Utilization of the yarn pullout test in estimation of the reserved energy of rib knitted fabrics

The yarn pullout test is a prevailing and particular method to evaluate the effects of yarn properties and the structural characteristics of the fabric on the fabric mechanical performance. In this research, a theoretical model of yarn pull out is presented to determine the reserved energy of weft-knitted fabrics with rib 1 × 1 structure. This model is based on the fabric dimensional properties, i.e. stitch length, wale density, yarn diameter and contact angle of yarns. In order to appraise the proposed model, five different double jersey weft-knitted fabrics with rib 1 × 1 structure were produced and exposed to pullout test. Comparison between deviations of theoretical results from experimental results demonstrates that the presented theoretical model exhibits a rational estimation of the reserved energy in these fabrics.     

Towards the performance evaluation of 4th generation wireless communication standards: LTE versus Mobile WiMAX

Advances in wireless communication protocols and networking toward support of the next generation of mobile and radio broadband technologies have contributed to a strong competition among various telecommunication standards in particular Long Term Evolution (LTE) and Mobile Worldwide Interoperability for Microwave Access (WiMAX). In this paper, we provide an in‐depth comparison analysis of LTE and Mobile WiMAX at the physical (PHY) layer by studying the most similar PHY configuration scenarios for these two technologies. Our study includes a throughput analysis of downlink (DL) and uplink (UL) transmissions in time division duplex with the least overhead possible and different antenna schemes as well as modulation and code rates. This study also performs an overhead analysis in both protocols to provide a more in‐depth understanding of the PHY layer capacity in various PHY layer configurations. Our simulation results generally show higher performance for LTE in both DL and UL transmission with 7 Mbps in DL and 5 Mbps in UL, when using one antenna port. However, by increasing the number of antennas for multiple‐input/multiple‐output configurations, the results illustrate a reduction in the performance of LTE compared to Mobile WiMAX. This arises from the increase in reference signal overhead in LTE from 4.7% in single‐input/single‐output (SISO) to 14.28% in 4 × 4 multiple‐input/multiple‐output (MIMO). Copyright © 2013 John Wiley & Sons, Ltd.     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

CO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>-free hydrogen and carbon nanofibers production by methane decomposition over nickel-alumina catalysts

Nickel catalysts supported on mesoporous nanocrystalline gamma alumina with various nickel loadings were prepared and employed for thermocatalytic decomposition of methane into CO _x -free hydrogen and carbon nanofibers. The prepared catalysts with different nickel contents exhibited mesoporous structure with high surface area in the range of 121.3 to 66.2m²g^?1. Increasing in nickel content decreased the pore volume and increased the crystallite size. The catalytic results revealed that the nickel content and operating temperature both play important roles on the catalytic performance of the prepared catalysts. The results showed that increasing in reaction temperature increased the initial conversion of catalysts and significantly decreased the catalyst lifetime. Scanning electron microscopy (SEM) analysis of the spent catalysts evaluated at different temperatures revealed the formation of intertwined carbon filaments. The results showed that increasing in reaction temperature decreased the diameters of nanofibers and increased the formation of encapsulating carbon.     

Protective properties of PPy‐Au nanocomposite coatings prepared by sonoelectrochemisty and optimized by the Taguchi method

The polypyrrole (PPy) and polypyrrole‐Au (PPy‐Au) nanocomposite films have been sonoelectrochemically synthesized on St‐12 steel electrodes using the galvanostatic technique. Experimental design according to the Taguchi method has been applied to optimize the factors on the synthesis of PPy‐Au nanocomposite coating. Three factors were used to design an orthogonal array L9: Synthesis time (t), Current density (I), and Concentration of HAuCl₄ (C). The synthesized Au nanoparticles during polymerization were characterized by Ultraviolet–visible (UV‐visible) spectroscopy. Characterization of the surfaces was done by scanning electron microscope (SEM), energy dispersive X‐ray spectrum (EDX), and atomic force microscope (AFM). The scanning electron microscopy (SEM) image of PPy shows a smooth surface while PPy‐Au nanocomposite film has a compact morphology. Moreover, energy dispersive X‐ray spectrum (EDX) is evidence for the incorporation of Au nanoparticles. The corrosion protection of coatings was investigated by open circuit potential (OCP) time trends, potentiodynamic polarization technique, and electrochemical impedance spectroscopy (EIS) in a NaCl 3.5% solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41087.     

