Development of Pure Poly Vinyl Chloride (PVC) with Excellent 3D Printability and Macro- and Micro-Structural Properties

Unmodified polyvinyl chloride (PVC) has low thermal stability and high hardness. Therefore, using plasticizers as well as thermal stabilizers is inevitable, while it causes serious environmental and health issues. In this work, for the first time, pure food-grade PVC with potential biomedical applications is processed and 3D printed. Samples are successfully 3D printed using different printing parameters, including velocity, raster angle, nozzle diameter, and layer thickness, and their mechanical properties are investigated in compression, bending, and tension modes. Scanning electron microscopy is also used to evaluate the bonding and microstructure of the printed layers. Among the mentioned printing parameters, raster angle and printing velocity influence the mechanical properties significantly, whereas the layer thickness and nozzle diameter has a little effect. Images from scanning electron microscopy  also reveal that printing velocity greatly affects the final part's quality regarding defective voids and rasters’ bonding. The maximum tensile strength of 88.55 MPa is achieved, which implies the superiority of 3D-printed PVC mechanical properties compared to other commercial filaments. This study opens an avenue to additively manufacture PVC that is the second most-consumed polymer with cost-effective and high-strength features.     

4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure,Programming, and Shape Memory Performance

In this research, polyvinyl chloride (PVC) with excellent shape-memory effects is 4D printed via fused deposition modeling (FDM) technology. An experimental procedure for successful 3D printing of lab-made filament from PVC granules is introduced. Macro- and microstructural features of 3D printed PVC are investigated by means of wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) techniques. A promising shape-memory feature of PVC is hypothesized from the presence of small close imperfect thermodynamically stable crystallites as physical crosslinks, which are further reinforced by mesomorphs and possibly molecular entanglement. A detailed analysis of shape fixity and shape recovery performance of 3D printed PVC is carried out considering three programming scenarios of cold (T_g −45 °C), warm (T_g −15 °C), and hot (T_g +15 °C) and two load holding times of 0 s, and 600 s under three-point bending and compression modes. Extensive insightful discussions are presented, and in conclusion, shape-memory effects are promising,ranging from 83.24% to 100%. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state-of-the-art shape-memory materials library for 4D printing, and provide pertinent results that are instrumental in the 3D printing of shape-memory PVC-based structures.     

Object color preferences

In this article, we investigate how context influences color preferences by comparing preferences for “contextless” colored squares with preferences for colors of a variety of objects (e.g., walls, couches, and T‐shirts). In experiment 1, we find that hue preferences for contextless squares generalize relatively well to hue preferences for imagined objects, with the substantial differences being in the saturation and lightness dimensions. In experiments 2 and 3, we find that object color preferences are relatively invariant when the objects are (a) imagined to be the color that is presented as a small square, (b) depicted as colored images of objects, and (c) viewed as actual physical objects. In experiment 4, we investigate the possibility that object color preferences are related to the degree to which colors help objects fulfill particular functions or outcomes. We also discuss relations between our results and previous theories of color preference. © 2012 Wiley Periodicals, Inc. Col Res Appl, 38, 393–411, 2013     

Isolation and Characterisation of a Ferrirhodin Synthetase Gene from the Sugarcane Pathogen Fusarium sacchari

FSN1, a gene isolated from the sugar‐cane pathogen Fusarium sacchari, encodes a 4707‐residue nonribosomal peptide synthetase consisting of three complete adenylation, thiolation and condensation modules followed by two additional thiolation and condensation domain repeats. This structure is similar to that of ferricrocin synthetase, which makes a siderophore that is involved in intracellular iron storage in other filamentous fungi. Heterologous expression of FSN1 in Aspergillus oryzae resulted in the accumulation of a secreted metabolite that was identified as ferrirhodin. This siderophore was found to be present in both mycelium and culture filtrates of F. sacchari, whereas ferricrocin is found only in the mycelium, thus suggesting that ferricrocin is an intracellular storage siderophore in F. sacchari, whereas ferrirhodin is used for iron acquisition. To our knowledge, this is the first report to characterise a ferrirhodin synthetase gene functionally.     

Probability distributions of gas hydrate formation

Induction time distributions for gas hydrate formation were measured for gas mixtures of methane + propane at pressures up to 11.3 MPa using a high‐pressure automated lag time apparatus (HP‐ALTA). Measurements were made at subcooling temperatures between 4.3 and 13.5 K and, while isothermal induction times between 0 and 15,000 s were observed, the median isothermal induction times for the distributions ranged from 100 to 4000 s. A hyperbolic relationship between median induction time and subcooling was used to correlate the data. A graphical interpretation is presented that relates the two types of data that can be acquired by using the HP‐ALTA in one of two modes to study hydrate formation: induction time distributions at constant subcooling and formation temperature distributions observed during linear cooling ramps. The equivalence of these two modes provides a robust method for studying the variation of formation phenomena in different hydrate systems. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2640–2646, 2013     

Challenges in nucleic acid‐lipid films for transfection

The use of surface‐based methods for the delivery of therapeutics has recently generated increasing interest. These platforms have tremendous potential to minimize detrimental side effects associated with systemic delivery by localizing the therapeutic vehicle, and thus provide higher local doses for improved efficacy. Cationic lipids are one of the most commonly used synthetic carriers for the delivery of genetic cargo, such as DNA and RNA. However, reports on the use of lipid‐based films for gene delivery are scarce. Here we investigate the use of a lipid‐based film for the in vitro delivery of plasmid DNA. Solid DNA‐lipid films show very low levels of transfection, while identical complexes prepared for bolus delivery provide high levels of transfection when used directly. We investigate the mechanism, whereby the activity of these solid‐state films is lost and suggest methods for circumventing these challenges and restoring the efficacy of these films as gene delivery platforms. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3203–3213, 2013     

Semitransparent polymer solar cells

Bulk heterojunction based polymer:fullerene solar cells have attracted intensive research interest both in academic and industrial communities in the last two decades, mainly related to their potential low‐cost production process. A power conversion efficiency of over 10% has been reported recently, making the commercialization of this clean and cheap solar energy convertor a realistic prospect for the near future. The intrinsic features of semitransparency and color tunability of the thin polymeric photoactive films are the greatest asset for polymer solar cells. Recently, aesthetic semitransparent polymer solar cells (ST‐PSCs) that can be integrated into transparent windows, roofs, glass and other semitransparent architectural elements have received much attention. In this perspective paper, we present the progress in achieving high performance ST‐PSCs, discuss the requirements for transparent electrodes, focusing on alternatives to tin‐doped indium oxide, and address the challenges ahead to make ST‐PSC viable for real applications. © 2013 Society of Chemical Industry     

3-D molecular assembly of function in titania-based composite material systems

Various examples of composite titania-based nanostructured materials exhibiting cooperative functionalities between different active components are presented. The fabrication of these integrated composite materials is based on one-pot supramolecular templating techniques combined with acidic sol-gel chemistry. The defined 3-D nanoscale organization and integration of various functional components results in advanced optoelectronic and photonic applications such as visible light sensitization of mesoporous titania photocatalysts with cadmium sulfide nanocrystals acting as sensitizing integral part of the mesopore wall structure, narrow bandwidth emission from rare earth ion activated nanocrystalline mesoporous titania films, and mirrorless lasing in dye-doped hybrid organic/inorganic mesostructured titania waveguides.