Micromechanics of solvent crazes in polystyrene

Double exposure holographic interferometry (DEHI) is used to determine the strain energy release rate, craze opening displacement profile, and craze stress profile ofn-heptane and methanol crazes growing from cracks in polystyrene.n-heptane crazes have strain energy release rates (SERRs) close to those of cracks and their stress profile is almost crack-like in that the tensile stress across the craze falls almost to zero. On the other hand, the SERRs of methanol crazes are only 30 to 55% the SERR of a crack depending on stress intensity factorK _I of the precrack from which they are grown. The stress profile of the methanol craze shows it to be strongly load-bearing away from the craze tip, apparently as a result of the strain hardening of the craze fibrils. The stress concentration in front of the methanol craze tip is only 40% of that in front of then-heptane craze tip. The opening displacements of the methanol craze are almost as large as those of a crack very near its tip but are much less than those of a crack at large distances behind the tip. The Dugdale model of a strip yielding zone provides a poor representation of the craze opening displacements of the growing methanol craze. Dry (static) methanol crazes have larger opening displacements in response to an incremental tensile strain at moderate prestrains than at either low or high prestrains, suggesting that the craze fibrils undergo a yielding/strain-hardening process as the strain is increased similar to that observed in polycarbonate crazes by Kopp and Kambour. Dryn-heptane crazes do not show this response but rather open linearly with increasing prestrain. The opening displacement for long (dry)n-heptane crazes is almost crack-like whereas the largest opening of a dry methanol craze is only 20% of that of a crack. Dry methanol crazes break at aK _IC that is 40% of theK _IC of precracked but uncrazed specimens. The strongest (shortest) dryn-heptane crazes fail at only 7% ofK _IC of uncrazed specimens and theK _IC of the dryn-heptane crazes decreases markedly with increasing craze length.     

A theory of pad conditioning for chemical-mechanical polishing

Statistical models are presented to describe the evolution of the surface roughness of polishing pads during the pad-conditioning process in chemical-mechanical polishing. The models describe the evolution of the surface-height probability-density function of solid pads during fixed height or fixed cut-rate conditioning. An integral equation is derived for the effect of conditioning on a foamed pad in terms of a model for a solid pad. The models that combine wear and conditioning are then discussed for both solid and foamed pads. Models include the dependence of the surface roughness on the shape and density of the cutting tips used in the conditioner and on other operating parameters. Good agreement is found between the model, Monte Carlo simulations and with experimental data.     

Perceptual and cognitive load interact to control the spatial focus of attention.

Caparos and Linnell (2009, 2010) used a variable-separation flanker paradigm to show that (a) when cognitive load is low, increasing perceptual load causes spatial attention to focus and (b) when perceptual load is high, decreasing cognitive load causes spatial attention to focus. Here, we tested whether the effects of perceptual and cognitive load on spatial focus remain when, respectively, cognitive load is high and perceptual load is low. We found that decreasing cognitive load only causes spatial attention to focus when perceptual load is high and the stimulus encourages this. Moreover, and contrary to the widely held assumption that perceptual load focuses attention automatically (Lavie, Hirst, de Fockert, & Viding, 2004), perceptual load exerts its focusing effect only with the engagement of cognitive resources when cognitive load is low. In sum, perceptual and cognitive mechanisms exert interacting effects and operate in concert to focus spatial attention. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Plane stress deformation zones at crack tips in polycarbonate

The plastic deformation produced crack tips in polycarbonate (PC) films stretched in tension, has been characterized by optical and transmission electron microscopy. An extensive and diffuse region of deformation is formed in unannealed specimens. Within this zone the ratio (v _f) of local film thickness to the (undeformed) thickness far away from the crack varies gradually both along and across the zone. The minimum ratio of 0.5 occurs at the crack tip. In contrast to this behaviour, films annealed for a short time just below the glass transition temperature T _g showed a highly localized response, the plastic strain being confined to a well-defined flame shaped deformation zone (DZ) ahead of the crack. Within most of this DZ, v _f is constant at 0.7, rising to 1 over a distance of 10 m at the zone tip, and falling to 0.5 over a distance of 4 m around the crack tip. Bi-refringence measurements show that a high degree of molecular orientation occurs within the zone. These experiments support the idea that an increase in the localization of the plastic strain response upon annealing below T _g is responsible for the embrittlement of PC by such heat treatment.     

Genetic Elements Orchestrating Lactobacillus crispatus Glycogen Metabolism in the Vagina

Glycogen in the female lower reproductive tract is a major carbon source for colonization and acidification by common vaginal Lactobacillus species, such as Lactobacillus crispatus. Previously, we identified the amylopullulanase encoding gene pulA of Lactobacillus crispatus to correlate with the ability to autonomously utilize glycogen for growth. Here, we further characterize genetic variation and differential regulation of pulA affecting the presence of its gene product on the outer surface layer. We show that alpha-glucan degrading activity dissipates when Lactobacillus crispatus is grown on glucose, maltose and maltotriose, in agreement with carbon catabolite repression elements flanking the pulA gene. Proteome analysis of the S-layer confirmed that the amylopullulanase protein is highly abundant in an S-layer enriched fraction, but not in a strain with a defective amylopullulanase variant or in an amylopullulanase-sufficient strain grown on glucose. In addition, we provide evidence that Lactobacillus crispatus pulA mutants are relevant in vivo, as they are commonly observed in metagenome datasets of human vaginal microbial communities. Analysis of the largest publicly available dataset of 1507 human vaginal metagenomes indicates that among the 270 samples that contain a Lactobacillus crispatus pulA gene, 62 samples (23%) had a defective variant of this gene. Taken together, these results demonstrate that both environmental, as well as genetic factors explain the variation of Lactobacillus crispatus alpha-glucosidases in the vaginal environment.     

