铝系阻燃剂阻燃PP的力学性能研究

将用偶联剂处理的碱式碳酸铝镁加入到聚丙烯中，通过对体系阻燃性、力学性能等研究得出：碱式碳酸铝镁能够对聚丙烯起到良好的阻燃效果，碱式碳酸铝镁的加入提高了聚丙烯的冲击强度，当碱式碳酸铝镁质量分数为23％时，体系的冲击强度最高。研究了偶联荆的用量对体系力学性能的影响，结果表明，随偶联荆用量的增加，体系的拉伸强度降低，冲击强度先升高后降低，当偶联荆质量分数为1．0％时，体系的冲击强度最高。     

Epitaxy growth and directed crystallization of high-density polyethylene in the oriented blends with isotactic polypropylene

Various lamellar orientations of high-density polyethylene (HDPE), due to competition between bulk nucleation and interfacial nucleation, have been realized in its melt drawn blends with isotactic polypropylene (iPP) upon cooling after subjected to 160 °C for 30 min. Directed crystallization, with heterogeneous nucleation in the bulk (within domains), is defined as lamellar growth along boundary of anisotropic domains and is favored in larger domains at higher temperature (slow cooling), since overgrowth of lamellae can feel the interface rather than impingement with neighbor ones as a result of scare nuclei at higher temperature. Moreover, lamellar growth caused by directed crystallization is dependent of dimension of confinement. Due to 2D confinement of cylindrical domains, lamellae can only grow along the axis of cylinder and thus b-axis orientation is formed. While in the layered domains with 1D confinement, however, lamellae grow with the normal of (110) plane along the melt drawn direction. On the other hand, epitaxial growth of HDPE chains onto iPP lamellae is related to the surface-induced crystallization and dominated by the interfacial nucleation. Only interfacial nucleation is preferred can epitaxial growth occur. Therefore, retarded crystallization, realized by either strong confinement in finer domains or rapid cooling or both, is favorable for it.     

Effects of dietary oils and methyl ethyl ketone peroxide onin vivo lipid peroxidation and antioxidants in rat heart and liver

Weanling male Sprague-Dawley rats were fed diets for four weeks which differed in their content of n−6 (corn oil; CO) and n−3 fatty acids (fish oil; FO), but were similar in their content of saturated and monounsaturated fatty acids and vitamin E. At the end of the four-week feeding period, each dietary group was subdivided into two groups. One group received a single placebo injection of α-tocopherol-stripped corn oil (TSCO); the other group received a single injection of the free radical generator, methyl ethyl ketone peroxide (MEKP), in TSCO. Twenty-four hours after injection, the effect of dietary oil and MEKP treatment on endogenous lipid peroxide (LPO) production (measured as methylene blue formed by the “Determiner LPO” assay), glutathione (GSH) and vitamin E content, and fatty acid composition of phosphatidylcholine and phosphatidylethanolamine in heart and liver from unfasted animals were measured. FO-fed rats had significantly heavier hearts and livers, increased levels of n−3 fatty acids in membrane phospholipids, and higher liver LPO levels than CO-fed rats. MEKP treatment resulted in significantly lower body weights and liver GSH levels. The data indicate that dietary n−3 fatty acids increase lipid peroxidation in liver somewhat more than in heart. The study also demonstrates that the effect of induced oxidative stress due to a single dose of MEKP on lipid peroxide formation and antioxidant status in tissues from unfasted animals was independent of the dietary oils.     

Synthesis and characterization of in situ polymerized segmented thermoplastic elastomeric polyurethane/layered silicate clay nanocomposites

Nanocomposites based on thermoplastic elastomeric polyurethane (TPU) and layered silicate clay were prepared by in situ synthesis. The properties of nanocomposites of TPU with unmodified clay were compared with that of organically modified clay. The nanocomposites of the TPU and organomodified clay showed better dispersion and exhibited superior properties. Exfoliation of the clay layers was observed at low organoclay contents, whereas an intercalated morphology was observed at higher clay contents. As one of major purposes of this study, the effect of the silicate layers in the nanocomposites on the order–disorder transition temperature (T_ODT) of the TPU was evaluated from the intensity change of the hydrogen‐bonded and free carbonyl stretching peaks and from the peak position change of the N? H bending peak. The presence of the organoclay increased T_ODT by approximately 10°C, which indicated improved stability in the phase‐separated domain structure. The layered silicate clay caused a tremendous improvement in the stiffness of the TPU; meanwhile, a reduction in the ultimate elongation was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3048–3055, 2006     

