The Numerical Comparison of Heat Transfer in a Coated and Fixed Bed of an Adsorption Chiller

Ecological adsorption technology is becoming a focus of attention by industry due to the utilization of low grade thermal energy sources for cooling production. It can be a promising part of sustainable development concept of the global economy. Therefore, research aiming at improving their performance i.e. Coefficient of Performance (COP) by optimizing the construction of sorption beds with a built in heat exchanger system is crucial. The heat transfer characteristics between the bed of porous media (sorbent) and surface of the heat exchanger system determine the heating power of an adsorption chiller. The HP increase can be obtained by heat transfer intensification due to the increase in the thermal conductivity of the sorbent layer in the vicinity of the heat exchanger’s surface. The novel modification of the sorbent layer structure is proposed in the paper in order to improve the heat transfer processes in the heat exchanger boundary layer. The analysis of desorption process conditions in the parametric model of a coated and fixed adsorption bed design is presented in the paper. The computational fluid dynamics (CFD) with conjugate heat transfer analysis is used to determine the crucial input parameters (temperature distribution in the sorbent bed) for further analytical calculations. The commercial code Ansys Fluent was used to perform numerical simulations. The developed computational model consisted of three subdomains representing heating water, heat exchanger material (copper) and sorbent (silica gel). The comparison of a novel coated design and a conventional fixed bed is discussed in the paper. The numerical analysis is based on experimental thermal conductivity measurements of the sorbent layer in different configurations, which were performed using Laser Flash Method.     

Reduction of fractures in dried clay-like materials due to specific surfactants

The possibility of fracture reduction as a result of application of specific surfactants during intensive drying of clay-like materials was examined in this paper. The dodecyl sulfate sodium salt (SDS) and the fluoric (FC 4430) surfactants were used for the tests. Different amounts of these surfactants were mixed with distilled water and used for wetting a dry clay material before forming clay samples. The clay samples in the form of cylinders 44 mm in diameter and 50 mm high were extruded and after leveling the moisture distribution subjected to convectively drying in hot air at 120 °C. The acoustic emission (AE) method was used to monitor on line the development of crack formation in dried samples. It was stated that application of surfactants in a prescribed amount may significantly reduce the drying induced fractures in clay during its intensive drying and thus to obtain good quality products by high drying rates.     

Effect of hydrogen on room-temperature plasticity of B2 iron aluminides

Different sensitivities to hydrogen embrittlement for the disordered and ordered B2 FeAl alloys have been investigated. The plasticity of annealed alloys (before hydrogenating) has been found to decrease with increasing the long-range order parameter. An intrinsic weakness of FeAl phase grain boundaries revealed at a high degree of ordering. The results of bending tests on specimens annealed and cathodically charged with hydrogen have shown that the influence of hydrogen on the plasticity diminishes with the increase in the degree of FeAl phase ordering.     

Co-volume method for Riemannian mean curvature flow in subjective surfaces multiscale segmentation

We introduce semi-implicit complementary volume numerical scheme for solving the level setformulation of Riemannian mean curvature flow problem arising in image segmentation, edge detection, missing boundary completion and subjective contour extraction. The scheme is robust and efficient since it is linear, and it is stable in L_∞ and weighted W ^1,1 sense without any restriction on a time step. The computational results related to medical image segmentation with partly missing boundaries and subjective contours extraction are presented.     

On the Interplay of Disorder and Correlations

I address here the question of the mutual interplay of strong correlations and disorder in the system. I consider random version of the Hubbard model. Diagonal randomness is introduced via random on-site energies and treated by the coherent potential approximation. Strong, short ranged, electron - electron interactions are described by the slave boson technique and found to induce additional disorder in the system. As an example I calculate the density of states of the random interacting binary alloy and compare it with that for non-interacting system.     

Shuffle Net: an application of generalized perfect shuffles tomultihop lightwave networks

A multihop wavelength-division multiplexing (WDM) approach, referred to as Shuffle Net, for achieving concurrency in distributed lightwave networks is proposed. A Shuffle Net can be configua19 red with each user having as few as one fixed-wavelength transmitter and one fixed-wavelength receiver, avoiding both wavelength-agility and pretransmission-coordination problems. The network can achieve at least 40% of the maximum efficiency possible with wavelength-agile transmitters and receivers. To transmit a packet from one user to another may require routing the packet through intermediate users, each repeating the packet on a new wavelength until the packet is finally transmitted on a wavelength that the destination user receives. For such a multihop lightwave network, the transmit and receive wavelengths must be assigned to users to provide both a path between all users and the efficient utilization of all wavelength channels     

Channel access and interference issues in multi-code DS-CDMA wireless packet (ATM) networks

Multi-Code Direct-Sequence Code-Division-Multiple-Access (MC-CDMA) has been proposed as a flexible multiple access scheme for wireless packet networks that support a large variety of mobiles with different and even time-varying rates. Using MC-CDMA, traffic streams with significantly different transmission rates can be easily integrated into a unified architecture, with all the transmissions occupying the same bandwidth and having the same spread spectrum processing gain. In this paper, we address medium-access and interference issues in MC-CDMA wireless packet networks. For medium access, we propose and study Multi-Code CDMA (MC-CDMA) with Distributed-Queueing Request Update Multiple Access (DQRUMA) to form a unified bandwidth-on-demand fair-sharing platform for multi-rate wireless services. DQRUMA is an efficient demand-assignment multiple access protocol for wireless access and scheduling. Pseudo-Noise (PN) codes (primary codes) and optimal power levels are allocated to the mobiles on a slot-by-slot basis, and a Maximum Capacity Power Allocation (MCPA) criterion exploits the sub-code concatenation property of the MC-CDMA transmission. Simulation results show that the system provides close to ideal-access performance for multi-rate mobiles, both with homogeneous traffic characteristics and with a mix of heterogeneous traffic characteristics. Finally, we analyze the effects of MC-CDMA intercell interference on the reverse link (i.e., mobile to cell site) and investigate interference reduction by using the Maximum Capacity Power Allocation (MCPA) criterion. Our results show significant reduction in reverse-link MC-CDMA intercell interference is possible using the MCPA criterion.     

Morphological image sequence processing

We present a morphological multi-scale method for image sequence processing, which results in a truly coupled spatio-temporal anisotropic diffusion. The aim of the method is not to smooth the level-sets of single frames but to denoise the whole sequence while retaining geometric features such as spatial edges and highly accelerated motions. This is obtained by an anisotropic spatio-temporal level-set evolution, where the additional artificial time variable serves as the multi-scale parameter. The diffusion tensor of the evolution depends on the morphology of the sequence, given by spatial curvatures of the level-sets and the curvature of trajectories (=acceleration) in sequence-time. We discuss different regularization techniques and describe an operator splitting technique for solving the problem. Finally we compare the new method with existing multi-scale image sequence processing methodologies.