Combined multidimensional signaling and transmit diversity forhigh-rate wide-band CDMA

Multidimensional signaling is newly designed to provide a diversity gain of order 2 using two transmit antennas in uplink transmission of wide-band CDMA (W-CDMA) while achieving high and multiple data rates at the same time. The rate can be easily changed on the slot basis in a frame transmission by adapting the order of multidimensional signaling to the incoming traffic. The multidimensional signaling of order zero simply reduces to conventional multicode scheme, so there exists a tradeoff between rate and complexity. Also, the use of multidimensional signaling results in far reduced envelope variations at the maximum rate. With the transmit diversity, the uplink signal-to-interference ratio (SIR) will be further stabilized to meet the requirements of multimedia traffic. Statistics of interferences are characterized in terms of their second- and fourth-order moments from which diversity gain is theoretically verified. For realistic multipath fading channels, considering both equal and unequal average path powers, the average probability of symbol error is obtained in compact form, in which the two schemes, multidimensional signaling with and without transmit diversity are compared, and then with nonmulticode scheme in view of the bit error rate (BER). Numerical and simulation results show that the multidimensional signal with transmit diversity provides a significant gain over that with no diversity, and furthermore outperforms nonmulticode scheme subject to the same signal energy per bit and chip rate     

A robust timing and frequency synchronization for OFDM systems

A robust symbol-timing and carrier-frequency synchronization scheme applicable to orthogonal frequency-division-multiplexing systems is presented. The proposed method is based on a training symbol specifically designed to have a steep rolloff timing metric. The proposed timing metric also provides a robust sync detection capability. Both time domain training and frequency domain (FD) training are investigated. For FD training, maintaining a low peak-to-average power ratio of the training symbol was taken into consideration. The channel estimation scheme based on the designed training symbol was also incorporated in the system in order to give both fine-timing and frequency-offset estimates. For fine frequency estimation, two approaches are presented. The first one is based on the suppression of the interference introduced in the frequency estimation process by the training symbol pattern in the context of multipath dispersive channels. The second one is based on the maximum likelihood principle and does not suffer from any interference. A new performance measure is introduced for timing estimation, which is based on the plot of signal to timing-error-induced average interference power ratio against the timing estimate shift. A simple approach for finding the optimal setting of the timing estimator is presented. Finally, the sync detection, timing estimation, frequency estimation, and bit-error-rate performance of the proposed method are presented in a multipath Rayleigh fading channel.     

Dynamic rate adaptation based on multidimensional multicode DS-CDMA in cellular wireless networks

Dynamic rate adaptation for uplink data transmission in a cellular multidimensional multicode (MDMC) direct-sequence code-division multiple-access packet data network is modeled and analyzed. An analytical framework is developed to evaluate the performances of radio link level dynamic rate adaptation schemes under multipath fading and log-normal shadowing. The radio link level throughput under optimal dynamic rate adaptation (having exponential computational complexity) and different heuristic-based suboptimal rate adaptation schemes can be assessed under the presented analytical framework. The performance of MDMC signaling is compared with that of the single-code variable spreading factor (VSF) signaling. To this end, based on an equilibrium point analysis of the system in steady-state, a base station-assisted and mobile-controlled dynamic rate adaptation scheme is presented.     

Structural Properties of Boron-Doped Germanium-Tin Alloys Grown by Molecular Beam Epitaxy

Boron-doped Ge_1?x Sn _x alloys with atomic fractions of tin up to x = 0.08 were grown on n-Ge(001) substrates using solid-source molecular beam epitaxy, in order to study their structural properties. The total boron concentration in the alloys was ~ 10¹⁸ cm^?3 as measured by secondary-ion mass spectroscopy, which also indicated low amounts of impurities such as carbon and oxygen. More than 90% of the Sn atoms occupied substitutional lattice sites in the alloy as determined by Rutherford backscattering spectrometry. High-resolution x-ray diffraction showed that the boron-doped Ge_1?x Sn _x alloys were single crystals that were completely strained with low defect densities and coherent interfaces for thickness up to 90 nm, and for Sn composition of 8%. The boron-doped Ge_1?x Sn _x /n-Ge formed p–n junctions with conventional rectifying characteristics, indicating that the boron produced electrically active acceptor states.     

