Production and Characterization of Gelatin Spherical Particles Formed via Electrospraying and Encapsulated with Polyphenolic Antioxidants from <Emphasis Type="Italic">Momordica charantia</Emphasis>

This study dealt with the production and characterization of gelatin nanospheres and encapsulation with Momordica charantia, commonly known as bitter gourd fruit vegetable extract (BGE). The impact of encapsulation and increasing the encapsulate loading on various physiochemical characteristics of gelatin polymeric entities as well as antioxidative attributes of BGE was studied. Nanospheres were formed via an electrospraying process conducted at 20 kV, 0.5 mL/h, and 10 cm of voltage, flow rate, and emitter/collector distance, respectively. The spherical beads were encapsulated with BGE at 5 to 15% (w/w%) loading rate. Morphological analysis through scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrated that nanospheres could be successfully produced. Furthermore, nanosphere encapsulation of the extract was demonstrated in transmission electron microscope (TEM) micrographs. Spectroscopic analysis indicated no chemical interactions between core and wall materials. The thermal stability of encapsulated nanoparticles slightly increased and the glass transition temperature (T_g) disappeared due to increased crystallinity. Thermogravimetric graphs of encapsulated spherical beads, at all core loadings, showed an additional phase ranging from 138 to 249 °C, overlapping with the BGE’s main TGA degradation phase. The presence of this phase, which was absent from empty bead thermograms, confirmed encapsulation occurrence during electrospraying process. Furthermore, an average of 80% of antioxidative content and potency of the extract was conserved during the encapsulation process. Moreover, phenolic content and antioxidative activity of the encapsulated extract showed higher stability than extracts while stored at refrigerated and ambient conditions.     

Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load

An experimental investigation of the behaviour of reinforced concrete columns and a theoretical procedure for analysis of both short and slender reinforced and composite columns of arbitrarily shaped cross section subjected to biaxial bending and axial load are presented. In the proposed procedure, nonlinear stress–strain relations are assumed for concrete, reinforcing steel and structural steel materials. The compression zone of the concrete section and the entire section of the structural steel are divided into adequate number of segments in order to use various stress–strain models for the analysis. The slenderness effect of the member is taken into account by using the Moment Magnification Method. The proposed procedure was compared with test results of 12 square and three L-shaped reinforced concrete columns subjected to short-term axial load and biaxial bending, and also some experimental results available in the literature for composite columns compared with the theoretical results obtained by the proposed procedure and a good degree of accuracy was obtained.     

Visible-light photocatalytic activity of TiO2/ZnS nanocomposites prepared by homogeneous hydrolysis

Photocatalytic active TiO₂/ZnS composites were prepared by homogeneous hydrolysis of mixture of titanium oxo-sulphate and zinc sulphate in aqueous solutions with thioacetamide. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission microscopy (HRTEM) and electron diffraction (ED). The nitrogen adsorption–desorption was used for surface area (BET) and porosity determination. Diffuse reflectance UV/VIS spectra for evaluation of photophysical properties were recorded in the diffuse reflectance mode (R100) and transformed to an absorption spectra through the Kubelka–Munk function. The method of UV/VIS diffuse reflectance spectroscopy was employed to estimate band-gap energies of the prepared TiO₂/ZnS nanocomposites. The photoactivity of the prepared TiO₂/ZnS nanocomposites was assessed by the photocatalytic decomposition of Orange II dye in an aqueous slurry under irradiation of 255 nm, 365 nm and 400 nm wavelength. Under the same conditions, the photocatalytic activity of the commercially available photocatalyst (Degussa P25), the pure anatase TiO₂ and sphalerite ZnS were also examined. The composite sample having the highest catalytic activity was obtained by hydrolysis of mixture solutions 0.63 M TiOSO₄ and 0.08 M ZnSO₄ · 7H₂O.     

Rhizosphere characteristics of the arsenic hyperaccumulator Pteris vittata L. and monitoring of phytoremoval efficiency

Recently discovered As-hyperaccumulator ferns hold promise for phytoremediation of As-polluted soils. We investigated changes in the rhizosphere characteristics of Pteris vittata (Chinese Brake fern) relevant for its use in phytoextraction. Plants were grown in rhizoboxes filled with soil containing 2270 mg kg(-1) As. Dissolved organic carbon (DOC) concentrations in rhizosphere soil solution were increased by 86% and appeared to enhance total Fe solubility due to complexation reactions. Despite substantial removal of As by the fern, As was not significantly decreased in the rhizsophere soil solution after one cropping, apparently due to the large buffer capacity of the soil and possibly because of ion competition with DOC. However, the difference between 0.05 M (NH4)2SO4-extractable labile As in bulk and rhizosphere soil accounted for 8.9% of total As accumulated in the fern, indicating that As was mainly acquired from less available pools. Moreover, As depletion in the rhizosphere and limited resupply from less available pools were indicated by a 19.3% decreased As flux, measured using the technique of diffusive gradients in thin films (DGT). Modeling of the DGT-soil system was able to show that the rate of release from solid phase to solution in the rhizosphere was one-third of that in the bulk soil. Applying the remedial strategy of bioavailable contaminant stripping, which aims at diminishing the phytoavailable pollutant fraction, DGT can be used as a monitoring tool to evaluate the efficiency of phytoextraction and to study the potential resupply of bioavailable pools after phytoextraction has ceased.     

