Large strain response in acceptor- and donor-doped Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-based lead-free ceramics

Effects of Fe and La addition on the dielectric, ferroelectric, and piezoelectric properties of Bi_0.5Na_0.5TiO₃–Bi_0.5Li_0.5TiO₃–BaTiO₃–Mn ceramics were investigated. Similar to the doping effect in lead-based piezoelectric materials, here the Fe-doped ceramic created a hard effect with an improved mechanical quality factor (Q _m) ~ 160, coercive field (E _c) ~ 2.9 kV/mm, decreased dielectric constant ( e₃₃^T /e₀ ) ~ 80 3, \left( {\varepsilon_{33}^{T} /\varepsilon_{0} } \right)\sim 80 3, and loss (tanδ) ~ 0.024 while the La-doped one indicated a soft feature with improved piezoelectric constant (d ₃₃) ~ 184 pC/N, e₃₃^T /e₀   ~ 983, \varepsilon_{33}^{T} /\varepsilon_{0} \,\sim { 983}, tanδ ~ 0.033, and decreased E _c ~ 2.46 kV/mm. In addition, the temperature dependence of the ferroelectric hysteresis loops and strain response under unipolar electric field was also studied. Around the depolarization temperature T _d, large strain value was obtained with the normalized d₃₃^* d_{33}^{*} up to ~1,000 pC/N, which was suggested originated from the development of the short-range order or non-polar phases in the ferroelectric matrix. All these would provide a new way to realize high piezoelectric response for practical application in different temperature scale.     

Electrospray mass spectrometry: application of ion evaporation theory to amino acids

We describe the result of applying the ion evaporation theory to a series of amino acids. The very good correlation (r = 0.98) of the natural logarithms of protonated molecule intensities observed by electrospray with the difference between the hydration free energies of molecules and the gas-phase binding free energies of molecules and protons in amino acids is consistent with the ion evaporation model. It seems that the difference in the protonated molecule intensities of amino acids obtained by electrospray can be explained by a scheme in which protonated molecules in the liquid phase are extracted into the gas phase after a charged droplet is formed.     

Optical emission from LiNbO3(:Fe)/porous Si structures

Using pulsed laser deposition, a layer of LiNbO₃(:Fe) film with a thickness of 180 nm was coated onto porous Si (PS) stored in air for 1 year. A photoluminescence (PL) band enhanced about three times was observed at ∼625 nm with a same peak position as that of the stored PS. It is revealed that a new PL excitation band occurs at ∼363 nm, which is nearly equal to the fundamental optical absorption edge position of LiNbO₃. The X-ray diffraction results disclose that the enhancement of the PL intensity is closely related to formation of a textured LiNbO₃ film. Based on spectral analysis, we attribute the enhanced PL to optical transition in the E′ defect centers localized at the surfaces of PS nanocrystals, whereas the photoexcited carriers mainly come from the coated LiNbO₃ film. This kind of LiNbO₃(:Fe)/PS structures is expected to have important applications in modern ferroelectric optoelectronics.     

Roofing Materials’ Contributions to Storm-Water Runoff Pollution

Development in sensitive watersheds continues to pose environmental problems for receiving waters. One contributor to this long-term pollution is building and other construction materials. However, the long-term effect of many building materials on the environment has not been quantified due to limited testing of these materials prior to sales and installation. Laboratory “leach” testing of commercially available roofing materials by this research group indicated that the potential for release (primarily nutrients, lighter hydrocarbons, pesticides, and metals) is substantial. Testing of metals’ release from aged roofing panels also has shown that the potential for pollutant release still exists after 60?years. The data missing from a complete evaluation of many roofing materials is behavior over the lifespan of the material, including the critical period of initial exposure. The 2?years of runoff data from a pilot-scale testing of these materials indicated substantial concerns regarding zinc from uncoated galvanized metals and copper from treated woods in this early part of the materials’ lifespan, plus the potential for long-term nutrient releases in the runoff from several roofing types.     

Use of a Modified Network Model for Analyzing Evacuation Patterns in High-Rise Buildings

A modified coarse network model has been developed to simulate the evacuation patterns in high-rise buildings. The model can account for high-density situations as well as recording the process of an individual's locomotion pattern. The results of simulations show that all occupants in a high-rise building are unlikely to escape in a few minutes. Provision of a refuge space such as a designated refuge floor can facilitate the evacuation process and provide a temporary “resting place” for evacuees. The effect of the width of the staircase or escape routes is examined in high-density buildings. The reaction time of occupants has also been studied and has demonstrated that in high-density buildings, there exists a threshold limit within which its effect on the overall evacuation time is not critical.     

Role of cadherins in the transendothelial migration of melanoma cells in culture

This study examines the nature and extent of the relationship between stress levels and intentions to participate in a worksite smoking cessation program among male current smokers (n = 220) employed in an automobile manufacturing plant. A plantwide survey was conducted which measured job stress, nonjob stress, smoking behavior, and intent to participate. The results of polychotomous logistic regressions suggest that among the current smokers in this plant, job and nonjob stress were positively associated with workers' intentions to participate in a worksite smoking cessation program. Thus, contrary to the popular notion that stress diminishes the motivation to quit, employees under high levels of stress may be most receptive to educational interventions intended to persuade smokers to commit to quitting.     

