GaInAsSb/GaSb pn photodiodes for detection to 2.4 mu m

Ga/sub 0.77/In/sub 0.23/As/sub 0.20/Sb/sub 0.80//GaSb pn heterojunction photodiodes have been prepared by liquid phase epitaxy. They exhibit a long-wavelength threshold of 2.4 mu m. The room-temperature dark current at V=-0.5 V is 3 mu A (10 mA/cm/sup 2/) and the external quantum efficiency is around 40% in the wavelength range 1.75-2.25 mu m. The estimated detectivity D* at 2.2 mu m is 8.8*10/sup 9/ cm Hz/sup 1/2/ W/sup -1/.<>     

Charge-Gated Thin-Film Transistors for High Resolution Digital Imaging Applications

A field-effect thin-film transistor (TFT) with two gates, which are charge and voltage gates, is introduced. By applying a proper voltage to the voltage gate, the device is biased at a desired operating point or turned on and off, whereas the amount of charge deposited on the charge gate, which is embedded inside the dielectric, shifts the threshold voltage and therefore modulates the drain-source current. Such device finds application in sensor circuits, particularly high resolution sensor arrays, where it replaces both the transconducting amplifier and the addressing switch transistor, thus reducing transistor count per pixel. Device structure, operation, and characteristics are derived and discussed. A planar configuration of the charge-gated TFT was fabricated by using top-gate amorphous silicon TFTs and implemented in a 100-mum -pitch two-transistor active pixel sensor test structure.     

Noise Figure Reduction in Externally Modulated Analog Fiber-Optic Links

An octave-bandwidth microwave photonic link with a third-order limited spurious-free dynamic range of 121 dB in a 1-Hz bandwidth has been demonstrated. The link noise figure of 9 dB at a modulation frequency of 2 GHz was achieved by using a bias-shifted Mach-Zehnder modulator with an optical input power of 500 mW. This level of performance was realized without electronic or optical linearization     

High‐Performance Manganese Hexacyanoferrate with Cubic Structure as Superior Cathode Material for Sodium‐Ion Batteries

Sodium manganese hexacyanoferrate (Na_xMnFe(CN)₆) is one of the most promising cathode materials for sodium‐ion batteries (SIBs) due to the high voltage and low cost. However, its cycling performance is limited by the multiple phase transitions during Na⁺ insertion/extraction. In this work, a facile strategy is developed to synthesize cubic and monoclinic structured Na_xMnFe(CN)₆, and their structure evolutions are investigated through in situ X‐ray diffraction (XRD), ex situ Raman, and X‐ray photoelectron spectroscopy (XPS) characterizations. It is revealed that the monoclinic phase undergoes undesirable multiple two‐phase reactions (monoclinic ? cubic ? tetragonal) due to the large lattice distortions caused by the Jahn–Teller effects of Mn³⁺, resulting in poor cycling performances with 38% capacity retention. The cubic Na_xMnFe(CN)₆ with high structural symmetry maintains the structural stability during the repeated Na⁺ insertion/extraction process, demonstrating impressive electrochemical performances with specific capacity of ≈120 mAh g^?1 at 3.5 V (vs Na/Na⁺), capacity retention of ≈70% over 500 cycles at 200 mA g^?1. In addition, the TiO₂//C‐MnHCF full battery is fabricated with an energy density of 111 Wh kg^?1, suggesting the great potential of cubic Na_xMnFe(CN)₆ for practical energy storage applications.     

Miniaturized integrated antennas for far-field wireless powering

This paper describes a series of high-efficiency miniaturized antennas of different sizes that can be integrated with the same wireless-powered RFID chip. Since this RFID chip has power scavenging capability in different ISM bands, several integrated on-chip and off-chip antennas in the three ISM bands of 900 MHz, 2.4 GHz and 5.8 GHz are designed, including one antenna integrated on chip. All proposed antennas are derived from a new planar antenna structure which can be designed toward arbitrary input impedance within a given area constraint. The measurement results for the presented antennas show a different read range. The resulting read range versus antenna size diagram specifies the best operating frequency band for a given read range and occupied area. Though this diagram depends on the chip's specifications like the power-on sensitivity and input impedance, it can be generated for any chip. In addition, the measurement results concerning read range and radiation patterns for the proposed antennas are presented and compared with simulation results, showing very good agreement.     

