Affinities of dopamine analogs for monoamine granular and plasma membrane transporters: implications for PET dopamine studies

Affinities of dopamine (DA) analogs to both granular and plasma membrane uptake transporters were measured in vitro by inhibition of [3H]DA uptake in bovine chromaffin granule ghosts and C6 glial cells transfected with cDNA for the rat presynaptic dopamine transporter, respectively. Five amines were studied: DA, 6-fluorodopamine (6FDA), m-tyramine (MTA), 6-fluoro-m-tyramine (6FMTA), and beta-fluoromethylene-m-tyramine (FMMTA). Direct uptake of 18F labeled 6FDA and 6FMTA was also measured in the chromaffin granule system and compared with [3H]DA uptake. Results show that the transporter affinities of 6FDA and MTA were similar to that of DA in both transport systems while affinities of 6FMTA and FMMTA were lower. Furthermore while the direct uptake of DA and FDA in chromaffin granules were essentially identical and significantly reserpine-inhibitable, the direct uptake of 6FMTA was about 15-fold less and only minimally sensitive to reserpine pretreatment. Thus, although vesicular protection and reuptake may influence the turnover of FDA in 6-fluoroDOPA studies, they are unlikely to be important determinants of the kinetics of the slowly clearing components in studies with either 6-fluoro-m-tyrosine (6FMT) or 6-fluoro-beta-fluoro-methylene-m-tyrosine (6FFMMT), the bioprecursors of 6FMTA and 6-fluoro-FMMTA, respectively. These results are consistent with the finding that the longterm component in 6FMT PET studies is 6-fluoro-hydroxyphenylacetic acid (6FHPAC), which can be explained by the lack of vesicular protection of 6FMTA from MAO oxidation.     

电工钢片磁性的计量问题

综述了电工钢片计量的当前水平和最新进展,重点讨论了在交变场中的标准测试方法:Epstein方圈法和单片(SST)法.所讨论的相关条款是有关磁通密度控制、数据获取和数据计算的最新电子方法,以及磁路设计对这两种方法的准确性和精度特性的影响,也讨论了系统误差来源、再现特性和经济因素等.     

Ground-based single-frequency microwave radiometric measurement of water vapour

The integrated water vapour content of the atmosphere is measured by a ground-based radiometer at 22.234 GHz at the Instituto Nacional de Pesquisas Espaciais (INPE), Brazil. The data set has been partitioned into two sets: one for no cloud and the other for cloudy conditions. The attenuation (dB) under the no cloud condition was always found to vary within 1.0–1.5 dB, except at around 1400 hrs (local time) through 1800 hrs (local time), and it reached a value of more than 1.5 dB with a maximum at 1700. This is in conformity with the theoretically calculated values of water vapour density over the same location. An effort has been made to get the regression relation between the measured and calculated water vapour content, for which the RMS error was found to be 0.49 kg m^?2.     

Hydration of anhydrite of gypsum (CaSO4.II) in a ball mill

The hydration of an anhydrite of gypsum (CaSO₄.II) in a ball mill was studied as a function of time and temperature. The amount of gypsum formed at different intervals of time was determined by weight loss method and powder X-ray diffraction technique. Specific surface area at different time intervals was determined by LASER granulometric method. The results showed that the maximum rate of formation of gypsum was at a longer time than the time for the development of maximum specific surface area. In the presence of activators, the time for maximum rate of gypsum formation and maximum specific surface area shifted towards lower hydration time. Morphological changes during the course of hydration have been studied by the scanning electron microscopic (SEM) technique. A mechanism of hydration has been proposed.     

Damage analysis of extrusion tools made from the austenitic hot work tool steel Böhler W750

During hot extrusion of copper alloys, extrusion tools have to withstand cyclic thermal and mechanical loads. To enhance the service life of the tools, materials with high temperature strength are designed as well as an optimised process control is performed. To characterise the tool damage evolution during service and to improve process guiding, modelling and simulation are appropriate means. The extrusion process of copper billets at three different temperatures was simulated by an FE-program to obtain the temporal boundary conditions, i.e. stress and temperature distributions at the interface billet-liner. Those boundary conditions were used to simulate the elastic–viscoplastic behaviour of the tool steel Böhler W750 in service by means of Abaqus Standard? v.6.8-3 software in conjunction with Z-Mat package. A lifetime rule was added in order to compute the lifetime consumption and the cycles to failure.     

New Grid Scheduling and Rescheduling Methods in the GrADS Project

The goal of the Grid Application Development Software (GrADS) Project is to provide programming tools and an execution environment to ease program development for the Grid. This paper presents recent extensions to the GrADS software framework: a new approach to scheduling workflow computations, applied to a 3-D image reconstruction application; a simple stop/migrate/restart approach to rescheduling Grid applications, applied to a QR factorization benchmark; and a process-swapping approach to rescheduling, applied to an N-body simulation. Experiments validating these methods were carried out on both the GrADS MacroGrid (a small but functional Grid) and the MicroGrid (a controlled emulation of the Grid).     

Determination of Amylose by Differential Scanning Calorimetry

A differential scanning calorimetry (DSC) method for the determination of amylose as its amylose-L-α-lysophosphatidylcholine (LPC) complex is described. Potato amylose/amylopectin mixtures covering the range of 0–95% amylose were heated in the presence of LPC, cooled and then reheated to follow melting of the amylose-LPC complexes formed during the cooling phase. A linear relationship (r = 0.98) was obtained between the amylose content of the mixtures and the enthalpies of the amylose-lipid complexes. This linear calibration was used to predict the amylose content of various native starches, rice flours, wheat flour, durum wheat semolina, and lyophilized raw potato on the basis of the melting enthalpy of their amylose-LPC complexes. Except for the potato samples, amylose contents determined by the DSC method were in good agreement with those obtained from a colorimetric assay.     

Ex Vivo Fluorescence Confocal Microscopy (FCM) Ensures Representative Tissue in Prostate Cancer Biobanking: A Feasibility Study

Background: Biobanking of prostate carcinoma is particularly challenging due to the actual cancer within the organ often without clear margins. Frozen sections are to date the only way to examine the biobank material for its tumor content. We used ex vivo fluorescence confocal microscopy (FCM) to analyze biobank samples prior to cryoasservation. Methods: 127 punch biopsies were acquired from prostatectomy-specimens from 40 patients. These biopsies were analyzed with a Vivascope 2500-G4 prior to their transfer to the biobank. In difficult cases, larger samples of the prostatectomy specimens were FCM scanned in order to locate tumor foci. After patient acquisition, all samples were taken from the biobank and analyzed. We compared the results of the FCM examinations with the results of conventional histology and measured the DNA content. Results: With upstream FCM, the tumor content of biobank samples could be determined with high confidence. The detection rate of representative biobank samples was increased due to the rapid feedback. The biobank samples were suitable for further molecular analysis. Conclusion: FCM allows for the first time lossless microscopic analysis of biobank samples prior to their cryoasservation and guarantees representative tumor and normal tissue for further molecular analysis.