Resonance frequencies of compact microstrip antenna

A simple technique for calculating the resonance frequencies of a compact arrow-shaped microstrip antenna is presented and discussed. The accuracy of the method is validated by experimental results     

Compact asymmetric coplanar waveguide filter

The design and implementation of a novel asymmetric coplanar waveguide (ACPW) band rejection filter using defected ground structure (DGS) is presented. The proposed ACPW DGS technology provides bandgap characteristics with only one cell in the lateral ground plane. The equivalent circuit model of the proposed DGS unit section is described. Measurements of ACPW DGS showed good agreement with simulation and the proposed model.     

Analysis of a new compact microstrip antenna

A new compact microstrip antenna element is analyzed. The analysis can accurately predict the resonant frequency, input impedance, and radiation patterns. The predicted results are compared with experimental results and excellent agreement is observed. These antenna elements are more suitable in applications where limited antenna real estate is available     

Microwave Characteristics of Polyaniline Based Short Fiber Reinforced Chloroprene Rubber Composites

This report presents the microwave characteristics of conducting polymer composites (CPCs) based on chloroprene rubber with special reference to dielectric properties. CPCs based on polyaniline (PANI), polyaniline-coated short nylon fiber (PANI-N) and chloroprene rubber (CR) were prepared by mechanical mixing. The important properties like dielectric permittivity, loss tangent, conductivity, and dielectric heating coefficient were evaluated and compared. It was found that PANI/CR composites had very good dielectric properties in the microwave range. The addition of PANI-N improved the mechanical properties of the composites with reasonably good dielectric properties. The CPCs were also found to have good microwave absorption.     

Tape Casting and Dielectric Properties of Zn2Te3O8-Based Ceramics with an Ultra-Low Sintering Temperature

The suitability of dielectric ceramics made of zinc tellurate (Zn₂Te₃O₈) and titanium dioxide (TiO₂) with an ultra-low sintering temperature (650°C) for tape casting and thus for the multimodule technique with Al electrodes was investigated. The properties of the tape before and after sintering as well as the amount of organic additives for the casting process and a thermal analysis of the tape up to 1000°C are reported. In addition, electrodes on a multilayer module made on stacked tapes were prepared using Al paste and postfiring, followed by relative permittivity and loss tangent measurements to verify the electrical performance of the whole structure. The dielectric properties of the stacked module without any electrodes were also measured. The results show that the composition is well suited for the tape process but extra care should be taken especially with the proper sintering temperature for optimized electrical performance.     

Low-Temperature Sintering and Microwave Dielectric Properties of Li2MgSiO4 Ceramics

Development of a low-temperature sintered dielectric material derived from Li₂MgSiO₄ (LMS) for low-temperature cofired ceramic (LTCC) application is discussed in this paper. The LMS ceramics were prepared by the solid-state ceramic route. The calcination and sintering temperatures of LMS were optimized at 850°C/4 h and 1250°C/2 h, respectively, for the best density and dielectric properties. The crystal structure and microstructure of the ceramic were studied by the X-ray diffraction and scanning electron microscopic methods. The microwave dielectric properties of the ceramic were measured by the cavity perturbation method. The LMS sintered at 1250°C/2 h had ɛ_r=5.1 and tan δ=5.2 × 10⁻⁴ at 8 GHz. The sintering temperature of LMS is lowered from 1250°C/2 h to 850°C/2 h by the addition of both lithium borosilicate (LBS) and lithium magnesium zinc borosilicate (LMZBS) glasses. LMS mixed with 1 wt% LBS sintered at 925°C/2 h had ɛ_r=5.5 and tan δ=7 × 10⁻⁵ at 8 GHz. Two weight percent LMZBS mixed with LMS sintered at 875°C/2 h had ɛ_r=5.9 and tan δ=6.7 × 10⁻⁵ at 8 GHz.     

