Microscopic and electrochemical characterization of lead film electrode applied in adsorptive stripping analysis

Lead film electrodes (PbFEs) deposited in situ on glassy carbon or carbon paste supports have recently found application in adsorptive stripping voltammetric determination of inorganic ions and organic substances. In this work, the PbFE, prepared in ammonia buffer solutions, was investigated using scanning electron microscopy, atomic force microscopy and various voltammetric techniques. The microscopic images of the lead films deposited on the glassy carbon substrate showed a considerable variability in microstructure and compactness of the deposited layer depending on the selected experimental conditions, such as the concentration of Pb(II) species, the nucleation and deposition potential, and the time applied. The catalytic adsorptive systems of cobalt and nickel in a solution containing 0.1 ammonia buffer, 2.5 × 10⁻⁵ M nioxime and 0.25 M NaNO₂ were employed to investigate the electrochemical characteristics and utility of the in situ prepared lead films.The optimal parameters, i.e. the lead concentration in the solution, the procedure of film removal, and the time and potential of lead nucleation and film deposition for the adsorptive determination of metal traces, were selected, resulting in the very good reproducibility (RSD = 4.2% for 35 scans) of recorded signals. The voltammetric utility of the lead film electrode was compared to that of glassy carbon, mercury film and bismuth film electrodes, and was subsequently evaluated as superior.     

On tracking robustness in adaptive extremum seeking control of the fuel cell power plants

In this paper is proposed an optimization approach, based on optimal utilization of the power harmonics from the probing signal by including a band-pass filter in the feedback loop of the extremum seeking control (ESC) scheme. The ESC is used to track the maximum power point (MMP) of fuel cell power, and presence of the first and second power harmonics in the probing signal assure this tracking capacity. The MPP tracking robustness is improved by including the third power harmonics into the probing signal, given for probing signal amplitude a time adaptive variation depending of third derivate of the fuel cell power. The MPP tracking is demonstrated and the ESC robustness is proved by simulation in case of using a recommended current ripple factor.     

Diminazene Aceturate Stabilizes Atherosclerotic Plaque and Attenuates Hepatic Steatosis in apoE-Knockout Mice by Influencing Macrophages Polarization and Taurine Biosynthesis

Atherosclerosis and nonalcoholic fatty liver disease are leading causes of morbidity and mortality in the Western countries. The renin–angiotensin system (RAS) with its two main opposing effectors, i.e., angiotensin II (Ang II) and Ang-(1–7), is widely recognized as a major regulator of cardiovascular function and body metabolic processes. Angiotensin-converting enzyme 2 (ACE2) by breaking-down Ang II forms Ang-(1–7) and thus favors Ang-(1–7) actions. Therefore, the aim of our study was to comprehensively evaluate the influence of prolonged treatment with ACE2 activator, diminazene aceturate (DIZE) on the development of atherosclerotic lesions and hepatic steatosis in apoE^−/− mice fed a high-fat diet (HFD). We have shown that DIZE stabilized atherosclerotic lesions and attenuated hepatic steatosis in apoE^−/− mice fed an HFD. Such effects were associated with decreased total macrophages content and increased α-smooth muscle actin levels in atherosclerotic plaques. Moreover, DIZE changed polarization of macrophages towards increased amount of anti-inflammatory M2 macrophages in the atherosclerotic lesions. Interestingly, the anti-steatotic action of DIZE in the liver was related to the elevated levels of HDL in the plasma, decreased levels of triglycerides, and increased biosynthesis and concentration of taurine in the liver of apoE^−/− mice. However, exact molecular mechanisms of both anti-atherosclerotic and anti-steatotic actions of DIZE require further investigations.     

The effect of solar radiation on the flavonol content in broccoli inflorescence

The effect of solar radiation on the quercetin and kaempferol contents in the inflorescence of three broccoli cultivars (‘Lord’, ‘Marathon’ and ‘Fiesta’) was investigated from 1999 to 2001. Great differences in the contents of both flavonols, dependent on growing time and cultivar, were found. Quercetin and kaempferol contents varied from 14.3 to 81.0 mg kg⁻¹ f.w. and from 35.9 to 213 mg kg⁻¹ f.w., respectively. Inflorescences of the cultivar ‘Lord’ were characterised by the highest mean content of quercetin and those of cultivar ‘Fiesta’ of kaempferol. The contents of both flavonols were highly positively correlated with total solar radiation in the period from planting to the harvest of broccoli inflorescences.     

Effect of storage conditions on potassium iodide stability in iodised table salt and collagen preparations

To determine the influence of storage conditions on potassium iodide (KI) stability, its traditional carrier – iodised table salt and alternative collagen carriers (i.e. iodinated collagen fibre and collagen hydrolysate) were stored at high (90%) and medium (60%) relative humidity of air. At medium humidity, these carriers were additionally stored at limited and unlimited access of air. The stability of KI was estimated by determining iodine retention during storage. The obtained results showed that the storage of iodised table salt resulted in iodine content decrease. The iodine losses in the salt tended to increase at high humidity or unlimited access of air. However, application of collagen preparations as carriers increased the KI stability, reducing iodine losses during storage and making them independent on the storage conditions.     

