Performance of a Tied-Arch Reinforced Concrete Railway Bridge: Rating, Safety Assessment, and Bond Length Evaluation

This study presents investigations regarding visual inspection, dynamic testing, and finite-element modeling of an approximately 80-year old reinforced concrete tied-arch railway bridge that is still in service in Turkey. Investigations were conducted as part of a systematic periodic inspection along Ankara-Zonguldak railway line. The bridge is subject to heavy freight trains with increasing axle loads. Field tests such as material tests and dynamic tests were used to calibrate the finite-element model of the bridge. Detailed information regarding testing and model updating procedure is given. Based on test results, computer model was refined. The calibrated model of the bridge structure was then used for structural assessment and evaluation. Despite sufficient overall safety, local details were found to be problematic. Due to insufficient bond length in hanger-to-arch connection, a strengthening scheme using steel channel sections was proposed.     

Effects of pomegranate sauce on quality of marinated anchovy during refrigerated storage

Effects of pomegranate sauce on the quality of marinated anchovy during storage at 4 °C were investigated. Anchovy were marinated with 30 g/L acetic acid and 150 g/L salt, put into glass jars, filled with either sunflower oil or pomegranate sauce and stored at 4 °C. Total volatile basic nitrogen (TVB-N) and trimethylamine (TMA-N) values increased during the storage. Higher values for free fatty acid (FFA), conjugated diens (k-dien) and para-anisidine (p-Av) were found in samples with sunflower oil than those with pomegranate sauce. Samples in pomegranate sauce showed better oxidative stability. Higher taste and flavour and lower appearance scores were found for samples in pomegranate sauce than those samples in sunflower oil. It was found that pomegranate sauce was as least effective as the traditional sunflower oil to keep quality. Pomegranate sauce also produced desirable taste and flavour but the coloration should be studied in further studies.     

Investigation on the effect of spinning conditions on the properties of hollow fiber membrane for hemodialysis application

Polyethersulfone (PES) hollow fiber membranes were fabricated via the dry‐wet phase inversion spinning technique, aiming to produce an asymmetric, micro porous ultrafiltration hollow‐fiber specifically for hemodialysis membrane. The objective of this study is to investigate the effect of spinning conditions on the morphological and permeation properties of the fabricated membrane. Among the parameters that were studied in this work are air gap distance, dope extrusion rate, bore fluid flow rate, and the take‐up speed. The contact angle was measured to determine the hydrophilicity of the fibers. Membrane with sufficient hydrophilicity properties is desired for hemodialysis application to avoid fouling and increase its biocompatibility. The influences of the hollow fiber's morphology (i.e., diameter and wall thickness) on the performance of the membranes were evaluated by pure water flux and BSA rejection. The experimental results showed that the dope extrusion rate to bore fluid flow rate ratio should be maintained at 1:1 ratio to produce a perfectly rounded asymmetric hollow fiber membrane. Moreover, the flux of the hollow fiber spun at higher air gap distance had better flux than the one spun at lower air gap distance. Furthermore, spinning asymmetric hollow fiber membranes at high air gap distance helps to produce a thin and porous skin layer, leading to a better flux but a relatively low percentage of rejection for BSA separation. Findings from this study would serve as primary data which will be a useful guide for fabricating a high performance hemodialysis hollow fiber membrane. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43633.     

Contour diagram fuzzy model for maximum surface ozone prediction

A contour diagram approach is presented for the identification of surface ozone concentration feature based on a set of rules by considering the meteorological variables such as the solar radiation, wind speed, temperature, humidity and rainfall. A fuzzy rule system approach is used because of the imprecise, insufficient, ambiguous and uncertain data available. The contour diagrams help to identify qualitative ozone concentration variability rules which are more general than conventional statistical or time series analysis. In the methodology, ozone concentration contours are based on a fixed variable as ozone precursor, namely, NO_x and as the third variable one of the meteorological factors. Such contour diagrams for ozone concentration variation are prepared for six months. It is possible to identify the maximum ozone concentration episodes from these diagrams and then to set up the valid rules in the form of IF-THEN logical statements. These rules are obtained from available daily ozone, NO_x and meteorological data as a first approximate reasoning step. In this manner, without mathematical formulations, expert maximum ozone concentration systems are identified. The application of the contour diagram approach is performed for daily ozone concentration measurements on European side of Istanbul city. It is concluded that through approximate reasoning with fuzzy rules, the maximum ozone concentration episodes can be identified and predicted without any mathematical expression.     

An integrated decision aid extension to material selection problem

Choice of an adequate material in design process is one of the critical tasks for the relevant decision-makers. At this insight, the consistency of the decisions is extremely depending on the relevance of adapted techniques to the nature of different problem cases. This paper proposed an integrated decision aid (IDEA) to match the suitable techniques with different problem cases based on the following six dimensions: (i) the type of the decision problem, (ii) the size of the problem, (iii) selection of the preference techniques by decision-makers, (iv) decision-makers’ preference structure, (v) the necessity for the use of relative importance, (vi) the nature of performance values. Furthermore, the implementation procedure of the proposed IDEA for a material selection problem is demonstrated with the previously cited applications from material science literature. Hereafter, it is expected that the IDEA provides great advantages and encouragements to researchers/practitioners in order to prevent excessive time consuming, probable misapplications, and the other challenging issues in multiple criteria analysis of material selection problems.     

Graft copolymerization of poly(methyl methacrylate) with some alkyl methacrylates by atom transfer radical polymerization method and thermal properties

The preparation of graft copolymers of poly(methyl methacrylate) with some alkyl methacrylates were carried out via atom transfer radical polymerization method catalyzed by CuCl/2,2′-bipyridine and using a macroinitiator, poly[(methyl methacrylate)-co-(3,5-bis(chloroacetoxy)phenyl methacrylate)], including an amount of 1 mol % having α-halogeno carbonyl group in the side groups. Although the number-average molecular weights of a graft copolymer series of n-butyl methacrylate (n-ButMA) ended at different times increased from 55,700 to 99,500, the polydispersities decreased from 1.85 to 1.39 with time. The thermal degradation kinetics of macroinitiator and a two-armed graft copolymer of n-ButMA with this macroinitiator, PMMA-g-PnButMA: 4% (by mol), were carried out at different heating rates by thermogravimetric analysis and the results were compared. Using both the Flynn–Wall–Ozawa and Kissinger methods, the decomposition activation energies for macroinitiator were determined as 168 and 162 kJ/mol, respectively; they were also calculated as 233 and 239 kJ/mol for PMMA-g-PnButMA: 4%. The solid state thermodegradation mechanisms of both macroinitiator and PMMA-g-PnButMA: 4% are R₁-type mechanism, a phase boundary-controlled reaction, and F₁-type mechanism, a random nucleation with one nucleus on the individual particle, respectively. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012