New simulated corrugated scattering surface giving wideband characteristics

Simultaneous elimination of specular reflection and backscattered power from a plane metallic surface by simulated corrugated surfaces of constant period and variable strip width for TM polarisation is reported. This new configuration offers almost a ten-fold frequency bandwidth compared with a regularly spaced strip grating of the same size.<>     

Synthesis and characterization of MWCNT/TiO2 /Au nanocomposite for photocatalytic and antimicrobial activity.

A novel combination of titanium oxide (TiO₂)/gold (Au)/multiwalled carbon nanotubes (MWCNTs) nanocomposite (NC) was synthesised by sol– gel method. MWCNT functionalisation by modified Hummers method. TiO₂ /Au nanoparticles (NPs) were synthesised by biological method using Terminalia chebula bark extract. MWCNT/TiO₂ /Au NC samples were characterised by X‐ray diffraction, ultraviolet–visible–diffuse reflectance spectra, microRaman, scanning electron microscopy and high‐resolution‐transmission electron microscopy analyses. The photocatalytic performance of the obtained for NC toward the decomposition of congo‐red and the antimicrobial activity for inhibition of Gram positive (Bacillus subtilis, Streptococcus pneumonia and Staphylococcus aureus), Gram negative (Shigella dysenderiae, Proteus vulgaris and Klebsiella pneumonia) and fungal strains have been evaluated and the results are compared with positive control ampicillin. The metal and metal–oxide NPs have a lower sorption capacity. The herbicidal bond to the tested CNTs by the combination of electron donor–acceptor interactions and hydrogen bonds. In particular, the dispersion of NC and control of sodium borohydride, it has more efficient effect on the photodegradation and antibacterial activity of positive control of ampicillin. The NC material has exhibited maximum photodegradation and antibacterial activity results of zone of inhibition when compared with control samples.Inspec keywords: nanocomposites, nanoparticles, titanium compounds, gold, multi‐wall carbon nanotubes, nanofabrication, sol‐gel processing, catalysis, photodissociation, antibacterial activity, microorganisms, X‐ray diffraction, reflectivity, Raman spectra, ultraviolet spectra, visible spectra, hydrogen bonds, scanning electron microscopy, transmission electron microscopy, dyes, sorption, nanobiotechnologyOther keywords: titanium oxide‐gold‐multiwalled carbon nanotubes nanocomposite, sol‐gel method, photocatalytic activity, antimicrobial activity, MWCNT functionalisation, modified Hummers method, nanoparticles, biological method, Terminalia chebula bark extract, X‐ray diffraction, ultraviolet‐visible‐diffuse reflectance spectra, microRaman spectra, scanning electron microscopy, high‐resolution‐transmission electron microscopy, congo‐red decomposition, Gram positive bacteria, Bacillus subtilis, Streptococcus pneumonia, Staphylococcus aureus, Shigella dysenderiae, Proteus vulgaris, Klebsiella pneumonia, fungal strains, Gram negative bacteria, sorption capacity, herbicidal bond, electron donor‐acceptor interactions, hydrogen bonds, sodium borohydride, photodegradation, metal‐oxide nanoparticles, C‐TiO₂ ‐Au     

New high permittivity and low loss ceramics in the BaO–TiO2–Nb2O5 composition

New dielectric ceramics with formula BaTi3Nb4O17 and Ba6Ti14Nb2O39 have been prepared and characterized. BaTi3Nb4O17 was densified to 92% of TD after firing at 1310 °C for 4 h. However, Ba6Ti14Nb2O39 fired under optimized conditions (1260 °C for 4 h) showed only 85% TD together with secondary phase. The crystal system of both of the compositions is orthorhombic. The BaTi3Nb4O17 has r56, Qu2100 (at 4.402 GHz), f+86 p.p.m. K-1 and Ba6Ti14Nb2O39 as r50, Qu650 (4.359 GHz) and f+165 p.p.m. K-1. © 1998 Kluwer Academic Publishers