Remote sensing of land surface temperature: the directional viewingeffect

Land surface temperature and emissivity products are currently being derived from satellite and aircraft remote sensing data using a variety of techniques to correct for atmospheric effects. Implicit in the commonly employed approaches is the assumption of isotropy in directional thermal infrared exitance. The authors' theoretical analyses indicate angular variations in apparent infrared temperature will typically yield land surface temperature errors ranging from 1 to 4°C unless corrective measures are applied     

Thermal Decomposition Study on CuInSe$$_{}$$ Single Crystals

The thermal analysis of the chemical vapor transport (CVT)-grown \(\hbox {CuInSe}_{2}\) single crystals was carried out by recording the thermogravimetric, differential thermogravimetric and differential thermal analysis curves. All the three thermo-curves were recorded simultaneously by thermal analyzer in the temperature range of ambient to 1080 K in inert nitrogen atmosphere. The thermo-curves were recorded for four heating rates of 5 K \(\cdot \,\hbox {min}^{-1}\), 10 K \(\cdot \,\hbox {min}^{-1}\), 15 K \(\cdot \,\hbox {min}^{-1}\) and 20 K \(\cdot \,\hbox {min}^{-1}\). The TG curve analysis showed negligible mass loss in the temperature range of ambient to 600 K, stating the sample material to be thermally stable in this temperature range. Above 601 K to the temperature of 1080 K, the sample showed continuous mass loss. The DTG curves showed two peaks in the temperature range of 601 K to 1080 K. The corresponding DTA showed initial minor exothermic nature followed by endothermic nature up to nearly 750 K and above it showed exothermic nature. The initial exothermic nature is due to absorbed water converting to water vapor, whereas the endothermic nature states the absorption of heat by the sample up to nearly 950 K. Above nearly 950 K the exothermic nature is due to the decomposition of sample material. The absorption of heat in the endothermic region is substantiated by corresponding weight loss in TG. The thermal kinetic parameters of the CVT-grown \(\hbox {CuInSe}_{2}\) single crystals were determined employing the non-mechanistic Kissinger relation. The determined kinetic parameters support the observations of the thermo-curves.     

A dynamic threshold based approach for mitigating black-hole attack in MANET

Mobile ad-hoc network is an infrastructure less type of network which does not require any kind of fixed infrastructure. It provides multi-hop communication between the source and destination nodes which are not within the direct range of each other through the intermediate nodes. These intermediate nodes cooperate with other nodes in finding an optimum and shortest route toward the destination. However, in holistic environments, some nodes do not cooperate with other nodes in finding the optimal route towards the destination and intentionally give the false route information of having the shortest path toward the destination with a high destination sequence number in order to attract the traffic toward itself and start dropping of the data packets instead of forwarding it. This type of routing misbehaviour is generally called as black hole attack or full packet dropping attack which is one of the most severe destructive attacks that lead to the network degradation. In this paper, we have proposed a protocol called as Mitigating Black Hole effects through Detection and Prevention (MBDP-AODV) based on a dynamic threshold value of the destination sequence number. In order to validate the efficiency of proposed protocol, the NS-2.35 simulator is used. The simulation results show that proposed protocol performs better as compared with existing one under black hole attack.     

Structural studies of silicon oxynitride layers formed by low energy ion implantation

Silicon oxynitride (Si_xO_yN_z) layers were synthesized by implanting ¹⁶O₂⁺ and ¹⁴N₂⁺ 30 keV ions in 1:1 ratio with fluences ranging from 5 × 10¹⁶ to 1 × 10¹⁸ ions cm⁻² into single crystal silicon at room temperature. Rapid thermal annealing (RTA) of the samples was carried out at different temperatures in nitrogen ambient for 5 min. The FTIR studies show that the structures of ion-beam synthesized oxynitride layers are strongly dependent on total ion-fluence and annealing temperature. It is found that the structures formed at lower ion fluences (∼1 × 10¹⁷ ions cm⁻²) are homogenous oxygen-rich silicon oxynitride. However, at higher fluence levels (∼1 × 10¹⁸ ions cm⁻²) formation of homogenous nitrogen rich silicon oxynitride is observed due to ion-beam induced surface sputtering effects. The Micro-Raman studies on 1173 K annealed samples show formation of partially amorphous oxygen and nitrogen rich silicon oxynitride structures with crystalline silicon beneath it for lower and higher ion fluences, respectively. The Ellipsometry studies on 1173 K annealed samples show an increase in the thickness of silicon oxynitride layer with increasing ion fluence. The refractive index of the ion-beam synthesized layers is found to be in the range 1.54-1.96.     

