Energy Transfer Induced by TADF Polymer Enables the Recycling of Excitons in Perovskite Solar Cells

Formamidinium lead triiodide (FAPbI₃) has been demonstrated as the most efficient perovskite system to date, due to its excellent thermal stability and an ideal bandgap approaching the Shockley-Queisser limit. Whereas, there are intrinsic quantum confinement effects in FAPbI₃, which lead to unwanted non-radiative recombination. Additionally, the black α-phase of FAPbI₃ is unstable under room temperature due to the significant residual tensile stress in the film. To simultaneously address the above issues, a thermally-activated delayed fluorescence polymer P1 is designed in the study to modify the FAPbI₃ film. Owing to the spectral overlap between the photoluminescence of P1 and absorption of the above-bandgap quantum wells of FAPbI₃, the Förster energy transfer occurs at the P1/FAPbI₃ interface, which further triggers the Dexter energy transfer within FAPbI₃. The exciton “recycling” can thus be realized, which reduces the non-radiative recombination losses in perovskite solar cells (PSCs). Moreover, P1 is found to introduce compressive stress into FAPbI₃, which relieves the tensile stress in perovskite. Consequently, the PSCs with P1 treatment achieve an outstanding power conversion efficiency (PCE) of 23.51%. Moreover, with the alleviation of stress in the perovskite film, flexible PSCs (f-PSCs) also deliver a high PCE of 21.40%.     

Robust tracking control for operator-based uncertain micro-hand actuator with Prandtl–Ishlinskii hysteresis

Since the hysteresis property inherently exists in the rubber material, it is necessary to deal with the control issues for the micro-hand by considering the hysteresis property. Therefore, in this paper, the robust tracking control for the micro-hand systems is discussed from the aspect of the Prandtl–Ishlinskii hysteresis property which is more applicable for the real applications. Firstly, a new model is obtained by combining the dynamic model of the micro-hand with Prandtl–Ishlinskii hysteresis property. Secondly, a new stability condition based on bounded input and bounded output stability is proposed for the Prandtl–Ishlinskii hysteresis modeled micro-hand system from two different cases. Thirdly, by designing the robust controllers based on the internal model control method, the tracking performance can be improved by eliminating the effect from the disturbance. Finally, simulation is used to further demonstrate the effectiveness of the proposed design scheme.     

基于高速环形振荡器的皮秒量级事件计时测量

研究设计基于高速环形振荡器的皮秒量级事件计时器。利用代表事件的信号上升沿去触发高速环形振荡器,产生与事件同步的时钟脉冲信号,对正弦参考信号采样,再通过全相位FFT算法处理,大幅提高事件计时测量的精度。实验结果表明,在正弦参考信号中心频率f₀=10 MHz,全相位FFT运算点数N=8 192,ADC的量化位数b=14 bits,采样频率f_s=140 MHz的情况下,事件计时器能够获得约3.16 ps rms的单次测量精度,时间稳定性优于±0.31 ps/h,实验结果与基于理论分析的误差范围一致,达到皮秒量级事件计时测量。     

Chatter detection for milling using novel p-leader multifractal features

Journal of Intelligent Manufacturing - Chatter in machining results in poor workpiece surface quality and short tool life. An accurate and reliable chatter detection method is needed before its...     

机车涂装线PLC控制系统设计

介绍了机车涂装线控制系统的原理,根据系统设计要求提出控制方案,设计了基于三菱FX2N可编程控制器和三菱AG-OT900触摸屏的涂装线控制系统,完成控制系统的硬件设计和软件设计,系统实现对机车涂装生产线过程的手动和自动控制,与PLC可编程控制机器人对话,实现机车涂装生产线自动排风、自动控制温度,遇到故障系统自动停止运行,完成对涂装生产现场的实时监控和报警;该设备现场运行情况表明,排风和温度控制精度高,运行可靠,满足系统各项要求.     

Hybrid algorithm for generalized mixed equilibrium problems and variational inequality problems and fixed point problems

In this paper, we introduce a new iterative algorithm by hybrid method for finding a common element of the set of solutions of finite general mixed equilibrium problems and the set of solutions of a general variational inequality problem for finite inverse strongly monotone mappings and the set of common fixed points of infinite family of strictly pseudocontractive mappings in a real Hilbert space. Then we prove strong convergence of the scheme to a common element of the three above described sets. Our result improves and extends the corresponding results announced by many others.     

使用备份加速RAID5数据重构

对于大部分中小企业,为了保证生产系统所存放数据的安全,通常使用RAID5和备份两种技术.提出了一种新型的RAID5加速重构模型,该模型具有以下优点:1)能够灵活整合生产系统和备份系统;2)充分利用备份系统的资源,加速生产系统内RAID5数据重构;3)改善生产系统服务质量;4)提高生产系统的可靠性和可用性.     

Quantized H∞ control for a class of 2-D systems with missing measurements

In this paper, the problem of quantized H∞ control is investigated for a class of 2-D systems described by Roesser model with missing measurements. The measurement missing of system state is described by a sequence of random variables obeying the Bernoulli distribution. Meanwhile, the state measurements are quantized by logarithmic quantizer before being communicated. By introducing a new 2-D Lyapunov-like function, a sufficient condition is derived to guarantee stochastically stable and H∞ performance of the closed-loop 2-D system, where the method of sector-bounded uncertainties is utilized to deal with quantization error. Based on the condition, the quantized H∞ control can be designed by using linear matrix inequality technique. A simulation example is also given to illustrate the proposed method.