Effect of fuels and domestic heating appliance types on emission factors of selected organic pollutants

This study reports on the first complex data set of emission factors (EFs) of selected pollutants from combustion of five fuel types (lignite, bituminous coal, spruce, beech, and maize) in six different domestic heating appliances of various combustion designs. The effect of fuel as well as the effect of boiler type was studied. In total, 46 combustion runs were performed, during which numerous EFs were measured, including the EFs of particulate matter (PM), carbon monoxide, polyaromatic hydrocarbons (PAH), hexachlorobenzene (HxCBz), polychlorinated dibenzo-p-dioxins and furans (PCDD/F), etc. The highest EFs of nonchlorinated pollutants were measured for old-type boilers with over-fire and under-fire designs and with manual stoking and natural draft. Emissions of the above-mentioned pollutants from modern-type boilers (automatic, downdraft) were 10 times lower or more. The decisive factor for emission rate of nonchlorinated pollutants was the type of appliance; the type of fuel plays only a minor role. Emissions of chlorinated pollutants were proportional mainly to the chlorine content in fuel, but the type of appliance also influenced the rate of emissions significantly. Surprisingly, higher EFs of PCDD/F from combustion of chlorinated bituminous coal were observed for modern-type boilers (downdraft, automatic) than for old-type ones. On the other hand, when bituminous coal was burned, higher emissions of HxCBz were found for old-type boilers than for modern-type ones.     

Electronically controlled oscillator with linear frequency adjusting for four‐phase or differential quadrature output signal generation

This paper introduces novel four‐phase oscillator employing two Dual‐Output Controlled Gain Current Follower Buffered Amplifiers (DO‐CG‐CFBAs), single Current Amplifier, three resistors, and two grounded capacitors suitable for differential quadrature signal production (floating outputs). To control the frequency of oscillation (FO) and condition of oscillation (CO), only the current gain adjustment of active elements is used. The circuit was designed by well‐known state variable approach. The oscillator employs three active elements for linear control of FO and to adjust CO and provides low‐impedance voltage outputs. Furthermore, two straightforward ways of automatic amplitude gain control were used and compared. Active elements with very good performance are implemented to fulfill required features. Suitable CMOS implementation of introduced DO‐CG‐CFBA was shown. Important characteristics of the designed oscillator were verified experimentally and by PSpice simulations to confirm theoretical and expected presumptions. Copyright © 2013 John Wiley & Sons, Ltd.     

Interference mitigation in WSN by means of directional antennas and duty cycle control

Network spanning algorithms, such as ZigBee‐native and Stojmenovič, constitute a crucial element in the wireless sensor network design, by determining its potential for reliability and fault‐tolerance. The interconnections between nodes have a great impact on the radio interference level present in such a network and may create a serious electromagnetic compatibility issue in some cases. It can be proved that the total interference incurred by a statistical node can be diminished in two ways: either by using directional antennas or by setting an upper limit on the duty cycle of each network node. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigations into the mechanisms controlling parturition in cattle

A pronounced increase in fetal cortisol concentrations stimulating an increase in estrogen production at the expense of progesterone precursors in the placenta, luteolysis, and progesterone withdrawal is considered as a key event during the complex signal cascade leading to the initiation of parturition in cattle. However, there are many questions concerning the exact functional and/or temporal relationships between these individual processes which finally result in the expulsion of the calf and the timely release of the placenta. Thus, parturition was induced in 270-day pregnant cows using the progesterone receptor blocker aglepristone (group AG, n=3), the prostaglandin F(2α) analog cloprostenol (group PG, n=4), and the glucocorticoid dexamethasone (group GC, n=4) to characterize the effect on maternal steroid and prostaglandin levels and to identify immediate subsequent changes in placental morphology and gene expression as compared with untreated controls sampled on day 272 (group D272, n=3) and cows during normal parturition (group NT, n=4). All calves of the treatment groups were born on days 271-272, whereas gestational length in NT cows was 280.5±1.3 days. However, none of the treatments significantly induced the prepartal remodeling of placentomes characterized by a decline in trophoblast giant cells and reduction of the caruncular epithelium. Data on placental CYP17 and COX2 expression confirm that these key enzymes are upregulated by GC, whereas placental aromatase expression was not affected by any treatment. Maternal progesterone and prostaglandin profiles suggest differential effects of the treatments on luteal function and placental or uterine prostaglandin production. The results provide new information on the initiation of parturition in cattle but raise many new questions.