Adsorption properties of a chelating resin containing hydroxy group and iminodiacetic acid for copper ions

A chelating resin, PSGI, was synthesized by the radical polymerization of GMA‐IDA, DVB, and styrene for the removal of Cu(II), Co(II), and Cd(II) from an aqueous solution. The characteristic functional groups and chemical composition of PSGI were analyzed by Fourier transform infrared spectroscopy and elemental analysis of C, H, and N. The equilibrium adsorption capacities of PSGI from their single‐metal ion solutions were 1.46 mmol/g for Cu(II), 1.02 mmol/g for Co(II), and 1.10 mmol/g for Cd(II). The adsorption isothermal of Cu(II) by PSGI followed the Langmuir isotherm. Increasing the concentration (0–0.1 M) of KCl in Cu(II) solution affected the adsorption behavior slightly. Within the pH range of 2–5.5, decreasing the pH of the Cu(II) solution did not produce remarkable changes in the equilibrium adsorption capacities. The adsorption capacities of PSGI for Cu(II) did not cause significant change during the repeated adsorption–desorption operations. The competitive adsorption tests verified that this resin had good adsorption selectivity for Cu(II) with the coexistence of Co(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2123–2130, 2004     

Preparation of micron‐size monodispersed PS/P(St/MAA) microspheres by seeded dispersion polymerization

Uniform polystyrene (PSt) particles with the size of 1.9 μm were first prepared via dispersion polymerization, and then used as the seeds in a second‐stage dispersion copolymerization of styrene (St) and methacrylic acid (MAA) to produce carboxyl‐carrying microspheres. The PSt seed particles were swollen by monomer mixture of St and MAA, including an oil‐soluble initiator 2,2′‐azobisiso‐butyronitrile (AIBN), before polymerization. Finally, uniform PS/P(St/MAA) (polydispersity index, PDI = 1.02) microspheres with the size of 2.2 μm were obtained. The average particle size and size distribution of the final microspheres were investigated. MAA contents between 54 and 97 mg/g were detected from the PS/P(St/MAA) particles produced under different conditions. Dispersion medium has great influence on the kinetics of polymerization, due to its effect on the partitioning of monomers, solvents, and initiator in the particle phase, probably as well as on the conformation of the dispersion agent on the surface of the particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3586–3591, 2006     

A Novel Inorganic Polymer as Cathode Material for Secondary Lithium Batteries

Summary: This paper introduces a new inorganic poly(phosphazene disulfide) material. With unique element composition and molecular structure, the polymer has noncombustible safety and preferable conductivity. When used as cathode material for rechargeable lithium batteries, the polymer's first discharge capacity is as high as 467.9 mAh · g^?1, which can be retained at 409.9 mAh · g^?1 after 60 repeated cycles. Therefore, it has a great application potential in the field of lithium batteries.

Replacement of the Cl atoms by S? S groups by refluxing Na₂S₂ and linear poly(dichloro‐phosphazene).     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. II. Volume shrinkage characteristics and internal pigmentability

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride) with different chemical structures and MWs on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during curing were investigated by an integrated approach of static phase characteristics of the ternary styrene (ST)/UP/LPA system, reaction kinetics, cured‐sample morphology, microvoid formation, and property measurements. The relative volume fraction of microvoids generated during the cure was controlled by the stiffness of the UP resin used, the compatibility of the uncured ST/UP/LPA systems, and the glass‐transition temperature of the LPAs used. On the basis of the Takayanagi mechanical model, the LPA mechanism on volume shrinkage control, which accounted for phase separation and microvoid formation, and factors leading to both a good volume shrinkage control and acceptable internal pigmentability for the molded parts are discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3388–3397, 2004     

