Ledge-flow-controlled catalyst interface dynamics during Si nanowire growth

Self-assembled nanowires offer the prospect of accurate and scalable device engineering at an atomistic scale for applications in electronics, photonics and biology. However, deterministic nanowire growth and the control of dopant profiles and heterostructures are limited by an incomplete understanding of the role of commonly used catalysts and specifically of their interface dynamics. Although catalytic chemical vapour deposition of nanowires below the eutectic temperature has been demonstrated in many semiconductor-catalyst systems, growth from solid catalysts is still disputed and the overall mechanism is largely unresolved. Here, we present a video-rate environmental transmission electron microscopy study of Si nanowire formation from Pd silicide crystals under disilane exposure. A Si crystal nucleus forms by phase separation, as observed for the liquid Au-Si system, which we use as a comparative benchmark. The dominant coherent Pd silicide/Si growth interface subsequently advances by lateral propagation of ledges, driven by catalytic dissociation of disilane and coupled Pd and Si diffusion. Our results establish an atomistic framework for nanowire assembly from solid catalysts, relevant also to their contact formation.     

Roles of polymeric dispersant charge density on lead zirconate titanate aqueous processing

Poly(acrylic acid) (PAA) and poly(acrylic acid-co-maleic acid) (PACM) were used as dispersants in preparation of lead zirconate titanate (PZT) aqueous suspensions. The effects of dispersant structure on particle stabilization were investigated through properties of the suspensions. Viscosity and sedimentation height measurements showed that addition of the dispersants improved particle stabilization. The dispersant concentrations to obtain the lowest viscosity were 0.4 wt% for PAA and 0.2 wt% for PACM based on powder dried weight basis. Furthermore, effects of pH were studied on the suspensions prepared with 0.2 wt% dispersants. Viscosity and sedimentation behaviors indicated the improvements of particle dispersion and suspension stability with an increasing pH. Particle dispersion revealed by laser light scattering and scanning electron microscopy supported an improvement of particle dispersion at alkaline pHs. Detailed analysis of these data indicated that the PACM exhibited higher dispersant efficiency for PZT aqueous suspension in all conditions. The results were discussed based on the concentrations of anionic –COO^? groups at various pHs and charge density along polymeric backbone of the dispersants.     

Feasibility Study of 45-nm-Node Scaled-Down Cu Interconnects With Molecular-Pore-Stacking (MPS) SiOCH Films

A feasibility study was done for 45-nm-node Cu interconnects using a novel molecular-pore-stacking (MPS) SiOCH film (k = 2.45), taking electron scattering in the scaled-down Cu lines into consideration. The as-deposited MPS SiOCH film, formed by plasma polymerization of a robust six-member-ring (hexagonal) siloxane with large steric-hindered hydrocarbon side chains, has self-organized subnanometer pores. An oxidation-damage-free dual-hard-mask etching process, along with a benzocylobuten liner technique, preserved the low permittivity of the MPS film in the Cu lines, with excellent interline dielectric reliability. The line aspect ratio was also balanced to decrease not only the interconnect parasitic capacitance but also the Cu line resistivity, which is increased by the electron scattering in the narrow lines. By combining the above etching process and the line-aspect control, the feasibility of the MPS SiOCH film was confirmed with outstanding performance and excellent reliability for the 45-nm-node ultralarge scale integrations     

Sorption of phosphates on Al-pillared smectites and mica at acidic to neutral pH

To investigate sorption behaviors and mechanisms of phosphates, phosphate sorption (hereafter, P sorption) experiments were carried out for synthetic montmorillonite, beidellite, saponite, and fluor-tetrasilicic expandable mica pillared with cationic, Keggin ion-like, Al clusters (Al_clst). The P sorption experiments were done in the final pH range of 3 to 7 at room temperature and at an initial concentration of 3.2 mmol/l P. The P sorption maxima for the Al_clst samples were 0.66–0.87 mmol/g, which are higher by about 2 orders of magnitude than those for smectites without Al_clst pillars. The sorption ability of the Al_clst samples is nearly as high as that of Al-bearing minerals and materials such as boehmite and amorphous Al hydroxide, which are regarded as effective absorbents to remove P from water. Examinations by X-ray diffraction analysis, infrared spectroscopy, scanning electron microscopy, and analytical transmission electron microscopy indicated that the P sorption is mostly related to the OH functional groups of the Al_clst pillars, but little to the P species in solution, the reactive sites on the edge surface of smectites and mica, or possible precipitates. The P sorption maxima increased with increasing an amount of Al_clst pillars in the Al_clst samples, suggesting that the P sorption maximum is determined by the number of the OH functional groups of the Al_clst pillars and is independent of the structures and chemical compositions of the host phases.     

Erythromycin modulates IL-8 expression in normal and inflamed human bronchial epithelial cells