Efficient Broadcasting in Mobile Ad Hoc Networks

This paper presents two efficient flooding algorithms based on 1-hop neighbor information. In the first part of the paper, we consider sender-based flooding algorithms, specifically the algorithm proposed by Liu et al. In their paper, Liu et al. propose a sender-based flooding algorithm that can achieve local optimality by selecting the minimum number of forwarding nodes in the lowest computational time complexity O(n logn), where n is the number of neighbors. We show that this optimality only holds for a subclass of sender-based algorithms. We propose an efficient sender-based flooding algorithm based on 1-hop neighbor information that reduces the time complexity of computing forwarding nodes to O(n). In Liu's algorithm, n nodes are selected to forward the message in the worst case, whereas in our proposed algorithm, the number of forwarding nodes in the worst case is 11. In the second part of the paper we propose a simple and highly efficient receiver-based flooding algorithm. When nodes are uniformly distributed, we prove that the probability of two neighbor nodes broadcasting the same messageneighbor nodes broadcasting the same message exponentially decreases when the distance between them decreases or when the node density increases. The analytical results are confirmed using simulation.     

Graphene oxide nanoflakes from various agrowastes

Nowadays, the synthesis of graphene/ graphene oxide from graphite precursor using oxidizing agents is the most common procedure, but the direct synthesis of graphene or graphene oxide from a non-graphitic carbonaceous material without using inert atmosphere is really a great challenge. Besides, the chemistry behind the development of graphitic structure from a non-graphitic material during the thermal heating is still not clearly understood. In this research work, three agrowaste materials viz. rice husk, sugarcane bagasse and newspaper were selected and subjected to pyrolysis in presence of trace amount of air. The continued heating at the optimum temperature has resulted in aromatization and condensation along with the oxidation within the cellulosic structure of the agrowaste, which finally resulted in the formation of graphene oxide nanoflakes directly. The mechanism of formation of graphene oxide from these agrowaste materials was studied, which suggested that any carbonaceous waste materials can be converted to graphene oxide by optimizing the thermal heating conditions.     

Torsion problem for elastic cylinder with holes

An integral equation method is given to solve the classical torsion problem in elasticity theory for a multiply connected region. As is well known, the solution depends upon finding the solution of the two-dimensional Laplace's equation which takes the value $\text{1}\text{2}$(x²+y²)+c_i on the boundary, where x,y are the usual Cartesian coordinates, and c_i are unknown constants. The usual approaches are extremely cumbersome. In this paper a new approach is suggested to solve such problems. This method is simple and straightforward and requires the solution of simultaneous linear equations. An example is given which substantiates the theory. The method is very general and can take into account the discontinuity in the displacement component w. The result can therefore be applied to dislocation theory.     

Cost analysis of recovery block scheme and its implementation issues

In this paper, a cost analysis of recovery block scheme has been presented. This study provides us the selection criterion for alternates and the software granularity under perfect acceptance tests. Two performance evaluation measures: a) cost-reliability index (CRI); b) cost of failure (COF) are studied and compared. CRI is shown to be a move restricted measure than COF. An experimental study has been carried out to supplement the analysis. Efficient placement of recovery blocks and the design of alternates has been discussed with reference to real-time applications.This work has been carried out under contract DOT-RC-92031.     

Phase and microstructural evolution in lithium silicate glass-ceramics with externally added nucleating agent

Development of lithium disilicate-based glass-ceramics critically depends on use of nucleating agent in the glass matrix. The present study reports the effect of externally added nucleating agent Li₃PO₄ in Li₂O–K₂O–MgO–ZnO–ZrO₂–Al₂O₃–SiO₂ system which is compared with a reference composition (GC1) (SiO₂:Li₂O = 2.16:1) prepared with in situ formed Li₃PO₄. For externally added Li₃PO₄, two compositions were studied. In one case (GC2) before addition of Li₃PO₄, SiO₂:Li₂O ratio in glass was maintained as 2.87:1 and in another case (GC3) SiO₂:Li₂O ratio in glass was maintained same as reference GC1 that is, 2.16:1. The glasses were characterized by using MAS-NMR spectroscopy. Sintering and crystallization behavior of the glass-ceramics was characterized by using XRD, SEM, DTA. Due to in situ formation of Li₃PO₄, GC1 resulted in a dense sample with finer crystals of lithium disilicate. In GC2 and GC3, externally added lithium phosphate, which was in the form of ultrafine aggregated particles, formed flower-like colonies of radially outward crystals. Higher SiO₂:Li₂O ratio in GC2 resulted in lithium disilicate crystals and high viscous glass causing large air entrapment and so less densification. GC3 with higher lithia in glass showed higher densification than GC2 but only lithium metasilicate crystals were formed.