Synthesis and characterization of polystyrene initiated using polymeric peroxide

Polymer peroxides were synthesized by copolymerizing tert‐butyl‐3‐isopropenylcumylperoxide (D‐120) with styrene (St). Exothermic peak at 192.7°C in DSC thermogram indicated that peroxy bonds in D‐120 remained intact during the copolymerizing process. The polymeric peroxide was used to initiate polymerization of St. GPC results showed that polystyrene (PS) initiated by the polymeric peroxides was composed of both linear and branched molecules. In addition, the rheology test showed that PS samples initiated by polymeric peroxide contained branched structure and had lower shear viscosities. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 197–202, 2006     

分散染料在涤/锦双组分纤维上色差的色度学分析

将涤 /锦复合丝分离成单一组分的超细涤纶和锦纶。用常用的分散染料同浴染色后 ,测定了各染色样品的颜色三刺激值 ,并经过色度学计算。实验分析表明 ,分散染料对锦纶染色物的反射光主波长值较相应涤纶染色物向长波方向移动 ;蒽醌类分散染料在锦纶上的得色量较小 ,彩度较低 ;而偶氮类分散染料对涤 /锦染色的总色差较小 ,较适合于涤 /锦复合丝的染色。     

Preparation and Characterization of a Chloroperoxidase-like Catalytic Antibody

The small molecule, meso-tetra(α,α,α,α-o-phenylacetamidophenyl) porphyrin (Mr1147.0) was used as complete antigen to elicit MAb through the immunization and cell fusion techniques. The MAb 1F2 obtained was demonstrated to be very pure by MALDI/TOFMS. The subtype of MAb 1F2 is IgG2a, which has a relative molecular weight of 156,678.8 Da.No significant change in the intensity of absorption peaks in UV and CD spectra was observed over a pH range between 6 and 12. The high stability of the abzyme and the tight binding between Fe porphyrin and antibody were also demonstrated. V_max, K_m, κcat, κcat/K_m for abzyme are 5.18 × 10⁻⁸ Ms⁻¹, 1.50 × 10⁻⁸ M, 0.518 s⁻¹, 3.45 × 10⁷ M⁻¹s⁻¹, respectively. The data obtained indicate that catalytic antibody has high catalytic activity. The chloroperoxidase activity of MAb 1F2-Fe porphyrin complex is stable from 10 °C to 60 °C.     

Fabrication of polysulfone asymmetric hollow‐fiber membranes by coextrusion through a triple‐orifice spinneret

Polysulfone (PSf) asymmetric hollow‐fiber membranes, which have a dense outer layer but a loose inner layer, were tentatively fabricated by coextrusion through a triple‐orifice spinneret and a dry/wet‐phase inversion process. Two simple polymer dopes were tailored, respectively, for the dense outer layer and the porous inner layer according to the principles of the phase‐inversion process. By adjusting the ratio of the inner/outer extrusion rate, the hollow‐fiber membranes with various thicknesses of outer layers were achieved. The morphology of the hollow‐fiber membranes was exhibited and the processing conditions and the water permeability of the membrane were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 259–266, 2004     

德日犯罪论体系与我国犯罪论体系的关系

德日犯罪论体系与我国的犯罪论体系之间既有相同点,也有区别,相对于德日刑法论体系,我国的犯罪论体系既有优点,也存在不少缺点.     

电子设备的多学科优化设计研究

自行研制的专用于复杂电子设备的多学科优化设计平台及其关键技术,通过利用专业建模软件建立几何模型,并将其导入结构仿真软件、电磁仿真软件、热仿真软件进行多学科耦合仿真,进而对电子设备进行多学科优化设计.运用该软件,用户可以快速建立几何模型,对电子设备进行多学科仿真和优化设计,既方便用户使用,又提高设计效率.