Structural changes of glass-ceramics of the Cu2O-Al2O3-SiO2 system on heating in air

The behaviour of copper ions in low thermal expansion glass-ceramics prepared from Cu₂O · Al₂O₃ ·_nSiO₂ glasses, or in-spodumene type Cu₂O · Ae₂O₃ ·nSiO₂ crystals included in the glass-ceramics on heating in air was investigated. On hewing at 300 to 500° C, the copper ions behaved as in the corresponding glasses. Cuprous ions in the glass-ceramics or-spondumene type crystals were oxidized into the cupric state, and at the same time an equal amount of cuprous ions to those oxidized were expelled out of the specimen for the requirement of electrical charge neutrality and then reacted with oxygen to form CuO on the surface. The oxidation of cuprous ions and the decrease of the copper content of the-spondumene type crystals brought about a considerable decrease in the lattice spooings.     

Copper ⇌ Alkali Ion Exchange of Alkali Aluminosillcate Glasses in Copper-Containing Molten Salt: I, Monovalent Copper Salt, CuCl

Cu⁺⇌ R⁺ (R = Li, Na, and K) ion exchange experiments were conducted for 20R₂O·10Al₂O₃·70SiO₂ glasses in molten CuCl at 550°C in air and nitrogen atmospheres. The depth profiles of the copper incorporated into glasses were determined with an electron microprobe X-ray analyzer. The total amount of diffusing copper, M _t, strongly depended on the type of alkali ion in the glass and the ion-exchange atmosphere; i.e., M _t increased with increasing cationic size in the order Li < Na < K and M _t was greater in air than in nitrogen. The Cu ⇌ R⁺ ion exchange kinetics are discussed in detail.     

Relative reactivity of hydrogen donor solvent in coal liquefaction

Hydrogen transfer from donor solvent to coal must involve reactions such as hydrogen donation to free radicals and hydrogenation of aromatic structures. The relative reactivities of five typical hydrogen donor solvents, more reactive than tetralin, were determined using a competing elimination reaction in the liquefaction of a bituminous coal at 400 °C and a brown coal at 350 °C. 9,10-Dihydroanthracene, 9,10-dihydrophenanthrene and 1,2,3,4-tetrahydroquinoline exhibited outstanding hydrogen donating ability. Further, the relative reactivities of five mild hydrogen donor solvents such as acenaphthene and indan were determined by a similar elimination reaction using a bituminous coal at 450 °C.     

Nitridation of the Sol–Gel-Derived Titanium Oxide Films by Heating in Ammonia Gas

Dip-coated sol–gel-derived TiO₂ films on an alumina substrate were converted to nonstoichiometric titanium nitride (TiN _x ( x ≦ 1)) films by heating at approxmately 1000°C in NH₃ gas. TiO₂ films made from TiO₂ sols prepared from Ti(O– i -C₃H₇)₄ and stabilized by diethanolamine were more easily nitrided than those from sols containing HCl as a deflocculant reagent. This appears to be a result of the more porous structure of the former films.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Discussions of worker ants’ rule-based CHC dealing with changing environments

Contrary to popular belief, biologists discovered that worker ants are really not all hardworking. It has been found that in three separate 30-strong colonies of black Japanese ants (Myrmecina nipponica), about 20% of worker ants are diligent, 60% are ordinary, and 20% are lazy. That is called 20:60:20 rule. Though they are lazy, biologists suggested that lazy worker ants could be contributing something to the colony that is yet to be determined. In our last research, we used CHC (cross generational elitist selection, heterogeneous recombination, and cataclysmic mutation) with the worker ants’ rule (WACHC) aiming at solving optimization problems in changing environments. CHC is a nontraditional genetic algorithm (GA) which combines a conservative selection strategy that always preserves the best individuals found so far with a radical (highly disruptive) recombination operator. In our last research, we verified that WACHC performs better than CHC in only one case of fully changing environment. In this paper, we further discuss our proposed WACHC dealing with changing environment problems with varying degree of difficulty, compare our proposal with hypermutation GA which is also proposed for dealing with changing environment problems, and discuss the difference between our proposal and ant colony optimization algorithms.     

