Scintillation Properties of 6LiI(Eu) in Cryogenic Temperatures

We measured emission wavelength spectra, scintillation decay time and scintillation light yield of ⁶LiI(Eu) in the temperature range from 4.2?K to 300?K. We observed that the scintillation decay time was almost constant (1.3?μs) below 100?K. At 4.2?K the light yield was found to increase to 6 times higher than that at 300?K. The ⁶LiI(Eu) is expected to be utilized for spectroscopic measurement of fast neutrons by operating at 4.2?K.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Effects of solid lubricants in backward extrusion

In the present paper, some solid lubricants were tested in backward extrusion friction tests with flat-headed punches using aluminium at room temperature. The results showed that anti-seizure ability was improved when wax was added to the solid lubricant samples. In addition, a water-based graphite lubricant and an ultrahigh molecular weight polyethylene (UHMW-PE) lubricant were tested using aluminium workpieces heated to 500°C. The lubricity of the UHMW-PE lubricant was found to be superior to that of the graphite lubricant.     

The Potential Role of Hepatocyte Growth Factor in Degenerative Disorders of the Synovial Joint and Spine

This paper aims to provide a comprehensive review of the changing role of hepatocyte growth factor (HGF) signaling in the healthy and diseased synovial joint and spine. HGF is a multifunctional growth factor that, like its specific receptor c-Met, is widely expressed in several bone and joint tissues. HGF has profound effects on cell survival and proliferation, matrix metabolism, inflammatory response, and neurotrophic action. HGF plays an important role in normal bone and cartilage turnover. Changes in HGF/c-Met have also been linked to pathophysiological changes in degenerative joint diseases, such as osteoarthritis (OA) and intervertebral disc degeneration (IDD). A therapeutic role of HGF has been proposed in the regeneration of osteoarticular tissues. HGF also influences bone remodeling and peripheral nerve activity. Studies aimed at elucidating the changing role of HGF/c-Met signaling in OA and IDD at different pathophysiological stages, and their specific molecular mechanisms are needed. Such studies will contribute to safe and effective HGF/c-Met signaling-based treatments for OA and IDD.     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Evaluation of 9-cis retinoic acid for a new remedy of human retinoblastoma

We investigated the effect of two isomers of retinoic acid (RA), all-trans RA and 9-cis RA, on the proliferation of Y79 human retinoblastoma cells. The two isomers inhibited the cell proliferation in a concentration-dependent manner. The IC50 for this inhibition by all-trans RA and 9-cis RA was 1.50 and 0.15 microM, respectively. The inhibitory effect of 9-cis RA on Y79 cell growth was observed within 24 hr, thereafter the cell number was gradually decreased. In contrast, no inhibition by all-trans RA of Y79 cell growth was observed within 24 hr, thereafter the cell number was slightly increased. In these cases, the cell viability at 4 days after the addition of 9-cis RA and all-trans RA was more than 90% and 95%, respectively. These results indicate that the two RA inhibit the proliferation of Y79 human retinoblastoma cells without inducing the cell death and that the effect of 9-cis RA on the inhibition of Y79 cell growth is much greater than that of all-trans RA.     

High-strength–high-modulus polyimide fibers II. Spinning and properties of fibers

The polyimides based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) described in Part I of this series were dissolved in p-chlorophenol and spun into fibers using a coagulating bath of ethanol. The fibers as spun had in general low tenacities and low moduli, but a heat treatment at 300–500°C under tension produced a remarkable increase in strength and modulus, and fibers with a tensile strength of 26 g/den (3.1 GPa) and an initial modulus higher than 1,000 g/den (120 GPa) could be obtained. Thus, the annealed fibers of polyimides are comparable to aramid fibers in mechanical properties. To heating in air and in the saturated steam, the polyimide fibers showed higher resistance than the aramid fibers. The polyimide fibers surpassed the aramid fibers in resistance to acid treatment and ultraviolet (UV) irradiation, but were inferior in resistance to alkali treatment. The annealed fibers of polyimides displayed distinct X-ray diffraction patterns. The chain repeat distance of 20.5 Å determined on the fibers of polyimide prepared from BPDA and o-tolidine, and 20.6 Å determined on the fibers of polyimide derived from BPDA and 3,4′-diaminodiphenyl ether are reasonable when the dimensions of monomeric units and the shapes of the molecular chains are considered. The X-ray reflections of both polyimide fibers were indexed satisfactorily on the basis of postulated unit cells.     

Radiation-induced polymerization of ethylene in a pilot plant. I. Bulk process

Radiation-induced bulk polymerization of ethylene was carried out with use of a pilot plant with a 10 liter reactor at pressures of 225–400 kg/cm², temperatures of 30–95°C, ethylene feed rates of 5–28 kg/hr, and dose rate of 3.8 × 10⁵ rad/hr. Characteristics of the process are mild polymerization conditions and capability of producing medium density polyethylene in powder form. The spacetime yield and molecular weight of polymer were in the range of 3.5 to 13.1 g/liter hr and 2.2 × 10⁴ to 14 × 10⁴, respectively. The space-time yield increased with mean residence time and 2.4 powders of pressure, and decreased with temperature. Molecular weight changed similarly with the reaction conditions. These results were consistent with those of the bench plant experiment and the scale effect was small. Polymer deposit to the reactor wall limited a period of continuous operation of the plant. The amount of deposited polymer was increased with the square of reaction time. The rate of polymer deposit was proportional to polymer concentration and to the cube of pressure. The polymer deposit cannot be solved in the bulk process.