Video mediated social interaction between groups: System requirements and technology challenges

This paper discusses results from research related to the use of television as a device that supports social interaction between close-knit groups in settings that include more than two locations, each location being potentially equipped with more than one camera. The paper introduces the notion of a framing experience, as a specific scenario or situation within which social communication takes place. It reports on the evaluation of some of the key attributes of social communication through semi-structured interviews, with 16 families across four European countries. The inferences drawn from this study are reduced to four system capabilities including the ability to support: excitement, engagement and entertainment; high quality, reliable audiovisual communications; flexibility and adaptability sufficient to support the unpredictable and reactive nature of human interaction and discourse. These system requirements are, in turn, reduced to a number of technology challenges which if solved will help enable effective social communications between groups, mediated by the television. These technology challenges include: high quality reliable audio visual communication; interaction orchestration, multimedia interpretation and multimedia composition. Finally the paper reflects on the impact the use of framing experiences, such as those described here, could have on strategy and policy for service providers and regulators.     

Supply chain coordination and setup cost reduction in case of asymmetric information

Previous research shows that asymmetric information triggers a decrease of lot sizes compared to the supply chain optimum. Thus, the setup costs per period are suboptimally high. To analyse, whether setup cost reduction can mitigate this effect, we extend the standard framework of lotsizing decisions under asymmetric information by allowing investments in setup cost reduction. We find that asymmetric information tends to lead to an overinvestment in setup cost reduction. The overall effect of setup cost reduction on supply chain performance is therefore ambiguous. We show that these results hold for a wide variety of investment functions.     

Effects of gage length, loading rates, and damage on the strength of PPTA fibers

Axial tension and transverse compression experiments on single fibers were performed to investigate the mechanical behavior of three high-performance fibers (Kevlar^®, Kevlar^® 129, and Twaron^®) with diameters in the order of 9-12 μm. The single fibers were manufactured from 1998 through 2008. A miniaturized tensile Kolsky bar was used to determine the tensile response of PPTA single fibers at a high strain rate. Gage length and strain rate were found to have minimum effects on the tensile strength of PPTA single fibers. Manufacturing time over a decade was found to have negligible effects on the tensile strength of the fibers. Initial transverse compression on the fibers reduces their ultimate tensile strengths. A high resolution scanning electron microscope (SEM) was also used to examine the fracture modes of transversely deformed fibers. Different types of fracture morphology were observed.     

Crystallography and Morphology of Niobium Carbide in As-Cast HP-Niobium Reformer Tubes

The microstructures of two as-cast heats of niobium-modified HP stainless steels were characterized. Particular attention was paid to the interdendritic niobium-rich carbides formed during solidification of these alloys. At low magnifications, these precipitates are grouped in colonies of similar lamellae. Higher magnifications revealed that the lamellae actually obtain two distinct morphologies. The type I morphology exhibits broad planar interfaces with a smooth platelike shape. Type II lamellae have undulating interfaces and an overall reticulated shape. To provide further insight into the origin of these two different morphologies, the microstructure and crystallography of each have been studied in detail using high resolution scanning electron microscopy, transmission electron microscopy, various electron diffraction methods (electron backscatter diffraction (EBSD), selected area diffraction (SAD), and convergent beam electron diffraction (CBED)), and energy dispersive X-ray spectroscopy.     

Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used

The influence of the type of backsheet on the electrical performance of test modules was evaluated before and after increasing time of accelerated ageing (damp heat [DH] exposure). Besides the measurement of the electrical power of the modules and the performance of the cells by electroluminescence, the ageing‐induced changes within the polymeric encapsulate and backsheets were investigated by means of vibrational spectroscopy and by thermo analytical methods. In addition, the permeability of the backsheets in the original and aged state was determined. This wide set of test parameters and methods allowed for the detection of correlations between (i) physical and chemical properties as well as their ageing‐induced changes of the materials and (ii) the module performance. A clear dependence of the relative loss in power output upon exposure under DH conditions for 2000 h could be observed for a set of identical test modules varied in composition only in the type of back cover used. While the modules containing gas‐tight backsheets and glass experienced only little loss in the relative power output, some modules with permeable backsheets showed a significant relative decrease in the power output and fill factor in dependence of the backsheet type used. Cell degradation could be visualised by recording electroluminescence images before and after the accelerated ageing test. The permeation properties of the backsheet used and their ageing‐induced changes seem to have an influence on the module performance. However, the absolute values neither of the water vapour transmission rate (WVTR) nor of the oxygen transmission rate (OTR) are directly linked to the loss in power output upon accelerated ageing under DH conditions. It could be shown that the ageing‐induced changes (relative transmission rates) between WVTR and OTR can be correlated with the module performance. These ageing‐induced changes in the permeation behaviour of the backsheets can be explained by (i) physical changes (e.g. post‐crystallisation, changes in the crystal structure or the crystalline microstructure) and (ii) chemical ageing effects such as a decrease in the molecular mass of the polyester (PET) polymer chains because of hydrolytic polymer degradation leading to a change in the crystallisation behaviour of PET. Hydrolytic degradation (= chemical ageing) of the PET core layer was observed (with varying extent) for all PET‐based backsheets and can, thus, not be directly correlated with the loss in performance of the corresponding test modules. The physical ageing effects, however, were detected only for those backsheets showing (i) strong deviating changes in the relative permeation rates for oxygen and water vapour upon accelerated ageing and (ii) a clear loss in electrical performance. Copyright © 2015 John Wiley & Sons, Ltd.