Previous studies have shown that blood plasma levels of 17alpha, 20beta-dihydroxy-4-pregnen-3-one (DHP) and 17alpha, 20beta, 21-trihydroxy-4-pregnen-3-one (20beta-S) increase in striped bass (Morone saxatilis) undergoing final oocyte maturation (FOM). Both hormones are produced by ovarian fragments undergoing hCG-induced germinal vesicle breakdown (GVBD) in vitro. In the present study, we investigated binding of DHP and 20beta-S to ovarian membranes from striped bass undergoing FOM. Saturable binding sites for DHP were not detected. Saturation of 20beta-S binding sites with 5 nM [3H]20beta-S occurred within 40 min at 0 degrees C (at 3 min, half of the maximum specific binding of steroid was calculated to have occurred), and the binding was pH-dependent. Scatchard analyses revealed the presence of a single class of high-affinity (dissociation constant [Kd] = 1.4 +/- 0.2 nM), limited-capacity (estimated concentration [Bmax] = 2.7 +/- 0.3 pmol/g ovary) 20beta-S binding sites on membranes from striped bass ovaries undergoing FOM. In contrast, only low levels of specific binding (Bmax < 0.04 pmol/g tissue) were detected on membranes from testes, liver, brain, and muscle. Ovarian membranes prepared from vitellogenic females also had low levels (Bmax < 0.1 pmol/g ovary) of specific 20beta-S binding, less than 5% of that found during FOM. Results of competition assays showed that DHP was approximately 250 times less effective than 20beta-S for displacing 20beta-S from ovarian membranes. In contrast, 20beta, 21-dihydroxy-4-pregnen-3-one was a very effective competitor, although it is only a weak inducer of oocyte GVBD in vitro. Of several other steroids tested, only progesterone showed affinity for the 20beta-S binding site within a physiological range of concentrations. Taken together with previous studies of striped bass FOM, these findings indicate that 20beta-S is the oocyte maturation-inducing steroid hormone in striped bass.     

Optical property of poly(9,9-dioctylfluorene) gel with β phase and application to polymer light emitting diode

Poly (9,9-dioctylfluorene)(F8) gel with β phase has been investigated in terms of optical absorption, photoluminescence measurements and Fourier transform infrared spectroscopy. The optical properties of the F8 gel markedly changed in the temperature range from 70 to 80 °C owing to the vibration of polymer chain related to the glass transition temperature of F8. F8 films by thermal printing method had the characteristic particulate morphology. Current efficiencies of polymer light emitting diodes (PLEDs) with the β phase of F8 fabricated by the thermal printing method were better than that with the amorphous phase of F8 by the spin-coating method. We demonstrate the β phase effects of PLEDs characteristics by the thermal printing method.     

Activity of two histidine decarboxylases from Photobacterium phosphoreum at different temperatures, pHs, and NaCl concentrations

The major causative agent of scombroid poisoning is histamine formed by bacterial decarboxylation of histidine. The authors reported previously that histamine was exclusively formed by the psychrotrophic halophilic bacteria Photobacterium phosphoreum in scombroid fish during storage at or below 10 degrees C. Moreover, histamine-forming ability was affected by two histidine decarboxylases: constitutive and inducible enzymes. This article reports the effect of various growth and reaction conditions, such as temperature, pH, and NaCl concentration, on the activity of two histidine decarboxylases that were isolated and separated by gel chromatography from cell-free extracts of P. phosphoreum. The histidine decarboxylase activity of the cell-free extracts was highest in 7 degrees C culture; in 5% NaCl, culture growth was inhibited, and growth was best in the culture grown at pH 6.0. Moreover, percent activity of the constitutive and inducible enzymes was highest for the inducible enzyme in cultures grown at 7 degrees C and pH 7.5 and in 5% NaCl. The temperature and pH dependences of histidine decarboxylase differed between the constitutive and inducible enzymes; that is, the activity of histidine decarboxylases was optimum at 30 degrees C and pH 6.5 for the inducible enzyme and 40 degrees C and pH 6.0 for the constitutive enzyme. The differences in the temperature and pH dependences between the two enzymes extended the activity range of histidine decarboxylase under reaction conditions. On the other hand, histidine decarboxylase activity was optimum in 0% NaCl for the two enzymes. Additionally, the effects of reaction temperature, pH, and NaCl concentration on the constitutive enzyme activity of the cell-free extracts were almost the same as those on the whole histidine decarboxylase activity of the cell-free extracts, suggesting that the constitutive enzyme activity reflected the whole histidine decarboxylase activity.     

A 1-Gb DRAM for file applications

A time-shared offset-canceling sensing scheme, a defective word-line Hi-Z standby scheme, and a flexible multimacro architecture have been developed for 1-Gb DRAM. These circuit technologies have been applied to a 1-Gb DRAM for file applications employing 0.25 μm CMOS process technology, a diagonal bit-line cell, and a two-stage pipeline circuit technique. In this DRAM, a 30% chip size reduction and a 400-MB/s data transfer rate have been achieved. A 100% improvement in yield has been estimated by Monte-Carlo simulation. The 1-Gb DRAM die size is 936 mm². The cell size is 0.54 μm². The operating current is 58 mA at 2 V and 100 MHz     

Laboratory-performance study of the notified methods to detect genetically modified papaya (55-1)

To investigate important factors affecting the reliability of the analytical results, proficiency tests were attempted for the histochemical method (GUS method) and the qualitative PCR method (PCR method) to detect genetically modified papaya (55-1) in the Japanease official method. The test samples were distributed to twenty-three laboratories that participated in the study and were examined according to the protocol. All the data collected from participating laboratories were statistically analyzed. In the PCR method, one negative sample was detected as positive using detection primers in one laboratory, though the sample was negative when checked using confirmation primers. Contamination might have occurred in the step of the preparation of the PCR sample solution using detection primers. In the GUS method, all the test samples were identified as expected. Thus, all the laboratories reported correct results overall.     

Effect of glass fiber hybridization on properties of sisal fiber–polypropylene composites

Natural fiber reinforced polymer composites became more attractive due to their light weight, high specific strength, and environmental concern. However, some limitations such as low modulus, poor moisture resistance were reported. This study aimed to investigate the effect of glass fiber hybridization on the physical properties of sisal–polypropylene composites. Polypropylene grafted with maleic anhydride (PP-g-MA) was used as a compatibilizer to enhance the compatibility between the fibers and polypropylene. Incorporating glass fiber into the sisal–polypropylene composites enhanced tensile, flexural, and impact strength without having significant effect on tensile and flexural moduli. In addition, adding glass fiber improved thermal properties and water resistance of the composites.