Everything over IP — an overview of the strategic change in voice and data networks

This paper investigates the changes that are required in networking technology for ‘everything over IP’ to become a reality. Initially the changes that are taking place in the telecommunications industry are reviewed. This review ranges from a discussion about the companies installing massive global IP networks to the emergence of novel routeing technologies, e.g. multi-protocol label switching (MPLS) and terabit router technologies. The role of existing telecommunications operators is then discussed, along with the reasons why they are developing interworking and intelligence layers based on distributed computing principles to support all their networks — mobile, fixed, broadband and IP.     

The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

A smart multi-user massive MIMO system for next G Wireless communications using evolutionary optimized antenna selection

Recently multiserver queues with setup times have been extensively studied because they have applications in power-saving data centers. A challenging model is the M/M/c/Setup queue where a server is turned off when it is idle and is turned on if there are some waiting jobs. Recently, Gandhi et al. (in: Proceedings of the ACM SIGMETRICS, pp. 153–166, ACM, 2013; Queueing Syst. 77(2):177–209, 2014) obtain the generating function of the number of jobs in the system, as well as the Laplace transform of the response time using the recursive renewal reward approach and the distributional Little’s law (Keilson and Servi in Oper Res Lett 7(5):223– 227, 1988). In this paper, we derive exact solutions for the joint stationary queue length distribution of the same model using two alternative methodologies: generating function approach and matrix analytic method. The generating function approach yields exact closed form expressions for the joint stationary queue length distribution and the conditional decomposition formula. On the other hand, the matrix analytic approach leads to an exact recursive algorithm to calculate the joint stationary distribution and performance measures so as to provide some application insights.     

Structural and opto-electrical properties of pyrolized ZnO-CdO crystalline thin films

A series of ZnO-CdO thin films of different molar ratios of Zn and Cd have been deposited on glass substrate at substrate temperature ~ 360 ℃ by the spray pyrolysis technique at an ambient atmosphere. X-ray diffraction (XRD) studies confirmed the polycrystalline nature of the film and modulated crystal structures of wurtzite (ZnO) and cubic (CdO) are formed. The evaluated lattice parameters, and crystallite size are consistent with literature. Dislocation density and strain increased in the film as the grain sizes of ZnO and CdO are decreased. The band gap energy varies from 3.20 to 2.21 eV depending on the Zn/Cd ratios in the film. An incident photon intensity dependent I-V study confirmed that the films are highly photosensitive. Current increased with the increase of the intensity of the light beam. The optical conductivity and the optical constants, such as extinction coefficient, refractive index and complex dielectric constants are evaluated from transmittance and reflectance spectra of the films and these parameters are found to be sensitive to photon energy and displayed intermediate optical properties between ZnO and CdO, making it preferable for applications as the buffer and window layers in solar cells.     

Reducing Test Time in the High-Volume Production of Analog Circuits using Efficient Test-Vector Generation and Interpolation Techniques

Test cost is one of the main factors determining the profit margin of a device in production. Current test strategies require hundreds of measurements to determine the specifications of a parameter. In this paper, we present an automatic test-vector generation technique that is based on transfer function manipulation and requires only one circuit simulation. The proposed method consists of generating the first set of vectors by applying a derivation technique to the golden transfer function of the circuit under test (CUT). An interpolation technique allows a new transfer function to be constructed based on the first set of test vectors. The difference between the reconstructed transfer function and the golden transfer function is used to select the second set of test vectors. These new test vectors are selected to achieve the best possible fit. Our technique reduces the test vector size to values that at present can be achieved only by using powerful and time-consuming fault simulation tools. As an example, we apply the method to state variable and Chebyshev filters. We also compute the fault coverage in order to demonstrate the effectiveness of this new technique.