Interfacial reactions of Sn–Zn–Ag–Cu alloy on soldered Al/Cu and Al/Al joints

This work shows the effect on the soldering process of the addition of Ag and Cu to Sn–Zn alloys. Soldering of Al/Cu and Al/Al joints was performed for a time of 3?min, at a temperature of 250°C, with the use of flux. Aging was carried out at 170°C for Al/Cu and Al/Al joints for 1 and 10 days. During the aging process, intermetallic layers grew at the interface of the Al/Cu joint at the Cu substrate. Intermetallic layers were not observed during wetting of Al/Al joints. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed. The experiment was designed to demonstrate the effect of Ag and Cu addition on the dissolution of Al substrate during the soldering and aging processes. In the solder alloys, small precipitates of AgZn₃ and Cu₅Zn₈ were observed.     

Synthesis and Interfacial Activity of Novel Heterogemini Sulfobetaines in Aqueous Solution

Three new heterogemini sulfobetaines and their chloride salts were synthesised. The interfacial activities of the obtained chlorides in aqueous solution were studied by equilibrium and dynamic surface tension measurements. The critical micelle concentration, surface excess concentration, minimum area per surfactant molecule and standard Gibbs energy of adsorption as well as micelle lifetime and diffusion coefficient were determined. The adsorption properties and micelle lifetime of these compounds significantly depend on the length of alkyl chain. The critical micelle concentration decreases with increasing chain length of the compounds considered. The values of the diffusion coefficient of N‐alkyl‐N‐methyl‐N‐(3‐sulfopropyl)‐6‐(N‐alkyl‐N‐methylamino)hexylammonium chloride tend to decrease as the concentration is increased.     

Global maximum power point tracking based on new extremum seeking control scheme

A new perturbed‐based extremum seeking control (PESC) scheme is proposed in this paper to track the global maximum power point (GMPP). The PESC scheme has two control loops based on power of the photovoltaic (PV) array: the first loop operates as usually to track the maximum power point and the second sweeps all local MPPs to locate the GMPP. Once the GMPP is located based on its uniqueness (after the PV pattern is quickly scanned many times, depending on the PV pattern's profile), the GMPP is accurately tracked based on first control loop. The used PV patterns have the profile of the PV power characteristics obtained for PV array under partially shaded conditions (PSCs). This PESC scheme is proposed to track the GMPP in the PV applications, but also in other multimodal problems from industry, being a good motif to revive the specialists' interest for the extremum seeking control field. The results obtained here are very promising for both search speed and tracking accuracy performances of the GMPP under different PSCs simulated on the PV array. Thus, the energy efficiency of PV array controlled with the proposed PESC scheme will increase with more than 1.2% in comparison with that obtained with the other MPP algorithms because of better performance shown by this PESC scheme. A 99.6% tracking accuracy is obtained here in comparison with a maximum 98.4% tracking accuracy reported in the literature. Furthermore, 100% hit and high search speed are obtained here for the GMPP localization. Copyright © 2015 John Wiley & Sons, Ltd.     

Prevalence and predictors of exposure to multiple metals in preschool children from Montevideo, Uruguay

The extent of children's exposure to multiple toxic metals is not well described in many developing countries. We examined metal exposures in young children (6-37 months) from Montevideo, Uruguay and their mothers (15-47 years) participating in a community-based study. Hair samples collected from 180 children and their mothers were analyzed for: lead (Pb), cadmium (Cd), manganese (Mn), and arsenic (As) concentration using inductively coupled plasma-mass spectrometry (ICP-MS). Median metal levels (μg/g) were: Pb 13.69, Mn 1.45, Cd 0.17, and As 0.09 for children and Pb 4.27, Mn 1.42, Cd 0.08, and As 0.02 for mothers. Of the child and maternal samples, 1.7% and 2.9% were below the limit of detection (LOD) for Cd, and 21.3% and 38.5% were below the LOD for As, respectively. Correlations between maternal and child levels ranged 0.38-0.55 (p < 0.01). Maternal hair metal levels were the strongest predictors of metal concentrations in children's hair. Girls had significantly lower As levels than boys (p < 0.01) but did not differ on other metals. In addition, in bivariate logistic regressions predicting the likelihood that the child would be exposed to multiple metals, hemoglobin < 10.5 g/dL (OR = 2.12, p < 0.05), blood lead (OR = 1.17, p < 0.01), and the mother being exposed to two or more metals (OR = 3.34, p < 0.01) were identified as significant predictors of increased likelihood of multiple metal exposure. Older child age (OR = 0.96, p < 0.05), higher maternal education (OR = 0.35, p < 0.01), and higher number of household possessions (OR = 0.83, p < 0.01) were significantly associated with decreased likelihood of multiple metal exposure. Preschool children in Uruguay are exposed to multiple metals at levels that in other studies have been associated with cognitive and behavioral deficits. Sources of exposure, as well as cognitive and behavioral consequences of multiple metal exposure, should be investigated in this population.