm was developed for non-uniformly sampled biomedical system parameter estimation using finely sampled instantaneous measurements (D. Feng, S.C. Huang, Z. Wang, D. Ho, An unbiased parametric imaging algorithm for non-uniformly sampled biomedical system parameter estimation, IEEE Trans. Med. Imag. 15 (1996) 512-518). This algorithm is particularly useful for image-wide generation of parametric images with positron emission tomography (PET), as it is computationally efficient and statistically reliable (D. Feng, D. Ho, Chen, K., L.C. Wu, J.K. Wang, R.S. Liu, S.H. Yeh, An evaluation of the algorithms for determining local cerebral metabolic rates of glucose using positron emission tomography dynamic data, IEEE Trans. Med. Imag. 14 (1995) 697-710). However, when dynamic PET image data are sampled according to the optimal image sampling schedule (OISS) to reduce memory and storage space (X. Li, D. Feng, K. Chen, Optimal image sampling schedule: A new effective way to reduce dynamic image storage space and functional image processing time, IEEE Trans. Med. Imag. 15 (1996) 710-718), only a few temporal image frames are recorded (e.g. only four images are recorded for the four parameter fluoro-deoxy-glucose (FDG) model). These image frames are recorded in terms of accumulated radio-activity counts and as a result, the direct application of GLLS is not reliable as instantaneous measurement samples can no longer be approximated by averaging of accumulated measurements over the sampling intervals. In this paper, we extend GLLS to OISS-GLLS which deals with the fewer accumulated measurement samples obtained from OISS dynamic systems. The theory and algorithm of this new technique are formulated and studied extensively. To investigate statistical reliability and computational efficiency of OISS-GLLS, a simulation study using dynamic PET data was performed. OISS-GLLS using 4-measurement samples was compared to the non-linear least squares (NLS) method using 22-measurement samples, GLLS using 22-measurement samples and OISS-NLS using 4-measurement samples. Results demonstrated that OISS-GLLS was able to achieve parameter estimates of equivalent accuracy and reliability in comparison to NLS or GLLS using finely sampled measurements (22-measurement samples), or OISS-NLS using optimally sampled measurements (4-measurement samples). Further more, as fewer measurement samples are used in OISS-GLLS, this algorithm is computationally faster than NLS or GLLS. Therefore, OISS-GLLS is well-suited for image-wide parameter estimation when PET image data are recorded according to the optimal image sampling schedule.     

Dynamic event trees in accident sequence analysis: application to steam generator tube rupture

A dynamic event tree method for analyzing the risk associated with dynamic nuclear power plant accident sequences is presented. The method provides a framework for treating stochastic variations in operating crew states (defined by substrates characterizing the accident diagnosis, the planned actions, and the crew quality) as well as stochastic variations in hardware states. Plant process variables are treated deterministically; they are used when determining the likelihood of stochastic branchings. The method is used in an analysis of a steam generator tube rupture (SGTR) accident; it is shown that a number of important operator behavior patterns can be reasonably represented, and that, comparing with conventional event trees, sources of dependencies between failure events can be better defined.     

Activity of (-)-2'-deoxy-3'-oxacytidine (BCH-4556) against human tumor colony-forming units

BACKGROUND: BCH-4556 ((-)-2'-deoxy-3'-oxacytidine) is an L-nucleoside analogue shown to have broad preclinical anti-cancer activity, particularly against solid neoplasms such as prostate, renal, and hepatoma in vitro and in vivo, in contrast to cytosine arabinoside (ara-C) which is preferentially active against leukemia. MATERIALS AND METHODS: The antitumor activity of BCH-4556 was evaluated using human tumor colony-forming unit (HTCFU) assay, in which fresh tumor specimens were taken directly from patients with and without prior chemotherapy. RESULTS: Overall, in vitro responses (50% or less survival compared to untreated controls) were observed in 11% (two of 18), 29% (five of 17) and 50% (nine of 18) of specimens treated for one hour with BCH-4556 at 1, 10 and 100 micrograms/ml, respectively; and 16% (nine of 55), 32% (24 of 74), 48% (35 of 73) and 65% (11 of 17) of specimens treated continuously with BCH-4556 at 0.1, 1, 10 and 100 micrograms/ml, respectively. With the one-hour schedule, a significant difference in response rates was noted between 100 micrograms/ml and 1 microgram/ml (P = 0.02). With the continuous schedule, significant differences in response rates were observed between 1 microgram/ml and 0.1 microgram/ml (P = 0.02), between 10 micrograms/ml and 0.1 microgram/ml (P = 0.0001), as well as between 10 micrograms/ml and 1 microgram/ml (P = 0.01). A trend suggesting the superiority of continuous exposure was observed in paired specimens (n = 18) at comparable drug concentrations. Activity was noted against ovarian (nine of 16 = 56%), renal (three of four = 75%), and melanoma (two of two = 100%) HTCFU at 10 micrograms/ml using the continuous schedule. Comparisons between BCH-4556 and paclitaxel were made in 32 specimens at 10 micrograms/ml using the continuous exposure. Twenty-three specimens showed similar responses with both drugs; seven showed better responses with BCH-4556; and two showed better responses with paclitaxel (P = 0.18). CONCLUSIONS: Promising activity was observed with BCH-4556 against ovarian, renal, and melanoma HTCFU. There appeared to be a positive relationship between BCH-4556 concentration and response using both one-hour and continuous exposures. Continuous exposure to BCH-4556 provided high response rates especially at concentrations above 10 micrograms/ml. For both one-hour and continuous exposures, BCH-4556 had similar, and at times, greater potency than paclitaxel against the same tumor specimens in the present study.     

Fast radix-3/9 discrete Hartley transform

An efficient algorithm for computing radix-3/9 discrete Hartley transforms (DHTs) is presented. It is shown that the radix-3/9 fast Hartley transform (FHT) algorithm reduces the number of multiplications required by a radix-3 FHT algorithm for nearly 50%. For the computation of real-valued discrete Fourier transforms (DFTs) with sequence lengths that are powers of 3, it is shown that the radix-3/9 FHT algorithm reduces the number of multiplications by 16.2% over the fastest real-valued radix-3/9 fast Fourier transform (FFT) algorithm     

Lumbar spine magnetic resonance imaging: comparison between fast spin echo proton density and spin echo T1 axial scans

Spin echo (SE) T1 axial scans are routinely obtained in magnetic resonance imaging of the lumbar spine in many centres. This study directly compared matched SE T1 and fast SE (FSE) proton density (PD) axial scans. Both SE T1 and FSE PD axial scans of the lumbar spine were obtained in 116 consecutive patients. The imaging parameters (field-of-view, slice thickness, interslice gap, number of excitations and matrix size) and scan levels were identical for each pair of sequences. At two selected levels, L4/5 and L5/S1, various structures were independently graded by two observers. In 232 lumbar levels analysed, the bone marrow, epidural fat, disc, extradural nerve root and facet joint were equally well seen on both sequences by both observers (combined mean grades of 2.93-2.99). The thecal sac was marginally better depicted on FSE PD than on SE T1 images, with mean grades of 2.96 and 2.88, respectively. The psoas muscle was adequately visualized for diagnostic purposes on both sequences (mean grades of 2.30-2.32). The cauda equina were better seen on FSE PD (mean grade 1.92) than on SE T1 (mean grade 1.00) images. In conclusion, FSE PD scans are comparable to and may potentially replace SE T1 axial MR scans of the lumbar spine.