Two-Stage Structural Health Monitoring Approach for Phase I Benchmark Studies

This paper presents a two-stage structural health monitoring methodology and applies it to the Phase I benchmark study sponsored by the IASC-ASCE Task Group on Structural Health Monitoring. In the first stage, modal parameters are identified using measured structural response from the undamaged system and then from the (possibly) damaged system. In the second stage, these data are used to update a parametrized structural model of the system using Bayesian system identification. The approach allows one to obtain not only estimates of the stiffness parameters but also the probability that damage in any substructure exceeds any specified threshold expressed in terms of a fractional stiffness loss. It successfully identifies the location and severity of damage in all cases of the benchmark problem.     

Correlation of in vitro susceptibility testing results for amoxicillin-clavulanate and ampicillin-sulbactam using a panel of beta-lactamase-producing Enterobacteriaceae

Laryngospasm occurring after tracheal extubation in children is potentially dangerous. This study uses acupuncture with bloodletting at the Shao Shang (L 11) or Shang Yang (Li 1) acupoints to investigate whether this technique can prevent or treat laryngospasm. Seventy-six patients were randomly divided into two groups. Patients in the acupuncture group (n = 38) were treated with bilateral Shao Shang acupunctures at the end of the operation. Patients in the control group (n = 38) were not. The incidence of laryngospasm in the acupuncture group (5.3%) was less than that in the control group (23.7%) (p < 0.05). If laryngospasm developed, patients were immediately treated with acupuncture at either the Shao Shang or Shang Yang acupoints. As judged by an increase in peripheral oxygen saturation, the laryngospasm was relieved within 1 min of acupuncture in all patients. It is concluded that acupuncture with bloodletting at the Shao Shang acupoint may prevent and treat laryngospasm occurring after tracheal extubation in children.     

Activity of (-)-2'-deoxy-3'-oxacytidine (BCH-4556) against human tumor colony-forming units

BACKGROUND: BCH-4556 ((-)-2'-deoxy-3'-oxacytidine) is an L-nucleoside analogue shown to have broad preclinical anti-cancer activity, particularly against solid neoplasms such as prostate, renal, and hepatoma in vitro and in vivo, in contrast to cytosine arabinoside (ara-C) which is preferentially active against leukemia. MATERIALS AND METHODS: The antitumor activity of BCH-4556 was evaluated using human tumor colony-forming unit (HTCFU) assay, in which fresh tumor specimens were taken directly from patients with and without prior chemotherapy. RESULTS: Overall, in vitro responses (50% or less survival compared to untreated controls) were observed in 11% (two of 18), 29% (five of 17) and 50% (nine of 18) of specimens treated for one hour with BCH-4556 at 1, 10 and 100 micrograms/ml, respectively; and 16% (nine of 55), 32% (24 of 74), 48% (35 of 73) and 65% (11 of 17) of specimens treated continuously with BCH-4556 at 0.1, 1, 10 and 100 micrograms/ml, respectively. With the one-hour schedule, a significant difference in response rates was noted between 100 micrograms/ml and 1 microgram/ml (P = 0.02). With the continuous schedule, significant differences in response rates were observed between 1 microgram/ml and 0.1 microgram/ml (P = 0.02), between 10 micrograms/ml and 0.1 microgram/ml (P = 0.0001), as well as between 10 micrograms/ml and 1 microgram/ml (P = 0.01). A trend suggesting the superiority of continuous exposure was observed in paired specimens (n = 18) at comparable drug concentrations. Activity was noted against ovarian (nine of 16 = 56%), renal (three of four = 75%), and melanoma (two of two = 100%) HTCFU at 10 micrograms/ml using the continuous schedule. Comparisons between BCH-4556 and paclitaxel were made in 32 specimens at 10 micrograms/ml using the continuous exposure. Twenty-three specimens showed similar responses with both drugs; seven showed better responses with BCH-4556; and two showed better responses with paclitaxel (P = 0.18). CONCLUSIONS: Promising activity was observed with BCH-4556 against ovarian, renal, and melanoma HTCFU. There appeared to be a positive relationship between BCH-4556 concentration and response using both one-hour and continuous exposures. Continuous exposure to BCH-4556 provided high response rates especially at concentrations above 10 micrograms/ml. For both one-hour and continuous exposures, BCH-4556 had similar, and at times, greater potency than paclitaxel against the same tumor specimens in the present study.     

Dynamic event trees in accident sequence analysis: application to steam generator tube rupture

A dynamic event tree method for analyzing the risk associated with dynamic nuclear power plant accident sequences is presented. The method provides a framework for treating stochastic variations in operating crew states (defined by substrates characterizing the accident diagnosis, the planned actions, and the crew quality) as well as stochastic variations in hardware states. Plant process variables are treated deterministically; they are used when determining the likelihood of stochastic branchings. The method is used in an analysis of a steam generator tube rupture (SGTR) accident; it is shown that a number of important operator behavior patterns can be reasonably represented, and that, comparing with conventional event trees, sources of dependencies between failure events can be better defined.