Two-step purification strategy for enhanced recovery of recombinant hepatitis B surface antigen from Pichia pastoris

Univariate screening on factors affecting the purification performance of recombinant hepatitis B surface antigen (HBsAg) on ion exchange chromatography (IEC) and size exclusion chromatography (SEC) and the establishment of a two-step purification strategy were performed. Amongst four IEC adsorbents examined, the use of Q Sepharose XL IEC adsorbent under optimized conditions together with optimized SEC purification was able to efficiently purify HBsAg. An established purification strategy comprising the two techniques further demonstrated adaptability for scale-up operations with a final total purification factor (PF) of 94.82 ± 16.20, HBsAg purity of 95.48% and recovery yield of 78.07%.     

Optimizing the location of the gas injection well during gas assisted gravity drainage in a fractured carbonate reservoir using artificial intelligence

Gas assisted gravity drainage (GAGD) is a novel subdivision of gas injection method. In this method the injection wells are located in the upper bed of the oil zone, and the production wells are drilled at the bottom bed of the oil zone. Reservoir simulation is among the decision tools for investigating production rate and selecting the best scenarios for developing the oil and gas fields. Selecting the location of the injection wells for reaching the optimized pressure and production rate is one of the most significant challenges during the injection process. Recent experiences have shown that artificial intelligence (AI) is a reliable solution for taking the mentioned decision appropriately and in a least possible time. This study is attributed to the investigation of applying the artificial neural network (ANN) as an artificial intelligence method and a potent predictor for choosing the most proper location for injection in a GAGD process in a fractured carbonate reservoir. The results of this investigation clearly show the efficiency of the ANN as a powerful tool for optimizing the location of the injection wells in a GAGD process. The comparison between the results of ANN and black oil simulator indicated that the predictions obtained from the ANN is highly reliable. In fact the production flow rate and pressure can be obtained in every possible location of the injection well.     

Preparation and functional properties of fish gelatin–chitosan blend edible films

With the goal of improving the physico-chemical performance of fish gelatin-based films, composite films were prepared with increasing concentrations of chitosan (Ch) (100G:0Ch, 80G:20Ch, 70G:30Ch, 60G:40Ch and 0G:100Ch, gelatin:Ch), and some of their main physical and functional properties were characterised. The results indicated that the addition of Ch caused significant increase (p < 0.05) in the tensile strength (TS) and elastic modulus, leading to stronger films as compared with gelatin film, but significantly (p < 0.05) decreased the elongation at break. Ch drastically reduced the water vapour permeability (WVP) and solubility of gelatin films, as this decline for the blend film with a 60:40 ratio has been of about 50% (p < 0.05). The light barrier measurements present low values of transparency at 600 nm of the gelatin–chitosan films, indicating that films are very transparent while they have excellent barrier properties against UV light. The structural properties investigated by FTIR and DSC showed a clear interaction between fish gelatin and Ch, forming a new material with enhanced mechanical properties.     

Tocol Composition and Supercritical Carbon Dioxide Extraction of Lipids from Barley Pearling Flour

Samples of whole grain and 35% pearling flour of 20 different barley varieties grown in Alberta were analyzed for their lipid contents. Total lipid contents of whole grains were within 1.9% to 3.0% (w/w), whereas those of the 35% pearling flour were 4.3% to 7.9%. Lipids of 35% pearling flour fraction of Tercel barley were extracted using supercritical carbon dioxide (SC‐CO₂) at different pressures (24, 45, and 58 MPa) and temperatures (40 and 60 °C) for 3 h. Lipid recoveries of 73% to 97% were achieved using SC‐CO₂ extraction under different operational conditions. Tocol contents and compositions of whole grain, 35% pearling flour, and SC‐CO₂ extracts were analyzed using HPLC. Tocol content of the whole grain was 53.8 to 124.9 μg/g and that of the pearling flour was 195 to 363 μg/g of flour. The hulless barley varieties were higher in tocols, with waxy, double waxy and Tercel varieties having the highest levels (P < 0.05). The ratios of total tocotrienols to total tocopherols varied within 1.6 to 3.9 range. Tocol concentrations of SC‐CO₂ extract fractions varied from 1171 to 4391 μg/g extract depending on the operational conditions. Barley oil is a good natural source of different tocol isomers rich in tocotrienols.