Water-assisted sub-critical crack growth along an interface between polyimide passivation and epoxy underfill

Direct chip attach (DCA) microelectronic packaging technology is gaining prominence due to its numerous advantages. Delamination (debonding) of the underfill epoxy/ polyimide passivation interface of a DCA during hydro-thermal reliability testing has always been one of the salient problems. We have studied the water-assisted sub-critical crack growth along this interface and our measurement offers important clues as to the origins of the poor hydro-thermal testing results for these interfaces. A modified asymmetric double cantilever beam (ADCB) testing technique has been used to measure the sub-critical crack growth velocity v at various relative humidities and temperatures as a function of the crack driving force (strain energy release rate) G ^*. The presence of a significant partial pressure of water p _H2O produces a marked decrease (by up to a factor of 12) in the threshold G ^* for crack growth at measurable velocities. Above the threshold log v rises linearly with but then enters a regime where the crack velocity (v=v ^*) is almost independent of . Finally, at the values of G ^* corresponding to rapid crack propagation in the absence of water, log v increases very rapidly with G ^*. By analogy to the classic work on water-assisted sub-critical crack growth in silica-based glasses, where very similar features are observed, we believe that the sub-critical crack growth along the polyimide-epoxy interface results from stress-assisted hydrolysis of primary covalent bonds, in our case ester bonds across the interface. The regime of just above the threshold corresponds to a physicochemical situation where the water activity (p _{H 2O} ) at the crack tip is the same as that of the gaseous environment. In the regime where v=v ^* constant, the water activity at the crack tip is below that in the environment and the crack growth velocity is limited by the transport of water vapor to the bonds ahead of the crack tip. We develop a model of this crack growth following Wiederhorn 1967 that allows us to predict the sub-critical crack growth as a function of G ^* for arbitrary relative humidity and temperature conditions.     

Tumor-Localized Administration of α-GalCer to Recruit Invariant Natural Killer T Cells and Enhance Their Antitumor Activity against Solid Tumors

Invariant natural killer T (iNKT) cells have the capacity to mount potent anti-tumor reactivity and have therefore become a focus in the development of cell-based immunotherapy. iNKT cells attack tumor cells using multiple mechanisms with a high efficacy; however, their clinical application has been limited because of their low numbers in cancer patients and difficulties in infiltrating solid tumors. In this study, we aimed to overcome these critical limitations by using α-GalCer, a synthetic glycolipid ligand specifically activating iNKT cells, to recruit iNKT to solid tumors. By adoptively transferring human iNKT cells into tumor-bearing humanized NSG mice and administering a single dose of tumor-localized α-GalCer, we demonstrated the rapid recruitment of human iNKT cells into solid tumors in as little as one day and a significantly enhanced tumor killing ability. Using firefly luciferase-labeled iNKT cells, we monitored the tissue biodistribution and pharmacokinetics/pharmacodynamics (PK/PD) of human iNKT cells in tumor-bearing NSG mice. Collectively, these preclinical studies demonstrate the promise of an αGC-driven iNKT cell-based immunotherapy to target solid tumors with higher efficacy and precision.     

Laminin as a Biomarker of Blood–Brain Barrier Disruption under Neuroinflammation: A Systematic Review

Laminin, a non-collagenous glycoprotein present in the brain extracellular matrix, helps to maintain blood–brain barrier (BBB) integrity and regulation. Neuroinflammation can compromise laminin structure and function, increasing BBB permeability. The aim of this paper is to determine if neuroinflammation-induced laminin functional changes may serve as a potential biomarker of alterations in the BBB. The 38 publications included evaluated neuroinflammation, BBB disruption, and laminin, and were assessed for quality and risk of bias (protocol registered in PROSPERO; CRD42020212547). We found that laminin may be a good indicator of BBB overall structural integrity, although changes in expression are dependent on the pathologic or experimental model used. In ischemic stroke, permanent vascular damage correlates with increased laminin expression (β and γ subunits), while transient damage correlates with reduced laminin expression (α subunits). Laminin was reduced in traumatic brain injury and cerebral hemorrhage studies but increased in multiple sclerosis and status epilepticus studies. Despite these observations, there is limited knowledge about the role played by different subunits or isoforms (such as 411 or 511) of laminin in maintaining structural architecture of the BBB under neuroinflammation. Further studies may clarify this aspect and the possibility of using laminin as a biomarker in different pathologies, which have alterations in BBB function in common.