Inchworm robot grippers for clothes manipulation

Manipulating deformable objects like clothes, plastic, and paper by a robot is very challenging. This paper focuses on clothes manipulation as an example. A tracing manipulation method is used here to find a corner of the clothes. In this paper, tracing refers to tracing the clothes’ edge, with the robot’s movement based on feedback from sensors. One difficulty during this edge tracing is to make the robot trace smoothly and speedily without dropping the clothes in the process. This is due to the fact that deformable objects are sensitive to contact forces. A solution to this problem is to design a special robot gripper that can trace the clothes without having to worry about the clothes slipping away. In this paper, the development of inchworm-type grippers is proposed. Two sets of grippers inside a robot hand will allow the robot to trace the clothes more freely because there will always be a gripper firmly holding the clothes at any time. A unique tracing method for towel spreading using the inchworm grippers is also discussed. Experimental results have demonstrated the effectiveness of both the proposed grippers and also the algorithm. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Size of plastic region owing to blunting of the precrack tip andJ lc value in several types of structural steels

In this study, a three-point bendJ _lc fracture-toughness test was carried out using four types of structural steels at room temperature. The values of (γ _p)V, which represent the width of the region where the voids are located just ahead of the crack tip, were measured by Beacham's method [9] with the help of a scanning electron microscope (SEM). The experimental (γ _p) values and the theoretical values obtained using the finite element method (FEM) or calculated fromK at initiation are in good agreement. It was found that there is a certain linear relationship between (γ _p)Vand the stretched zone width (SZW), and an experimental relationship betweenJ _lc andσ _flow·(γ _p)V which may be expressed by the following equation: $$J_{lc} = 44.1 + 0.35\sigma _{{\text{flow}}} \cdot (\gamma _{\text{p}} )V_c KJ$$ whereσ _flow is the average value of the yield stress and the ultimate tensile strength. (γ _p)V _c represents the critical value of (γ _p)V. The numerical constant 44.1 kJ m^?2 is considered to be aJ _lc value for brittle fracture of the material tested, according to the authors' previous results. It is possible to calculateJ _lc if (γ _p)V _c can be measured.     

Electro-oxidation of dimethyl ether on Pt/C and PtMe/C catalysts in sulfuric acid

The electro-oxidation of dimethyl ether (DME) on PtMe/Cs (Me = Ru, Sn, Mo, Cr, Ni, Co, and W) and Pt/C electro-catalysts were investigated in an aqueous half-cell, and compared to the methanol oxidation. The addition of a second metal enhanced the tolerance of Pt to the poisonous species during the DME oxidation reaction (DOR). The PtRu/C electro-catalyst showed the best electro-catalytic activity and the highest tolerance to the poisonous species in the low over-potential range (<0.55 V, 50 °C) among the binary electro-catalysts and the Pt/C, but at the higher potential (>ca. 0.55 V, 50 °C), the Pt/C behaved better than PtRu/C. The apparent activation energy for the DOR decreased in the order: PtRu/C (57 kJ mol⁻¹) > Pt₃Sn/C (48 kJ mol⁻¹) ≈ Pt/C (46 kJ mol⁻¹). On the other hand, the activation energy for the MOR showed a different turn, decreased in the following order: Pt/C (43 kJ mol⁻¹) > Pt₃Sn/C (35 kJ mol⁻¹) ≈ PtRu/C (34 kJ mol⁻¹). The temperature dependence of the DOR was greater than that of the oxidation of methanol (MOR) on the PtRu/C.     

Wide-gap layered oxychalcogenide semiconductors: Materials, electronic structures and optoelectronic properties

Applying the concept of materials design for transparent conductive oxides to layered oxychalcogenides, several p-type and n-type layered oxychalcogenides were proposed as wide-gap semiconductors and their basic optical and electrical properties were examined. The layered oxychalcogenides are composed of ionic oxide layers and covalent chalcogenide layers, which bring wide-gap and conductive properties to these materials, respectively. The electronic structures of the materials were examined by normal/inverse photoemission spectroscopy and energy band calculations. The results of the examinations suggested that these materials possess unique features more than simple wide-gap semiconductors. Namely, the layered oxychalcogenides are considered to be extremely thin quantum wells composed of the oxide and chalcogenide layers or 2D chalcogenide crystals/molecules embedded in an oxide matrix. Observation of step-like absorption edges, large band gap energy and large exciton binding energy demonstrated these features originating from 2D density of states and quantum size effects in these layered materials.