Nanoparticle effects on the morphology and mechanical properties of polypropylene spunbond webs

We report morphology and mechanical properties of natural nanoclay incorporated spunbond polypropylene composite webs. Nanocomposite spunbond webs were produced with up to 5 wt % natural nanoclay additives on Reicofil®‐2 spunbond line. Influence of nanoclay on the resin rheological properties, processibility, and mechanical properties of webs were studied. Wide angle X‐ray diffraction and transmission electron microscopy analysis were used to investigate the nanocomposite morphology. Intercalated and flocculated morphology was observed for all the concentrates and for all the spunbond fiber webs. The microstructure and polymer morphology in the presence of additives was characterized using a polarized optical microscope. At higher percentage, excess clay platelets were excluded out of the spherulite boundaries. About 20–30% increase in tear strength was observed for webs with up to 2 wt % nanoclay additives. Compared with the control polypropylene spunbond web, nanoclay reinforced samples showed better dimensional stability. Different failure mode was observed for spunbond webs with additives. Spunbond webs with even as low as 1 wt % clay retain their morphology and integrity in bond point after thermal bonding. Nanoclay incorporated spunbond webs showed significant improvements in the stiffness. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Imaging defects and junctions in single-walled carbon nanotubes by voltage-contrast scanning electron microscopy

Voltage-contrast scanning electron microscopy is demonstrated as a new technique to locate and characterize defects in single-walled carbon nanotubes. This method images the surface potential along and surrounding a nanotube in device configuration and it is used here to study the following: (a) structural point-defects formed during nanotube growth, (b) nano-scale gap formed by high-current electrical breakdown, (c) electronic defect such as electron-irradiation induced metal-insulator transition, and (d) charge injection into the substrate which causes hysteresis in nanotube devices. The in situ characterization of defect healing under high bias is also shown. The origin of voltage-contrast, the influence of the above defects on the contrast profiles and optimum imaging conditions are discussed.     

Acrylic-based fire-retardant coatings for steel protection: Employing the concept of in situ ceramization

Traditional intumescent coatings are widely used as passive fire-protective coatings for steel structures as they are capable of expanding in the range of 20–50 times the original thickness thereby providing excellent insulation. However, the fragile nature of such residue and susceptibility to thermo-oxidation given their carbonaceous nature are key problematic issues. The concept of in situ ceramization is explored in this work as a means to form inorganic cohesive char with improved rigidity and thermo-oxidative stability. Coating samples were prepared by incorporating ammonium polyphosphate, talc, Mg(OH)₂, and polydimethylsiloxane as additives into acrylic resin at different weight fractions. Thermal analysis and x-ray diffraction have confirmed the reactions between the additives to form various crystalline magnesium phosphate phases, and to a small extent, silicon phosphate, thereby ensuring the thermo-oxidative stability of the residue. This is reiterated by the fire performance tests (by exposing the coatings to a temperature profile in a furnace similar to ISO 834 fire curve). Despite the advantages of rigid char and its thermo-oxidative stability as a result of formation of inorganic phosphates, the lack of swelling has resulted in relatively poor insulation capabilities of the char, and subsequently, compromised the fire protection times (that are in the range of 45–55 min). However, pyrolysis flow combustion calorimeter results of the coatings are promising and have shown a significant drop of up to 70% in the peak of heat release rate values as compared to neat resin.     

Live Cell Imaging of Enzymatic Turnover of an Adenosine 5′-Tetraphosphate Analog

The hydrolysis of nucleotides is of paramount importance as an energy source for cellular processes. In addition, the transfer of phosphates from nucleotides onto proteins is important as a post-translational protein modification. Monitoring the enzymatic turnover of nucleotides therefore offers great potential as a tool to follow enzymatic activity. While a number of fluorescence sensors are known, so far, there are no methods available for the real-time monitoring of ATP hydrolysis inside live cells. We present the synthesis and application of a novel fluorogenic adenosine 5′-tetraphosphate (Ap4) analog suited for this task. Upon enzymatic hydrolysis, the molecule displays an increase in fluorescence intensity, which provides a readout of its turnover. We demonstrate how this can be used for monitoring cellular processes involving Ap4 hydrolysis. To this end, we visualized the enzymatic activity in live cells using confocal fluorescence microscopy of the Ap4 analog. Our results demonstrate that the Ap4 analog is hydrolyzed in lysosomes. We show that this approach is suited to visualize the lysosome distribution profiles within the live cell and discuss how it can be employed to gather information regarding autophagic flux.     