A microwave scattering model for layered vegetation

A microwave scattering model was developed for layered vegetation based on an iterative solution of the radiative transfer equation up to the second order to account for multiple scattering within the canopy and between the ground and the canopy. The model is designed to operate over a wide frequency range for both deciduous and coniferous forest and to account for the branch size distribution, leaf orientation distribution, and branch orientation distribution for each size. The canopy is modeled as a two-layered medium above a rough interface. The upper layer is the crown, containing leaves, stems, and branches. The lower layer is the trunk region, modeled as randomly positioned cylinders with a preferred orientation distribution above an irregular soil surface. Comparisons of results obtained using this model with measurements from deciduous and coniferous forests show good agreement at several frequencies for both like and cross polarizations     

2-Acetyl-1-pyrroline: A key aroma component of aromatic rice and other food products

2-Acetyl-1-pyrroline is an aroma compound that gives aromatic rice its characteristic flavor. This compound either is present naturally in various food sources or is generated during certain processing methods, as reported in a number of studies. This review focuses on several sources of 2-acetyl-1-pyrroline, including aromatic rice, and the factors, including chemical and genetic parameters, affecting the formation of 2-acetyl-1-pyrroline. Extensive work has been conducted on the agricultural parameters, postharvest processing, storage, and cooking methods, influencing the concentrations of 2-acetyl-1-pyrroline in different food commodities. This article is an attempt to emphasize the importance of this compound in the food industry as a major aroma compound.     

New, low-cost, high-power poly(o-anisidine-co-metanilic acid)/activated carbon electrode for electrochemical supercapacitors

A poly(o-anisidine-co-metanilic acid)/activated carbon composite is evaluated as an active material for electrochemical supercapacitors. Poly(o-anisidine-co-metanilic acid) (PASM) is potentiodynamically deposited on an activated carbon (AC)-coated stainless-steel substrate, in a supporting electrolyte of 1.0 M H₂SO₄ containing dissolved o-anisidine and metanilic acid, at a sweep rate of 50 mV s⁻¹. Scanning electron micrographs show a uniformly deposited, thick PASM film on the activated carbon. Electrochemical techniques, such as impedance analysis, cyclic voltammetry and galvanostatic experiments, are carried out to investigate the suitability of the PASM/AC electrode for supercapacitor applications. A maximum specific capacitance of 576 F g⁻¹ is obtained for PASM/AC at a 5 mA cm⁻² current density.     

Investigations on the thermal effects in non-circular journal bearings

A comparative study based on the thermal performance of elliptical and offset-halves journal bearings has been carried out by solving energy equation while assuming Parabolic Temperature Profile Approximation across the fluid film for faster computation of temperatures. Investigation for the rise in oil film temperatures, thermal pressures, load capacity, and power loss for three commercially available grade oils have been carried out for bearing configurations under study. It has been found that the offset-halves journal bearing runs cooler when compared with elliptical journal bearing profile with minimum power loss and good load capacity using Oil 2 as lubricant for which minimum thermal degradation has been observed.     

Frequency dependent electrical transport properties of 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine by impedance spectroscopy

The frequency dependent ac conduction mechanism in 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine (m-MTDATA) has been studied as a function of applied bias and temperature. The Cole–Cole plot shows a slightly depressed semicircle indicating Debye type relaxation. This result has been explained by an equivalent circuit of the device designed as a two parallel resistor and capacitance network in series with contact resistance. The ac conduction studies under dc bias for hole only devices shows an increase in device conductivity with the increase in bias. The variation of bulk resistance with applied bias indicates Space Charge Limited Conduction (SCLC) mechanism for hole conduction. The hole mobility of the material has also been evaluated from SCLC as 8.859 × 10^?6 cm²/V s. The temperature dependent impedance studies show two activation energies indicating two different phase of the material with a phase transition at 235 K.