Influence of post‐treatments on the properties of porous poly(vinyl alcohol) membranes

Porous poly(vinyl alcohol) (PVA) membranes were prepared by a phase‐inversion method. The influence of chemical crosslinking and heat treatments on the swelling degree, resistance to compaction, mechanical strength, and morphology of porous PVA membranes was extensively studied. The crosslinking degree and crystallinity of the membranes, calculated from IR spectra, increased with the treatment time. The porosity, calculated on the basis of swelling experiments, showed a decreasing trend for heat‐treated membranes but remained almost at a constant value for crosslinked membranes. Such a change was further proved with scanning electron microscopy pictures. The behavior was explained by the rearrangement of PVA chains during the heat‐treatment process, which led to morphological changes in the membranes. The mechanical properties of the porous membranes in dry and wet states were measured, and a great difference was observed between crosslinked and heat‐treated membranes in the dry and wet states. The crosslinked membranes showed good mechanical properties in the dry state but became fragile in the wet state. On the contrary, the heat‐treated membranes were more flexible in the wet state than in the dry state. This change was explained by the turnaround of inner stress in the systems during the swelling process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Shear-induced crystallization of poly(phenylene sulfide)

The crystalline morphology of poly(phenylene sulfide) (PPS) isothermally crystallized from the melt under shear has been observed by polarized optical microscope (POM) equipped with a CSS450 hot-stage. The shish–kebab-like fibrillar crystal structure is formed at a higher shear rate or for a longer shear time, which is ascribed to the tight aggregation of numerous oriented nuclei in the direction of shear. The crystallization induction time of PPS decreases with the shear time, indicating that the shear accelerates the formation of stable crystal nuclei. Under shear, the increase of spherulite growth rate results from highly oriented chains. The melting behavior of shear-induced crystallized PPS performed by differential scanning calorimetry (DSC) shows multiple melting peaks. The lower melting peak corresponds to melting of imperfect crystal, and the degree of crystal perfection decreases as the shear rate increases. The higher melting peak is related to the orientation of molecular chains. These oriented molecular chains form the orientation nuclei which have higher thermal stability than the kebab-like lamellae that are developed later. A new model based on the above observation has been proposed to explain the mechanism of shish–kebab-like fibrillar crystal formation under shear flow.     

pH and salt responsive poly(N,N-dimethylaminoethyl methacrylate) cylindrical brushes and their quaternized derivatives

We present the synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) cylindrical brushes, their pH responsiveness, and the corresponding quaternized analog, poly{[2-(methacryloyloxy)ethyl] trimethylammonium iodide} (PMETAI) brushes. PDMAEMA brushes were prepared by atom transfer radical polymerization (ATRP) using the grafting-from strategy. Initiating efficiencies of the ATRP processes were determined by cleaving the side-chains and gel permeation chromatography (GPC) analysis. Due to the slow initiation and steric hindrance, the initiating efficiency is only around 50%. The PDMAEMA brushes show worm-like structures and pH responsiveness, as proven by dynamic light scattering (DLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo-TEM) measurements. Strong cationic polyelectrolyte PMETAI brushes were produced by quaternization of the PDMAEMA brushes. AFM and cryo-TEM images showed similar worm-like morphologies for the PMETAI brushes. The PMETAI brushes collapsed in solution with high concentration of monovalent salt, as proven by DLS and AFM results.     

Dual band-notched ultra-wideband microstrip antenna using asymmetrical spurlines

A simple and novel ultra-wideband microstrip-fed antenna with dual band-notched characteristic is presented. By etching a pair of asymmetrical spurlines on the feedline, two notched bands of 600 MHz (3.95? 4.55 GHz) and 650 MHz (5.35?6.0 GHz) are achieved. Measured results show that this antenna operates from 2.5 to 12.0 GHz for voltage standing wave ratio less than 2, except two frequency notched bands of 3.95?4.55 GHz and 5.35?6.0 GHz. Moreover, this antenna has good omnidirectional radiation patterns in the H-plane.     

Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

NUMERICAL STUDY ON QUASI- STEADY FLOW OF NONNEWTONIAN FLUID IN SUCK-ROD PUMP

This paper presents a numerical method for simulation of the flow and thecalculated results of the quasi-steady axisymmetrical flow field and pressure distribution on valveball with power-law model for Non-Newtonian fluid in suck-rod pump.We believe the methodcan provide a foundation for further research and improvement of the design of suck-rod pump.     

Rückgewinnung von Vinylchloridmonomer

The production of the polymer polyvinylchloride (PVC) emits a high amount of waste gas. The recovery of the evaporated base product vinylchoridemonomer (VC) is an important aspect for the economics of the whole process. Membrane and vacuum technology improve the efficiency and the economics of the recovery process considerably.