Effects of enzymatic modification of milk proteins on flavour and textural qualities of set yoghurt

Milk proteins were enzymatically modified, using neutrase and trypsin immobilised on CM‐Sephadex C‐50, to the extent of 3, 4 and 5% degrees of hydrolysis. The neutrase‐treated milk and the trypsin‐treated milk were used separately to prepare set yoghurt. The set yoghurt prepared from neutrase‐treated milk showed an improvement in body, texture and flavour, a faster rate of acid development and a reduction in setting time compared with the control. However, the set yoghurt prepared from trypsin‐treated milk showed either a small or no improvement in textural and sensory properties. © 2000 Society of Chemical Industry     

An inclined porous slider bearing with a transverse magnetic field

A hydromagnetic inclined porous slider bearing with a transverse magnetic field is analysed. Expressions for various bearing characteristics are obtained for large and small Hartmann numbers. The dimensionless load capacity, friction and centre of pressure are computed for large Hartmann numbers in the open-circuit case; the load capacity and friction increase markedly with increasing Hartmann number.     

Effect of plasma treatment on the structure and allied textile properties of mulberry silk

Studies on the effect of nitrogen plasma on morphology and textile properties of mulberry silk fibers and fabrics have been conducted. The changes in the morphological structure have been monitored by transmission electron microscopy, X-ray diffraction, and internal reflection infrared spectroscopy. The changes in some of textile properties such as wettability, drying rate, and crease recovery owing to plasma treatment have also been investigated. It has been found that the surface of mulberry silk gets etched away, even affecting the crystalline region. This behavior is opposite to our findings on tassar silk. Therefore, an explanation of this differential behavior of mulberry with tasar on the basis of amino acid linkages vis-à-vis bonding, wettability, drying rate, and water retention capacity has been attempted. These results have been used to arrive at an understanding of internal structure of mulberry.     

Evaluation of Biodegradation of Pineapple Leaf Fiber Reinforced PVA Composites

Composites of polyvinyl alcohol (PVA) reinforced with different weight percentages of pineapple leaf fibers (PALF) were fabricated and evaluated for biodegradation by soil burial test and plate test. FTIR analysis indicated the existence of a chemical interaction between PVA and PALF. The water uptake study showed that the composites with higher fiber content displayed high tensile strength and brittleness but possessed lower water uptake potential. In the soil burial test, the composites with low matrix to filler ratios exhibited higher rates of degradation as evident by the associated decrease in molecular weights. Plate test performed using Pseudomonas putida showed that the composites were susceptible for degradation by bacteria. The results of this study indicated that PALF-reinforced PVA composites were completely biodegradable and could find potential applications in industries such as agriculture and packaging and safely disposed after use without causing environmental damage.     

Dynamic analysis of LLCC parallel resonant converter under pulse-width modulation control

Contents The large and small signal dynamic analysis of LLCC-type parallel resonant converter operating in continous-conduction mode under fixed frequency, variable duty-ratio (pulse-width modulation) control is presented in this paper. The nonlinear and small-signal equations of the converter including the supply and output rectifiers are derived. The influence of the converter operation on the supply input power factor and how the input rectifier affects the small-signal dynamics of the converter are discussed.

---

Dynamische Analyse von LLCC Parallel-Resonanz-Umrichtern bei Puls-Weiten-Modulation

Übersicht Die dynamische Groß- und Kleinsignalanalyse von LLCC Parallel-Resonanz-Umrichtern im nicht lückenden Betrieb bei fester Frequenz und Puls-Weiten-Modulation wird dargestellt. Die Gleichungen für nichtlineares und Kleinsignalverhalten des Umrichters unter Berücksichtigung der Eingangs- und Ausgangsgleichrichter werden abgeleitet. Der Einfluß des Umrichters auf den Leistungsfaktor am Eingang und die Wirkung des Eingangsgleichrichters auf die Kleinsignaldynamik des Umrichters werden diskutiert.

     

Ranking and Reranking with Perceptron

This work is inspired by the so-called reranking tasks in natural language processing. In this paper, we first study the ranking, reranking, and ordinal regression algorithms proposed recently in the context of ranks and margins. Then we propose a general framework for ranking and reranking, and introduce a series of variants of the perceptron algorithm for ranking and reranking in the new framework. Compared to the approach of using pairwise objects as training samples, the new algorithms reduces the data complexity and training time. We apply the new perceptron algorithms to the parse reranking and machine translation reranking tasks, and study the performance of reranking by employing various definitions of the margins.Editors: Dan Roth and Pascale Fung