Low‐Density Open Cellular Silicon Carbide Foams from Sucrose and Silicon Powder

Open cellular SiC foams with low densities were prepared by thermo‐foaming and setting (130°C–150°C) of silicon powder dispersions in molten sucrose followed by pyrolysis and reaction sintering at 1500°C. The bubbles generated in the dispersion by water vapor produced by the –OH condensation was stabilized by the adsorption of silicon particles on the air‐molten sucrose interface. The composition of a sucrose‐silicon powder mixture for producing SiC foam without considerable unreacted carbon was optimized. The sucrose in the thermo‐foamed silicon powder dispersion leaves 24 wt% carbon during the pyrolysis. The sintering additives such as alumina and yttria promoted the silicon‐carbon reaction. SiC nanowires with diameters in the range of 35–55 nm and length >10 μm observed on the cell walls as well as in the fractured strut region were grown by both vapor–liquid–solid and vapor–solid mechanisms. Large SiC foam bodies without crack could be prepared as the total shrinkage during pyrolysis and reaction sintering was only ~30 vol%. The relatively low compressive strength (0.06–0.41 MPa) and Young's modulus (14.9–24.2 MPa) observed was due to the large cell size (1.1–1.6 mm) and high porosity (93%–96%).     

Sustainable Drilling of Nano SiC Reinforced Al Matrix Composites Using MQL and Cryogenic Cooling for Achieving the Better Surface Integrity

Silicon - Metal Matrix Nano Composites (MMNCs) are progressive alternatives of formal metal materials, are presently accomplishing a growing inclination of research and engineering approaches for...     

Simultaneous multi-objective optimization of stainless steel clad layer on pressure vessels using genetic algorithm

Metal cladding is a process of depositing a filler material to enhance the surface properties of base material using a suitable welding process. In this work the clad specimens are produced by surfacing a layer of filler material using weld cladding process to minimize the heat loss across the walls of the pressure vessels. It is done by depositing a low thermal conductivity austenitic stainless steel grade of 316L on structural steel plates used for boiler construction using flux cored arc welding process. The experimental study is carried out as per design of experiments availed for five factors five levels central composite design using response surface methodology. The mathematical models are developed for the prediction of clad layer height, clad layer width and depth of penetration. These models are employed in formulating fitness functions for multi-objective optimization of clad layer dimensions using genetic algorithm (GA). The set of optimal solutions suggested by response surface optimizer and genetic algorithm are compared and discussed. Conformity tests are conducted to validate the prediction capability of developed models and optimum settings. Optimum clad layer dimensions have been arrived and optimized stainless steel clad specimen has been produced. The heat transfer analysis is planned to be conducted in the next phase. The findings can be used in energy efficient design of pressure vessels.     

Low Cost Porous Alumina with Tailored Microstructure and Thermal Conductivity Prepared using Rice Husk and Sucrose

This study demonstrates a cost‐effective way to fabricate porous ceramics with tailored porosity and pore microstructure using 5–40 wt% rice husk (RH) in <75 μm, 75–180 μm, 180–355 μm, 355–420 μm, and 420–600 μm size, as pore former. Sucrose, used as binder, also acted as a pore former. Porous alumina compacts with 20%–66% volume fraction porosity and 50–516 μm pore size (length) were successfully fabricated. Microstructure of samples reveal randomly oriented elongated coarse pores and fine pores (avg. size 4 μm), created during burnout of RH and sucrose, respectively. Samples with isolated and/or interconnected pores were fabricated using this process. Thermal conductivity of the samples prepared was measured using Transient Plane Source (TPS) technique. Thermal conductivity ranges from 1.2 to 24 W/mK. Experimental results agree closely with predictions made based on Effective Medium Theory (EMT) for a two‐phase system.     

Thin film composite sodium alginate membranes for dehydration of acetic acid and isobutanol

Dehydration of widely used organic solvents such as acetic acid (AA) and isobutanol (IB) is challenging tasks, which form close boiling mixtures with water. Sodium alginate (SA) thin film composite membranes were prepared and crosslinked with 2,4‐toluene diisocyanate (TDI) and glutaraldehyde for dehydration of IB and AA/water mixtures through pervaporation (PV). The crosslinked and uncrosslinked SA composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and universal testing machine for intermolecular interactions, crystalline nature, thermal stability, surface morphology, and tensile strength, respectively. At a feed composition of 98 wt % IB and 95 wt % AA aqueous solutions, the TDI crosslinked SA composite membrane exhibited separation factors of 3229 and 708 with reasonable fluxes of 0.021 and 0.012 kg m^?2 h^?1, respectively. The results obtained in the study for IB and AA systems were compared with other SA membranes reported in the literature. The membranes appeared to have potential for commercial PV ability to dehydrate the solvents up to desirable purity levels (>99%) and feasibility of preparing them in a composite form which would enable scale‐up into modular configurations. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40018.     

Exploring bioactive fraction of Sargassum wightii: In vitro elucidation of angiotensin-I-converting enzyme inhibition and antioxidant potential

Bioactive fraction of brown algae Sargassum wightii (SWE) was obtained using silica column chromatography and preparative Thin Layer Chromatography (TLC). FT-IR and LC–mass spectrometry ESI analysis revealed presence of various phlorotannins in the SWE. The IC₅₀ value of SWE was found to be 59.91, 51.04, and 55.21 μg/ml for scavenging of 2,2-diphenyl-1-picrylhydrazyl, 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid), and Ferric Reducing Antioxidant Power assay, respectively. SWE inhibited angiotensin-I-converting enzyme (ACE) in mixed-type manner with IC₅₀ value of 56.96 µg/ml and Ki value of 45 µg/ml. The dual function such as antioxidant and ACE inhibition of SWE warrants further study to understand the antihypertensive potential in vivo.     

Exploitation of microbial antagonists for the control of postharvest diseases of fruits: a review

Fungal diseases result in significant losses of fruits and vegetables during handling, transportation and storage. At present, post-production fungal spoilage is predominantly controlled by using synthetic fungicides. Under the global climate change scenario and with the need for sustainable agriculture, biological control methods of fungal diseases, using antagonistic microorganisms, are emerging as ecofriendly alternatives to the use of fungicides. The potential of microbial antagonists, isolated from a diversity of natural habitats, for postharvest disease suppression has been investigated. Postharvest biocontrol systems involve tripartite interaction between microbial antagonists, the pathogen and the host, affected by environmental conditions. Several modes for fungistatic activities of microbial antagonists have been suggested, including competition for nutrients and space, mycoparasitism, secretion of antifungal antibiotics and volatile metabolites and induction of host resistance. Postharvest application of microbial antagonists is more successful for efficient disease control in comparison to pre-harvest application. Attempts have also been made to improve the overall efficacy of antagonists by combining them with different physical and chemical substances and methods. Globally, many microbe-based biocontrol products have been developed and registered for commercial use. The present review provides a brief overview on the use of microbial antagonists as postharvest biocontrol agents and summarises information on their isolation, mechanisms of action, application methods, efficacy enhancement, product formulation and commercialisation.     

Analysis of blood and tissue in gallbladder cancer

Particle induced X-ray emission, particle induced γ-ray emission studies has been carried out to analyse normal and carcinoma tissues and blood samples of gallbladder of both sexes and seventeen trace elements namely Na, Mg, Al, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br and Pb were estimated in the tissue and blood samples. In the present study, concentration of Zn in the carcinoma gallbladder tissue is less than that of the normal gallbladder tissue. Tobacco habit could be one of the important factors to decrease the elemental concentrations in blood and tissue samples.