Heat Transfer in Continuous-Drive Friction Welding of Different Diameters

ABSTRACT

Heat transfer in friction welding of similar and dissimilar cylindrical rods with different diameters is considered in the present study. The governing equations are solved numerically using an explicit finite-difference technique to determine the temperature field for various values of geometric and thermal parameters. The values of the parameters in the problem are selected as a = 1, 2, 4 for the aspect ratio, r _k  = 0.25, 1, 4 for the thermal conductivities ratio, and B ₁ = 0.05, 0.01, 0.001 for the Biot number. The predicted temperature field is of similar form for all values of the parameters, but the radial and axial temperature gradients change at certain amounts for different values of parameters.     

Numerical Modeling of Biomass Pyrolysis—Heat and Mass Transport Models

We consider the pyrolysis of robinia pseudoacacia, which is a common material for biomass gasifiers. We formulate three models of the process, with increasingly detailed physics, best suited for different spatial scales from large to small. For each model, we perform numerical simulations of adaptable complexity and compare the results with the thermogravimetric analysis (TGA) experiments.     

Thermal Energy Storage Performance of Fatty Acids as a Phase Change Material

Thermal energy storage performance of fatty acids and a eutectic mixture as phase change materials (PCMs) has been investigated experimentally. The selected PCMs for this study were palmitic acid, myristic acid, stearic acid, and a mixture of stearic and myristic acids in eutectic combination ratio of 65.7 wt% myristic acid and 34.3 wt% stearic acid. The PCMs have a melting temperature range of 50.0°C to 61.20°C and a latent heat range of 162.0 J/g to 204.5 J/g. The inlet temperature and the mass flow rate of heat transfer fluid (HTF) were selected as experimental parameters to test the thermal energy storage performance of the PCMs. The transition times, temperature range, propagation of the solid-liquid interface, as well as heat flow rate characteristics of the employed cylindrical tube storage system were studied at varied experimental parameters. The experimental results show that the melting front moves to inward in the radial directions as well as in the axial directions from the top toward to the bottom of the PCM tube. It was observed that the convection heat transfer in the liquid phase plays an important role in the melting process. The changes in the studied HTF parameters have more effect on the melting processes than the solidification processes of the PCMs. The average heat storage efficiency calculated from data for all the PCMs is 51.5%, meaning that 48.5% of the heat actually was lost somewhere.     

Poly (hydroxyethyl methacrylate-glycidyl methacrylate) films modified with different functional groups: In vitro interactions with platelets and rat stem cells

Copolymerization of 2-hydroxyethylmethacrylate (HEMA) with glycidylmethacrylate (GMA) in the presence of α-α′-azoisobisbutyronitrile (AIBN) resulted in the formation of hydrogel films carrying reactive epoxy groups. Thirteen kinds of different molecules with pendant NH₂ group were used for modifications of the p(HEMA-GMA) films. The NH₂ group served as anchor binding site for immobilization of functional groups on the hydrogel film via direct epoxy ring opening reaction. The modified hydrogel films were characterized by FTIR, and contact angle studies. In addition, mechanical properties of the hydrogel films were studied, and modified hydrogel films showed improved mechanical properties compared with the non-modified film, but they are less elastic than the non-modified film. The biological activities of these films such as platelet adhesion, red blood cells hemolysis, and swelling behavior were studied. The effect of modified hydrogel films, including NH₂, (using different aliphatic CH₂ chain lengths) CH₃, SO₃H, aromatic groups with substituted OH and COOH groups, and amino acids were also investigated on the adhesion, morphology and survival of rat mesenchymal stem cells (MSCs). The MTT colorimetric assay reveals that the p(HEMA-GMA)-GA-AB, p(HEMA-GMA)-GA-Phe, p(HEMA-GMA)-GA-Trp, p(HEMA-GMA)-GA-Glu formulations have an excellent biocompatibility to promote the cell adhesion and growth. We anticipate that the fabricated p(HEMA-GMA) based hydrogel films with controllable surface chemistry and good stable swelling ratio may find extensive applications in future development of tissue engineering scaffold materials, and in various biotechnological areas.     

Adjustable band-pass filter with current active elements: two fully-differential and single-ended solutions

Four adjustable band-pass filtering solutions are presented and also compared in this paper. Two of them are suitable for single-ended signal processing and the other two are their fully-differential equivalents. Filters are built with two types of active elements. First is a simple current follower with multiple outputs and second is a current amplifier with adjustable current gain that is used to control the quality factor of each of filters. Dependency between gain and quality factor is direct in two cases or inverse in other cases and that is why the range of adjustability varies. Simulations with CMOS-transistor structures are included. Values of quality factor obtained for each of solutions are assessed.     

"Soft and rigid" dithiols and Au nanoparticles grafting on plasma-treated polyethyleneterephthalate

ABSTRACT: Surface of polyethyleneterephthalate (PET) was modified by plasma discharge and subsequently grafted with dithiols (1, 2-ethanedithiol (ED) or 4, 4'-biphenyldithiol) to create the thiol (-SH) groups on polymer surface. This "short" dithiols are expected to be fixed via one of -SH groups to radicals created by the plasma treatment on the PET surface. "Free" -SH groups are allowed to interact with Au nanoparticles. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrokinetic analysis (EA, zeta potential) were used for the characterization of surface chemistry of the modified PET. Surface morphology and roughness of the modified PET were studied by atomic force microscopy (AFM). The results from XPS, FTIR, EA and AFM show that the Au nanoparticles are grafted on the modified surface only in the case of biphenyldithiol pretreatment. The possible explanation is that the "flexible" molecule of ethanedithiol is bounded to the activated PET surface with both -SH groups. On the contrary, the "rigid" molecule of biphenyldithiol is bounded via only one -SH group to the modified PET surface and the second one remains "free" for the consecutive chemical reaction with Au nanoparticle. The gold nanoparticles are distributed relatively homogenously over the polymer surface.     

Development of Microsatellite Markers Using Pyrosequencing in Galium trifidum (Rubiaceae), a Rare Species in Central Europe

We identify a large number of microsatellites from Galium trfidum, a plant species considered rare and endangered in Central and Western Europe. Using a combination of a total enriched genomic library and small-scale 454 pyrosequencing, we determined 9755 contigs with a length of 100 to 6192 bp. Within this dataset, we identified 153 SSR motifs in 144 contigs. Here, we tested 14 microsatellite loci in 2 populations of G. trifidum. The number of alleles and expected heterozygosity were 1-8 (mean 3.2) and 0.00-0.876 (0.549 on average), respectively. The markers described in this study will be useful for evaluating genetic diversity within and between populations, and gene flow between G. trifidum populations. These markers could also be applied to investigate the biological aspects of G. trifidum, such as the population dynamics and clonal structure, and to develop effective conservation programs for the Central European populations of this species.     

Anion complexation by calix[4]arene-TTF conjugates

Calix[4]arenes bearing tetrathiafulvalene (TTF) moieties appended to the upper rim via the amidic functions were synthesized and used for ¹H NMR and UV/Vis complexation studies towards selected anions. It was found that the complexation affinity towards H₂PO₄⁻ dramatically depends on the substitution pattern of the calixarene moiety. As a result, the proximally disubstituted derivative has a complexation constant by two orders of magnitude higher than the distally disubstituted analogue. The differences between proximal and distal receptors were also documented by their behaviour during the oxidation of the attached TTF units.