CO2‐assisted polymer processing: A new alternative for intractable polymers

CO₂‐assisted polymer processing is proposed as an alternative route for intractable and high molecular weight polymers based on the plasticization effects of CO₂ and its direct effect on the melting behavior of semicrystalline polymers. A modified processing system was used to process a variety of polymers in the presence of high‐pressure CO₂. The system includes an extruder that was modified to allow for high pressures created by the injection of CO₂. The new design includes a modified feed section that allows a given mass of polymer to interact with CO₂ before and during the extrusion process. The inherent shear mixing and the presence of CO₂ allow for a specific control over the extrudate morphology. Results suggest that this alternative design provides a new and easy route to melt process high melt viscosity polymers of commercial importance, such as polytetrafluoroethylene (PTFE), fluorinated ethylene propylene copolymer (FEP), and syndiotactic polystyrene (s‐PS). The increased processability of these systems in CO₂ is related to the plasticization effect of CO₂ that was quantified through a depression in the glass‐transition temperature according to the Chow model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1501–1511, 2004     

Properties of modified polyacrylonitrile membranes prepared by copolymerization with hydrophilic monomers for water–ethanol mixture separation

A new kind of terpolymer membrane was employed to separate a permselective water–alcohol mixture. This membrane was prepared via the copolymerization of acrylonitrile, sodium salt styrene sulfonic acid (SStSA), and hydroxyethyl methacrylate in dimethylsulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism, resultant structure, and polymer composition were confirmed by IR and elemental analysis. The effects of the feed composition on the polymer composition, mechanical properties, thermal properties, and degree of swelling were investigated. It was found that water permeated through the membrane preferentially in a water/alcohol system. The flux increased with the increase of SStSA, but the separation factor decreased drastically with higher SStSA. For a 50 wt % water–ethanol mixture, a flux of 0.65 kg/m² h and a separation factor of 212 were obtained at 30°C when the membrane containing the highest SStSA content was used. The capacities of the metal ions absorbed by the membranes were investigated in the study. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 244–250, 2003     

Polymerization Catalysis in Liquid Propylene: High Activities and Molecular Weights in Propylene/CO Copolymerization Reactions

Summary: The dicationic [(dppp)Pd(NCCH₃)₂](BF₄)₂ catalyst (dppp = 1,3‐bis(diphenylphosphino)propane) was applied in a liquid monomer, two phase process for the CO/propene copolymerization reaction. For the first time it was possible to synthesize propene/CO copolymers with an activity up to 7 500 g/(mol · h) and molecular weights of 500 000 g/mol. Activities up to 40 000 g/(mol · h) could be obtained with the use of the unsymmetric catalyst [(CF₃‐dppp)Pd(NCCH₃)](BF₄)₂ (CF₃‐dppp = 1‐diphenylphosphino‐3‐bis[3,5‐di(trifluormethyl)phenyl]phosphinopropane) in homogeneous liquid propene solution.

Granules found after copolymerization.     

Synthesis and dielectric properties of polystyrene‐clay nanocomposite materials

Polystyrene‐clay nanocomposite (PsCN) materials were synthesized and their properties of crystallinity, thermal behavior, and dielectric characteristics were investigated. A polymerizable cationic surfactant, [2‐(dimethylamino)ethyl]triphenylphonium bromide, was used for the intercalation of montmorillonite (MMT). The organophilic MMT was prepared by Na⁺‐exchanged MMT and ammonium cations of a cationic surfactant in an aqueous medium. Organophilic styrene monomers were intercalated into the interlayer regions of organophilic clay hosts followed by a free‐radical polymerization. Exfoliation to 2 wt % MMT in the polystyrene (PS) matrix was achieved as revealed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were also studied. The dielectric properties of PsCNs in the form of film with clay loading from 1.0 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 25–70°C. A decreased dielectric constant and low dielectric loss were observed for PsCN materials. The dielectric response at low frequency that originated from dipole orientation was suppressed due to the intercalation of clay materials. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1368–1373, 2004     

Preparation and the properties of PMR‐type polyimide composites with aluminum nitride

A new polyimide composite was developed relying on the concept of in situ polymerization of monomer reactants polyimide. High thermal conductive, low dielectric constant and dielectric loss, and thermal‐stable composites were successfully demonstrated by incorporating aluminum nitride powder into the polyimide. The weight percent of aluminum nitride was up to 80%. The thermal and dielectric properties follow the classic composite theories. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3913–3917, 2003