Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

用六水氯化钙作为相变材料的换热器储热性能研究

研究了一种以传统的管壳式换热器作为结构基础、管内充填相变材料——六水氯化钙的新型相变材料换热器的储热性能。对这种新型相变材料换热器分别通入温度不同的冷热流体，利用温度测试系统对其进口、出口的温度进行了测试。实验结果表明，这种相变材料换热器结构能将温度较高的热流体的热能通过其管内充填的相变材料储存起来，必要时又可以将储存的热能释放给所需的流体中，从而使其既具有热量交换的功能又具有热量储存的功能。它主要适用于温室、暖房、工业生产中的低品位热能的回收和利用，还可以应用于热能供应与人们需求之间不一致的场合，如太阳能热利用、采暖和空调领域等。     

Computer simulation of electrospinning. Part I. Effect of solvent in electrospinning

Electrospinning technique has been recognized as an efficient method to manufacture nano-fiber. At present, research focuses on the structure and morphology of the fibers, a few investigations have been reported the mechanism of electrospinning. In our experiment, appropriate polymer EVOH (ethylene/vinyl alcohol copolymer) and different solvents were chosen, the energy change in the process of molecule orientation was analyzed by computer simulation, and the morphologies of the fiber were indicated by scanning electron microscope (SEM). Results indicate that: in the process of molecule orientation, some barriers should be overcome; the height of the barrier is determined by the relaxation times (τ) of the molecule. The relaxation times vary in different solutions, when the relaxation time is short, the orientation of molecule is easy, so jet instability will be fierce, and fibers with small diameter are obtained.     

The influence of resin characteristics on the high speed melt spinning of isotactic polypropylene. II. On-line studies of diameter,birefringence, and temperature profiles

An investigation was carried out of the high speed melt spinning of three polypropylene resins with melt flow indices of 12, 35, and 300. On-line measurements were made of diameter, birefringence, and temperature as a function of distance from the spinneret for a range of spinning conditions for each polymer. A plateau (decrease of cooling rate) in the temperature profile was associated with the occurrence of crystallization in the spinline. The position of this plateau correlated with a rapid rise in the birefringence profile and a rapid decrease in the rate of drawdown in the diameter profile. The temperature and birefringence profiles were used to determine the temperature and position on the spinline at which the onset of crystallization occurred. It was found that the position and temperature of crystallization onset varied considerably with changes in take-up velocity, extrusion temperature, and resin melt index (weight average molecular weight). The crystallization onset occurred nearer the spinneret and at higher temperatures with (1) an increase of take-up velocity, (2) a decrease of extrusion temperature, or (3) a decrease of resin melt flow index. An analysis was carried out to estimate the rate of stress development with distance along the spinline; the results were also used to estimate the stress at the onset of crystallization for each spinning condition. It was concluded that the observed behavior could be attributed to the role of spinline stress in producing molecular orientation and consequent increase of crystallization rate.     

基于Retinex和BM3D的图像增强

为克服传统Retinex算法没有解决的噪声问题,提出了一种基于Retinex和BM3D的图像增强算法。该方法将BM3D去噪环节加入到传统Retinex算法中。首先,计算出图像各像素之间的相对明暗关系,进而对待处理图像中的每个像素点灰度值进行校正;然后,通过在相邻图像块中搜索相似块,组成一个三维矩阵,并在三维空间进行滤波处理,得到块预估计值;最后,对图像中每个点进行加权得到最终的处理结果。实验结果表明,该算法既能显示阴影、光照区域中的细节,又能有效消除图像中含有的噪声,克服了传统Retinex图像增强算法的不足。     

红细胞瞬间磁化试剂的制备与应用

目的研制用于ABO、RHD血型检测试剂的红细胞瞬间磁化试剂。方法采用共沉淀法制备磁性粒子,并检测其主要成分及粒径大小,用此磁性粒子制备红细胞瞬间磁化试剂,并分别进行各项检测。结果磁性粒子的主要成分为四氧化三铁,粒径100nm左右。该试剂的外观及特异性均合格,磁响应时间不超过30s,重复性较好,敏感性为98.20%,与试管法检测结果比较,差异无显著意义。结论红细胞瞬间磁化试剂可用于红细胞系统的血型检测。     

气化炉改用脱油沥青原料系统结垢原因分析及对策

针对气化炉使用脱油沥青过程中出现的结垢问题，重点分析了其原因及机理，介绍了所采取的措施和效果。     

TCS技术12头纺生产涤纶FDY工艺探讨

采用热管纺丝 (TCS)技术 12头纺生产涤纶FDY ,替代传统的热导丝辊式生产涤纶FDY的模式 ,具有短流程、低能耗、易维修、少投入、高效益等特点。本文对采用TCS技术 12头纺生产 76dtex 2 4f涤纶FDY的纺丝工艺 ,及它们对生产、产品质量的影响进行了探讨。纺丝速度为 480 0m min ,热管温度控制在 170～ 175℃时 ,产品质量良好     

发生炉炉况综合量化制度的建立与应用

从全面质量管理工序控制的角度出发 ,借鉴焦炉加热管理的方法 ,首次对混合煤气发生炉生产中的主要工序——炉况控制制定了综合量化考评标准 ,并在我厂 17台 CG- 3型混合煤气发生炉的生产工艺管理中进行了实践应用 ,取得了显著效果     

改良MDEA脱碳存在问题的探讨与对策

介绍MDEA脱碳在我公司生产过程中出现的问题 ,并提出了相应的解决方案