催化重整装置紧急停车系统

介绍固定床半再生催化重整装置紧急停车系统的组成、原理及工作过程，给出调试和维护要点。     

Study on Adsorption of Rare Earth Elements by Kaolinite

Rareearthelements (REEs)werewidelyappliedtotracingthesourcesofmaterialsandtostudyingtheirevolutionprocessesinmanyfieldsofearthscienceinconsiderationoftheirsimilarityandsystematicdiffer enceinchemicalproperties .Furthermore ,lanthanidesarebothimportantprod…     

Air oxidation behavior of nitrogen ion implanted zircaloy-4 at 500 °C

Journal of Materials Science -     

Modification of Boundary Parameters and Fluctuations by IBW and LHCD in the HT-7 Tokamak

Measurements of boundary parameters and their fluctuations have been performed in ohmic (OH) plasma and Ion Bernstein Wave (IBW) and Lower Hybrid Current Drive (LHCD) enhanced confinement plasma using a pneumatically driven Langmuir probe array on HT-7 toka-maX. In the enhanced confinement plasma~ the gradients of electron density and temperature become higher and a transport barrier comes into being in the vicinity of the limiter. The boundary potential shows a clear modification in the same region. The fluctuation levels are significantly depressed and the coherences between fluctuations are reduced evidently in the enhanced plasma.Meanwhile, we obtained the spectral features and the poloidal phase velocity of fluctuations us-ing a two-point correlation technique and found obvious modifications of the turbulence and the poloidal flow. The results suggest that the improved confinement in the IBW and LHCD enhanced plasma is at least partially due to the modification of the boundary parameters and the suppression of the boundary fluctuations and fluctuation induced fluxes.     

周铣加工表面形貌仿真新算法

考虑主轴偏心，基于周铣过程中刀具切削刃上任意点与工件相对运动的轨迹方程和周铣过程几何特征，构造出可以求解周铣加工表面上任意一点形貌高度值的三维表面形貌仿真算法，并给出了相应的仿真算例。该算法无需对刀齿进行微段离散，并且不依赖于工件网格划分，加工表面上任意一点形貌高度值的计算次数等于刀具齿数，具有通用性好、运算速度快、结果准确度高的特点。     

MRPⅡ在我国企业的实践和再认识

对MRPⅡ实际中的问题进行总结,从MRPⅡ的核心和管理思想、它与深化改革、强化管理的关系等方面再认识MRPⅡ.旨在推动我国企业进一步完善和发展MRPⅡ,加快企业网的建设和我国的信息化进程.     

苛性碱分解高钙黑钨精矿试验研究

研究了在高温，高压（Ｔ＝１８０℃，ｐ＝１．０～１．２×１０＾６Ｐａ）的加磷酸盐情况下，苛性碱分解高钙黑钨精矿的工艺，试验表明，高钙钨精矿的分解率（η）可达９８％以上，钨酸钠溶液中Ｐ／Ｗ比值也能满足工艺要求，与常温，常压工艺相比苛性碱的用量降低，分解时间缩短。     

Effect of H_2 dilution on the structure and properties of nc-CrC/a-C:H coatings deposited by a hybrid beams system

Nanocomposite Cr C/hydrogenated amorphous carbon(nc-CrC/a-C:H) coatings were deposited by a hybrid beams system comprised of a hollow cathode ion source and a cathodic arc ion-plating unit with varying H_2 flow rates. The influences of H_2 flow rates on the morphologies, microstructures, and properties of the coatings were systematically studied. The morphologies and microstructures of the coatings were characterized by SEM, AFM, XPS, Raman spectroscopy, GIXRD, and HRTEM. The mechanical and tribological properties were measured by a nano-indenter, scratch tester, and ball-ondisk tribometer. The wear tracks were evaluated using 3D profilometer, optical microscope, and EDS analysis. It has been found that a moderate H_2 flow rate can effectively smooth the surface, enlarge the fraction of a sp~3 bond, and improve the properties. The coating exhibits the highest hardness and elastic modulus at the H_2 flow rate of 40 sccm. A superior combination of adhesion strength,friction coefficient, and wear resistance can be achieved at the H_2 flow rate of 80 sccm.     

IR—UT钢水升温工艺实验

以苏州钢铁厂钢包为原型，通过水模和中频感应炉实验，确定了ＩＲ－ＵＴ－１６型精炼装置的设备参数和工艺参数，证实了采用Ａｌ或Ｓｉ－Ｃａ－Ｂａ－Ａｌ作发热剂进行钢水吹氧升温的可行性，钢水成分可满足小方坯连铸的要求。